• Proceedings of the KWS Conference
• /
• 2010.05a
• /
• pp.43-46
• /
• 2010

As the nuclear power plant has been constructed continuously for several decades in Korea, the welding technology for components manufacturing and installation has been improved largely. Standardization for weld test and qualification was also established systematically according to the concerned code. The welding for the main components requires the high reliability to keep the constant quality level, which means the repeatability of weld quality. Therefore the weld process qualified by thorough test and evaluation is able to be applied for manufacturing. Narrow gap SAW and GTAW process are usually applied for girth seam welding of pressure vessel like Reactor vessel, steam generator, and etc. For the surface cladding with stainless steel and Inconel material, strip welding process is mainly used. Inside cladding of nozzles is additionally applied with Hot wire GTAW and semi-auto welding process. Especially the weld joint having elliptical weld line on curved surface needs a specialized weld system which is automatically rotating with adjusting position of the head torch. The small sized pipe, tube, and internal parts of reactor vessel requests precise weld processes like an automatic GTAW and electron beam welding. Welding of dissimilar materials including Inconel690 material has high possibility of weld defects like a lack of fusion, various types of crack. To avoid these kinds of problem, optimum weld parameters and sequence should be set up through the many tests. As the life extension of nuclear power plant is general trend, weld technologies having higher reliability is required gradually. More development of specialized welding systems, weld part analysis and evaluation, and life prediction for main components should be taken into a consideration extensively.

• Journal of Navigation and Port Research
• /
• v.30 no.6 s.112
• /
• pp.465-470
• /
• 2006

Nowadays, vessel's size is tending to bigger, Therefore port facilities are developed according to this trend, which has been shown in the competition of Hub-Port among the main ports such as Port of Busan and Port of Shanghai. However there are the limited number of large containerships more specifically so 70% of the total ships calling at Busan Port are small and medium sized ships which are less than 20,000 ton As a result, it is necessary to consider the handling facilities of these ships which had been disregarded The big size of facilities increases handling cost bemuse of high investment so it is possible for small and medium sized ships to have disadvantages financially and avoid calling. In this paper, we estimate the propriety of utilization of crane and labor according to the size of vessels after analyzing time value cost, reflecting the size of vessels, size and number of crane and labor structure, and container handling cost value.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.6
• /
• pp.798-807
• /
• 2021

In the era of the fourth industrial revolution, Maritime Autonomous Surface Ship(MASS) are expected to emerge in the shipping industry. There has been much active research on collision avoidance systems regarding MASSs, but most of it has focused on merchant ships. A study of collision avoidance systems in fishing vessels is also essential, because Maritime Autonomous Surface Ships will encounter all type of vessels. In this study, the minimum passage distance between small-medium-sized fishing vessels and other vessels was investigated for the Ship's domain analysis. Based on the AIS data of Busan port and the adjacent area, the separation distances of fishing vessels were analyzed. The results indicated that as the speed of fishing vessels increased, the distance increased from 4L to 8L, and as length of the fishing vessels increased, the distance decreased from 10L to 6L. It is believed that the results of this study can be applied in the future to collision avoidance models for MASSs that reflect the domain of fishing vessels.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.5
• /
• pp.447-452
• /
• 2016

The use of gas as fuel, particularly liquefied natural gas (LNG), has increased in recent years owing to its lower sulfur and particulate emissions compared to fuel oil or marine diesel oil. LNG is a low temperature, volatile fuel with very low flash point. The major challenges of using LNG are related to fuel bunkering, storing, and handling during ship operation. The main components of an LNG fuel system are the bunkering equipment, fuel tanks, vaporizers/heaters, pressure build-up units (PBUs), and gas controlling units. Low-pressure dual-fuel (DF) engines are predominant in small LNG-powered vessels and have been operating in many small- and medium-sized ferries or LNG-fueled generators.(Tamura, K., 2010; Esoy, V., 2011[1][2]) Small ships sailing at coast or offshore rarely have continuous operation at constant engine load in contrast to large ships sailing in the ocean. This is because ship operators need to change the engine load frequently due to various obstacles and narrow channels. Therefore, controlling the overall system performance of a gas supply system during transient operations and decision of bunkering time under a very poor infrastructure condition is crucial. In this study, we analyzed the fuel consumption, the system stability, and the dynamic characteristics in supplying fuel gas for operating conditions with frequent engine load changes using a commercial analysis program. For the model ship, we selected the 'Econuri', Asia's first LNG-powered vessel, which is now in operation at Incheon Port of South Korea.

