• 전자공학회논문지A
• /
• 제30A권7호
• /
• pp.60-74
• /
• 1993

Experiments of RIE of tungsten films using SF$_{6}$ plasma were conducted to investigate the effect of process parameters on etch rate, uniformity, anisotropy, and selectivity. As power increased, the etch rate increased. Maximum etch rate was obtained at 200mtorr As interelectrode spacing increased the etch rate increased for P < 200mtorr while it decreased for P> 200mtorr. Etch rate was maximum at 20 sccm gas flow rate. As substrate temperature increased, the etch rate increased and activation energy was 0.046 eV. In addition, maximum etch rate was acquired at 20% $O_{2}$ addition. The etch rate slightly increased when Ar was added up to 20% while it continuously decreased when N$_{2}$ was added. Uniformity got improved as pressure decreased and was less than 4% for P <100mtorr. Mass spectrometer was utilized to analyze gas composition and S and F peaks were observed from XPS analysis with increasing power. The anisotropy was better for smaller power and spacing, and lower pressure and temperature. It improved when CH$_{4}$ was added and anisotropic etch profile was obtained when about 10% $O_{2}$ was added. The selectjvity was better for smaller power larger pressure and spacing, and lower temperature. Especially. low temperature processing was proposed as a novel method to improve the anisotropy and selectivity.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.61-64
• /
• 2008

$Pr_{0.3}Sr_{0.7}Co_{0.3}Fe_{0.7}O_{3-\delta}$ (PSCF3737) was prepared and characterized as a cathode material for intermediate temperature-operating solid oxide fuel cell (IT-SOFC). X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), extended X-ray absorption fine structure (EXAFS), and electrical property measurement were carried out to study cathode performance of the material. XPS and EXAFS results proved that oxygen vacancy concentration was decreased and lattice constants of the perovskite structure material were increased by doping Fe up to 70 mol% at B-site of the crystal structure, which also extended the distance between oxygen and neighbor atoms. Thermal expansion coefficient (TEC) of PSCF3737 is smaller than that of $Pr_{0.3}Sr_{0.7}CoO_{3-\delta}$(PSC37) due to lower oxygen vacancy concentration. PSCF3737 showed better cathode performance than PSC37. It might be due good adhesion by a smaller difference of TEC between $Gd_{0.1}Ce_{0.9}O_2$ (CGO91) and electrode. Composite material PSCF3737-CGO91 showed better compatibility of TEC than PSCF3737. However, PSCF3737-CGO91 did not represent higher electrochemical property than PSCF3737 due to decreased reaction sites by CGO91.

• Journal of the Korean Wood Science and Technology
• /
• 제10권3호
• /
• pp.135-151
• /
• 1982

In order to investigate the effectiveness of Osmose process for the practical treatment of wood this study has been made using water soluble preservatives such as Malenit and chromated zinc chloride. The results obtained in this investigation are as follows: 1. The penetration of Malenit in sapwood has been observed deeper than that of chromated zinc chloride for all species tested in this investigation. 2. The penetration of preservatives applied in soft wood, ie. Pinus densiflora and Larix leptolepis has been observed better results than that of hard wood, i.e., Quercus accutissima and Carpinus laxiflora. 3. The longer stack covering, despite of preservatives applied and size of wood tested, has given better penetration for all species tested, and the fastest diffusion has been occured in 15 days from they day started. Following after 15 days diffusion had gradualy become slower. 4. The length of time needed for effective penetration has taken 45 days for all species tested, reaching twenty millimeters (20mm) in depth in case of Malnit, that means also more than 50% of penetration into sapwood portion. However it has taken 45 days fer Pinus densiflora and Larix leptolepis, reaching fifteen millimeters (15mm) and 60 days for Quercus accutissima and Carpinus laxiflora, reaching same fifteen millimeters in case of chromated zinc chloride, that means also less than 50% (except 50% for Larix) of penetration into sapwood portion. 5. Deeper penetration of preservatives from the wood surface has been observed in the larger wood than the smaller wood for all species tested, although the penetration ratio between the width of sapwood and the length penetrated has been observed smaller in larger wood than smaller wood. 6. The relation between moisture content of wood and the penetration of preservatives into wood tested has shown the linear regression, that is, the more moisture content brought the deeper penetration. 7. Following the result obtained at this investigation osmose process with Malenit applied has indicated as a useable process for the none pressure treatment of wood.

• 수산경영론집
• /
• 제44권3호
• /
• pp.15-28
• /
• 2013

Abalone aquaculture has developed very rapidly in Korea. Until the mid 1990s it has annually produced about 100 tons. Since then the yield has increased to about 9,000 tons in 2012. The amount accounts for 20% of the global abalone yield. About 86% of produced abalone is consumed domestically and the rest is exported. 100 tons for export seemed as an unattainable goal back in 2003. However, the export rose up to 1,333 tons in 2012. Despite its rapid growth, Korean abalone industry is faced with some problems. The first is the slowdown of yield increase rates. Abalone production increased by 50~60% until the mid 2000. However, the rate continued to drop to below 10%. Reasons behind the slow increase are deteriorating aquaculture grounds and worsening market problems. Constant aquaculture aggravated productivity and overcrowded facilities at a limited space made matters worse. Moreover, abalone export has stalled and so did domestic consumption. In the meantime, rising mortality of young abalone has lowered productivity at abalone breeding places. The mortality rates of abalone remained below 5% in the early 2000s but rose to 30~40% these days. This translates into rising abalone prices. The market problems imply stagnant or shrinking export as well as domestic consumption. The export increase rates took a nosedive from 200 to below 50 between the early 2000s and the late 2000s. Moreover, the increase rates of domestic consumption have become remarkably sluggish. According to, it stood at 50~60% in the mid 2000s but continued to decrease after 2008. These problems, in turn, affected the size of abalone. The usual abalone size for market was 10~12 shells per kg, but recently the size became smaller and smaller to 15~16 shells per kg. The change of size implies shift in consumption patterns: Consumers not only eat live abalone but also they cook soup with it. The size of abalone for uncooked dish is usually very big, like 10~12 shells per kg. In contrast, smaller abalone, such as 20~25 shells per kg, are used for making soup. Increasing use of smaller abalone leads to lower income of abalone aquaculture households. This is partly because that the size determines the price and the price gap between big abalones and smaller ones is extreme in Korea. For the sustainable growth of Korean abalone industry, we need to come up with strategies. First, a reasonable production system needs to be in place, especially for better management of abalone aquaculture grounds. Management of abalone licenses is also necessary because local governments issue relevant licenses as well as supervising abalone grounds. Second, abalone export destination need to be diversified. Japan, the major importer of Korean abalone, takes up a lion's share of export, at 95%. Third, new consumption style of abalone needs to be developed. Abalone used to be consumed as 'raw type' or Sashimi in Korea. This sole type of consumption hampers the growth of abalone market. Moreover, more strategies are needed to encourage and distribute home cooking of abalone rather than eating-out at restaurants. Last but not least, distribution system should be improved for better delivery of live abalone.

• 한국통신학회논문지
• /
• 제22권4호
• /
• pp.706-713
• /
• 1997

In this paper, we propose a band stop filter(BSF) for reducing drag-like effect of the low pass filter(LPF), a block by block adaptive filtering method, and a motion adaptive filtering method, which show better results in terms of PSNR or human visual perception compared to the conventional method using LPF. The BSF improves the draglike effects of the low pass filter by passing temporal high frequency components of video sequences which correspond to objects with large motion. The proposed adaptive methods also improve the conventional adaptive filtering by modifying the conventional algorithm and applying the algorithms for small blocks. The simulation results show that the proposed filtering methods show better results in terms of PSNR and subjective tests in most cases. Also in case of block by block adaptive filtering, it is verified that the application of the algorithm for smaller block gives better results.

• Journal of Nutrition and Health
• /
• 제19권1호
• /
• pp.23-31
• /
• 1986

This study was attempted to investigate the effect of family environment on the dietary quality of adolescence. The subjected were 390 girls aged from 13 to 19 and their mothers in Chung-Nam province area. The survey was conducted from Febril 6 to 16, 1985. The results can be summarized as follows ; 1) The mean dietary score of nutrient adequacy of subjects was 11.85 out of possible 17, which showed that all nutrients intake might be lower than the R.D.A. 2) According to resident place, dietary quality was tended to be better in order of rural place, small city and medium city 9P<0.01). 3) In smaller numbers of family members, dietary quality was tended to be better (P<0.01). 4) Family pattern did not affect the dietary quality. 5) According to socioeconomic status, dietary quality was tended to be better at the upper class(P<0.05). 6) Dietary quality was tended to be better according to the increase of PCEF(per capita expenditure for food). 7) Mother's employment was likely to improve the dietary quality (P<0.01). 8) Dietary quality was tended to be better according to mother's favored attitude toward nutrition(P<0.01). 9) Mother's attitude toward taste affected the dietary quality, but this effect was not constant(P<0.01). 10) Mother's attitude toward family's food preference affected the dietary quality adversely (P<0.01). 11) Mother's score of nutrition knowledge was likely to affect the dietary quality. 12) Dietary quality was positively correlated to health status of subjects. And there was a significantly negative correlation between dietary quality and menarcheal age (P<0.01).