• Journal of Yeungnam Medical Science
• /
• v.21 no.1
• /
• pp.101-107
• /
• 2004

Diffuse alveolar hemorrhage is a rare but serious and frequently life-threatening complication of a variety of conditions. The first goal in the management of patients with diffuse alveolar hemorrhage is to achieve or preserve stability of the respiratory status. Subsequently, the differential diagnosis is aimed at the identification of a remediable cause of the alveolar hemorrhage. The most common causes of diffuse alveolar hemorrhage with glomerulonephritis are microscopic polyangiitis and Wegener's granulomatosis, followed by Goodpasture syndrome and systemic lupus erythematosus. Microscopic polyangiitis (MPA) is a distinct systemic small vessle vasculitis affecting small sized vessels with few or no immune deposits and with no granulomatosus inflammation. The disease may involve multiple organs such as kidney, lung, skin, joint, muscle, gastrointestinal tract, eye, and nervous system. MPA is strongly associated with antineutrophil cytoplasmic autoantibody (ANCA) that is a useful serological diagnostic marker for the most common form of necrotizing vasculitis. Our report concerns a case of microscopic polyangiitis with diffuse alveolar hemorrhage in a 54-year-old man. He was admitted to our hospital due to dyspnea upon exertion and recurrent hemoptysis. Laboratory findings showed hematuria, proteinuria and deterioration of renal function. In the chest CT scan, diffuse ground glass appearance was seen in both lower lungs. A lung biopsy revealed small vessel vasculitis with intraalveolar hemorrhage and showed a positive reaction to against perinuclear ANCA. The patient was treated with prednisolone and cyclophosphamide. Chest infiltration decreased and hemoptysis and hypoxia improved. He is still being followed up in our hospital with a low dose of prednisolone.

• Archives of Reconstructive Microsurgery
• /
• v.22 no.1
• /
• pp.18-23
• /
• 2013

Purpose: For reconstruction of lower extremity defects, various flaps can be used and the appropriate flap must be selected and applied according to the size of the defect. In particular, in cases where the defect size is small to moderate, thinner or smaller volume flaps are useful. The authors performed reconstruction of small to moderate defects on the lower extremities using superficial circumflex iliac artery perforator free flaps and are reporting the results. Materials and Methods: Fifteen patients underwent reconstruction of defects on lower extremity areas using superficial circumflex iliac artery perforator free flaps from July 2011 to July 2012 at this hospital. The flaps were elevated from above the deep fat layer, and, in all cases, the vessel diameter of the flaps was less than 1mm, with the exception of superficial vein that accompanied it. Results: The mean follow up period was 4.46 months, and, despite a partial loss in the flap in two cases, there were no total losses. All donor sites were closed with primary closure, and there was no occurrence of complications, such as hematomas, seromas, or lymphorrheas. The patients were highly satisfied with the donor site scar since it could be masked by underwear. Conclusion: Compared to other flaps, superficial circumflex iliac artery perforator free flaps are thinner in thickness and smaller in volume, which results in a more natural contour of the recipient site after the operation. In addition, since the flap can be elevated from supra-deep fat layer, the operation time can be shortened, and lymphorrhea can be prevented, which in turn lessens donor-site morbidity.