• 반도체디스플레이기술학회지
• /
• 제9권2호
• /
• pp.55-60
• /
• 2010

Ink transfer process from the printing roll to the moving web was investigated using a CFD technique for the application in R2R printed electronics. In line with the requirement that the web handling speed needs to be increased further for the cost competitiveness, the effects of web moving velocity with relatively complex roll patterns were analyzed. To make the present analysis more realistic, the numerical geometry and the ink properties were selected to match those of the real printing production system. Our numerical results showed that both web handling speed and complex printing-roll patterns influenced the shape of the transferred ink. As the web moving speed approaches towards 30mpm, a significant distortion of the shape of the transferred ink occurred. In the range of pattern width smaller than 100 microns, a phase distortion was also found to occur in all the printing-roll patterns considered in the present work but the ratio of the phase distortion to the line width gets smaller as the width becomes smaller. Thus, the web handling speed and the shape of printing-roll pattern will be important elements for the better printing quality under 100 micron line width range.

• Journal of Communications and Networks
• /
• 제6권1호
• /
• pp.46-59
• /
• 2004

In this paper, we present two algorithms for efficiently aggregating link state information needed for quality-of-service (QoS) routing. In these algorithms, each edge node in a group is mapped onto a node of a shufflenet or a node of a de Bruijn graph. By this mapping, the number of links for which state information is maintained becomes aN (a is an integer, N is the number of edge nodes) which is significantly smaller than N2 in the full-mesh approach. Our algorithms also can support asymmetric link state parameters which are common in practice, while many previous algorithms such as the spanning tree approach can be applied only to networks with symmetric link state parameters. Experimental results show that the performance of our shufflenet algorithm is close to that of the full-mesh approach in terms of the accuracy of bandwidth and delay information, with only a much smaller amount of information. On the other hand, although it is not as good as the shufflenet approach, the de Bruijn algorithm also performs far better than the star approach which is one of the most widely accepted schemes. The de Bruijn algorithm needs smaller computational complexity than most previous algorithms for asymmetric networks, including the shufflenet algorithm.

• Journal of the Optical Society of Korea
• /
• 제18권3호
• /
• pp.207-216
• /
• 2014

In this work, we report detailed numerical analysis of the near-elliptic core index-guiding triangular-lattice and square-lattice photonic crystal fiber (PCFs); where we numerically characterize the birefringence, single mode, cut-off behavior and group velocity dispersion and effective area properties. By varying geometry and examining the modal field profile we find that for the same relative values of $d/{\Lambda}$, triangular-lattice PCFs show higher birefringence whereas the square-lattice PCFs show a wider range of single-mode operation. Square-lattice PCF was found to be endlessly single-mode for higher air-filling fraction ($d/{\Lambda}$). Dispersion comparison between the two structures reveal that we need smaller lengths of triangular-lattice PCF for dispersion compensation whereas PCFs with square-lattice with nearer relative dispersion slope (RDS) can better compensate the broadband dispersion. Square-lattice PCFs show zero dispersion wavelength (ZDW) red-shifted, making it preferable for mid-IR supercontinuum generation (SCG) with highly non-linear chalcogenide material. Square-lattice PCFs show higher dispersion slope that leads to compression of the broadband, thus accumulating more power in the pulse. On the other hand, triangular-lattice PCF with flat dispersion profile can generate broader SCG. Square-lattice PCF with low Group Velocity Dispersion (GVD) at the anomalous dispersion corresponds to higher dispersion length ($L_D$) and higher degree of solitonic interaction. The effective area of square-lattice PCF is always greater than its triangular-lattice counterpart making it better suited for high power applications. We have also performed a comparison of the dispersion properties of between the symmetric-core and asymmetric-core triangular-lattice PCF. While we need smaller length of symmetric-core PCF for dispersion compensation, broadband dispersion compensation can be performed with asymmetric-core PCF. Mid-Infrared (IR) SCG can be better performed with asymmetric core PCF with compressed and high power pulse, while wider range of SCG can be performed with symmetric core PCF. Thus, this study will be extremely useful for designing/realizing fiber towards a custom application around these characteristics.

• 한국산학기술학회논문지
• /
• 제12권7호
• /
• pp.2931-2938
• /
• 2011

2상 복합재에 적용되어오던 수정된 Eshelby 모델(MEM)을 두 종류의 구형 입자를 포함하는 3상 복합재로 확장하여 복합재의 등가열전도계수를 간단히 양함수 형태로 표시한다. 이의 유효성 검증을 위해 이 결과를 미소등가물모델(DEMM)로 구한 결과와 비교하고, 또 참고문헌의 2상 및 3상 복합재의 실험결과와 비교한다. 2상 복합재의 경우 MEM이 충전재의 체적비 0.5 미만에서는 DEMM보다 잘 예측한다. 3상 복합재의 경우 모재 대비 큰 열전도계수비를 갖는 충전재의 체적비가 적은 경우 MEM이 잘 예측하나, 체적비가 증가할수록 DEMM이 잘 예측한다. 이 체적비가 두 모델의 예측결과에 결정적 영향을 주는 인자임이 변수들의 영향 연구를 통해 밝혀졌으며, Molina 등이 제안한 3상 복합재에 대해 MEM과 DEMM은 동등한 예측 수준을 보였다.