• Archives of Plastic Surgery
• /
• v.32 no.2
• /
• pp.199-204
• /
• 2005

The nose is the most prominent area of the face, therefore susceptible to trauma and skin cancer. When small sized defect is in nasal tip, it results in disturbance of the facial harmony even if replantation, composite graft, skin graft or median forehead flap has been used for the reconstruction. So it is needed that the best method reconstruction is performed according to the degree of defect or deformity. And at the same time the physiology and anatomy of nose were clarified and its aesthetic subunits were employed. How can we cover the about 3 cm sized nasal defect in nasal tip with cartilage exposure? At first, we can think forehead island flap is most appropriate. We performed 7 cases of the forehead island flap for reconstruction of the defect in nasal tip(4 cases: cancer, 3 cases: trauma) from March, 2001 to August, 2004. This result was satisfactory in the point of texture, color, donor scar, and there were no complication such as wound disruption, infection, flap atrophy, and hematoma. The advantages of forehead island flap are: 1) No injury of deep vessel and nerve, 2) control of shape and volume, 3) Short operation time, 4) primary closure of donor site, 5) one stage operation. Also, forehead island flap can cover the defect in nose where skin graft and local flap can not cover. But, operator always must take care for flap congestion and donor site scar. We thought forehead island flap is one of the best option of reconstruction of nasal tip defect.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.12
• /
• pp.208-213
• /
• 2010

This paper deal with an analysis of the ground surface potential profiles using a hemispherical scaled-model. Because it is very difficult to draw valid conclusions concerning a general grounding problem from actual field data, scale model tests can be used to determine the ground surface potential profile around the grounding electrodes according to the configuration of grounding electrodes. In this work, a hemispherical vessel with a diameter of 1,100 [mm] was employed to simulate uniform soil and CDEGS program was employed to compare the measured and simulated results. As a result, the ground surface potential around the grounding electrode was significantly raised and the ground surface potential at the just upper point of ground electrode particularly was higher than other points. The ground surface potential of counterpoise was higher than other grounding electrodes such as mesh and grounding rods and the ground surface potential strongly depends on the frequency responses of grounding electrodes. Also the results measured with the small-sized model were in reasonably agreement with the data obtained from simulation.

• Korean Journal of Artificial Intelligence
• /
• v.4 no.1
• /
• pp.4-7
• /
• 2016

These days, citizens have made change of food life to take Western style food and to suffer from diabetes because of excessive nutrition taking, less exercise, stress and other environmental factors. They may suffer from diabetes because of genetic defect, surgery of pancreas, disinfection and medicine and others. One of ten Koreans may have symptom of diabetes to be popular. The diabetes that is a kind of metabolic disease has high blood sugar at disorder of hyper insulinism and/or defect of insulin action. Long time high blood sugar may produce chronic disease of kidney, eyes, nerve, heart and blood vessel and others. The purpose of health care of diabetes patient was to reach target blood sugar by diet, physical exercise and medicine and to prevent and delay complication. Diabetes patient shall control blood sugar to keep healthy. The blood sugar control requires time and effort, and all of the patients are difficult to make effort and to spend time. You can control blood sugar by the application. The application allows patients to control blood sugar and to save time and efforts and to make small sized input and automation of remaining area. The service was limited to blood sugar graph, and user carries smart phone to conduct test and to have difficulty. Further study needs to solve the problems and to investigate blood sugar testing not carrying smart phone and to make application of easy control of blood sugar.

• Korean Journal of Artificial Intelligence
• /
• v.3 no.1
• /
• pp.4-6
• /
• 2015

These days, citizens have made change of food life to take Western style food and to suffer from diabetes because of excessive nutrition taking, less exercise, stress and other environmental factors. They may suffer from diabetes because of genetic defect, surgery of pancreas, disinfection and medicine and others. One of ten Koreans may have symptom of diabetes to be popular. The diabetes that is a kind of metabolic disease has high blood sugar at disorder of hyper insulinism and/or defect of insulin action. Long time high blood sugar may produce chronic disease of kidney, eyes, nerve, heart and blood vessel and others. The purpose of health care of diabetes patient was to reach target blood sugar by diet, physical exercise and medicine and to prevent and delay complication. Diabetes patient shall control blood sugar to keep healthy. The blood sugar control requires time and effort, and all of the patients are difficult to make effort and to spend time. You can control blood sugar by the application. The application allows patients to control blood sugar and to save time and efforts and to make small sized input and automation of remaining area. The service was limited to blood sugar graph, and user carries smart phone to conduct test and to have difficulty. Further study needs to solve the problems and to investigate blood sugar testing not carrying smart phone and to make application of easy control of blood sugar.