• Journal of Korean Society on Water Environment
• /
• v.33 no.5
• /
• pp.511-524
• /
• 2017

This study was carried out for the purpose of creating a restoration plan to improve the ecological quality of the Changwon and Nam streams. Based upon the results of comprehensive diagnostic assessment, restoration priority was given to the upstream reach, where conservation status is relatively superior. Restoration level was usually determined to practice active restoration as conservation, and the states of both Changwon and Nam streams were not so good. Restoration plans, by reach, were classified into "upstream", "midstream", and "downstream" were suggested in both terms of horizontal section frame and vegetation-based on the result of diagnostic assessment and the reference information. "Upstream", "mid-stream" and the "downstream" of Changwon and Nam streams were classified into "small-gravel- mountainous", "small-sand-plain", and "small-clay-plain streams" respectively (based on scale, and substrate and slope of river bed). The spatial arrangement of vegetation was laid out in diagram form by reflecting micro-topography and the water level of the horizontal section of river. Information regarding species composition was recommended as dominant species, which appear frequently in three vegetation zones composed of herbaceous plants, shrubs and trees and sub-tree- dominated zones divided by reflecting disturbance regime, depending on position on the horizontal section of river. Moreover, there have been prepared not only plans to improve the terrestrial ecosystems around the streams but also plans to create ecological networks, which can serve to improve the ecologic quality of the whole regional environment by serving to connect streams and terrestrial ecosystems, a process probably necessary and definitely recommended to realize true (genuine) restoration. Plans for ecological parks and networks were prepared by mimicking the species composition of Alnus japanica community, Zelkova serrata community, Carpinus laxiflora community, Quercus aliena community, and Q. serrata community.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.2
• /
• pp.189-197
• /
• 2006

Twenty small-scale farms of two villages (A and B) were surveyed to identify the feeding traits, milk productivity and nutritional status of lactating cattle and buffalo in Terai, Nepal. Constituents and dry matter (DM) of feed supplied, body condition score (BCS), heart girth (HG), bodyweight (BW), milk yield (MY) and plasma metabolites were obtained in the pasture-sufficient, pasture-decreasing and fodder-shortage periods. Milk yield of 305-day lactation was estimated by the daily MY. The supplies of rice straw and native grass were lower and higher in the pasture-sufficient period than in the other periods, respectively (5.5 kg/day vs. 9.8 kg/day and 3.2 kg/day vs. 0.4 kg/day, respectively, p<0.01). The roughage-supplement rates of the animals were higher in village A than in village B (5.0 vs. 2.2 in cattle and 9.3 vs. 1.8 in buffalo, p<0.01). The variance of feed constituents among the periods and between the villages induced different supplies of CP, NDF and TDN. The concentrations of CP and TDN in the cattle feed were higher in the pasture-sufficient period than in the other periods (9.1% vs. 7.3% and 57.4% vs. 51.0%, respectively, p<0.01). The supplies of CP for cattle and buffalo, and of TDN for buffalo were lower in village A than in village B (7.5% vs. 8.7% and 6.6% vs. 9.1% [p<0.01], and 53.1% vs. 56.2% [p<0.05], respectively). The BCS, HG and BW of the animals were lower in village A than in village B (2.51 vs. 2.86, 156 cm vs. 170 cm and 300 kg vs. 318 kg, respectively in cattle, 2.83 vs. 4.00, 186 cm vs. 216 cm and 429 kg vs. 531 kg, respectively in buffalo, p<0.01). The cattle yielded more milk in the pasture-sufficient period than in the other periods (7.9 liters/day vs. 6.6 liters/day, p<0.01). The 305-day MY of cattle that calved in the fodder-shortage period was lower than that of cattle that calved in the other periods (1,900 liters vs. 2,251 liters, p<0.01). The MYs of cattle and buffalo were lower in village A than in village B (6.2 liters/day vs. 8.1 liters/day and 3.7 liters/day vs. 7.7 liters/day, respectively, p<0.01). The 305-day MY of cattle was lower in village A than in village B (1,935 liters vs. 2,409 liters, p<0.01). The concentrations of plasma albumin and urea nitrogen in cattle were lower in village A than in village B (3.2 g/dl vs. 3.4 g/dl [p<0.01] and 7.4 mg/dl vs. 10.2 mg/dl [p<0.05], respectively). The different supplies of CP, NDF and TDN among the periods and between the villages might have affected MY and nutritional status in cattle and buffalo. It was likely that the lower supplies of CP and TDN for cattle that calved in the fodder-shortage period and in village A lowered the 305-day MY of cattle.

• Journal of Korean Medicine Rehabilitation
• /
• v.31 no.2
• /
• pp.41-48
• /
• 2021

Objectives To determine the evidence of effectiveness and safety of extracorporeal shock wave therapy (ESWT) with meridian and acupoint theory for knee osteoarthritis. Methods By March 3, 2021, five foreign electronic databases and six Korean medical electronic databases were reviewed with the key words 'extracorporeal shock wave' and '(acupoint OR acupuncture point)'. This key words was set up to increase the sensitivity of the search. After the search, knee osteoarthritis study was selected based on the title and abstract and then included after full-texts were read. Results Five randomized controlled trials were eligible in our inclusion criteria. The meta-analysis of three studies showed positive results for the using ESWT with meridian and acupoint theory for knee osteoarthritis compared with the control group on efficancy rate, visual analog scale and lysholm knee score. but there remains a conundrum regarding the safety of ESWT in the treatment of knee osteoarthritis. Conclusions Most of studies showed ESWT with meridian and acupoint theory were statistically effective to knee osteoarthritis. However there are limitations that the number of selected studies was small, risk of bias was unclear. So use of ESWT with meridian and acupoint theory for knee arthritis has limited evidence compared to usual care.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.21 no.5
• /
• pp.379-396
• /
• 2021

Background: Trigeminal neuralgia (TN) is characterized by brief, unilateral, sharp, stabbing, and shooting pain of the fifth cranial nerve. The objective of this systematic review with meta-analysis was to determine the effect of medications compared to placebo in adult patients with TN. Methods: Review authors identified randomized placebo-controlled trials (RCTs) from PubMed, Web of Science, Cochrane, and EMBASE up to February 2021. We assessed the inclusion and exclusion criteria as well as the risk of bias of the studies based on the Cochrane Handbook. A total of 324 unduplicated references were scanned independently and reduced to eight relevant RCTs, with 89 patients included. Medications investigated included oral carbamazepine, subcutaneous sumatriptan, lidocaine (intranasal, 8% spray on the oral mucosa or intravenous), buprenorphine (ganglionic local opioid analgesia), and oral Nav1.7, a selective sodium channel blocker. Results: Meta-analyses showed that overall patients receiving lidocaine reported a significantly lower post-treatment intensity of pain -3.8 points on a 0-10 scale (95% Cl = -4.653 to -2.873; P < 0.001). Patients who received lidocaine were 8.62 times more likely to have pain improvement than patients on placebo (P < 0.001). In one RCT, patients receiving oral carbamazepine showed a significant improvement in pain intensity of -32% compared to the placebo (P < 0.001). In one trial, patients receiving 3 mg subcutaneous sumatriptan had a significantly lower intensity of pain on average -6.1 points on a scale of 0-10 compared to placebo (P < 0.001) and a significant improvement in pain intensity of -75% compared to the improvement in the placebo group (P < 0.001). Patients who received subcutaneous sumatriptan were 10 times more likely to have pain improvement than those who received placebo (P = 0.001) in one study. Due to the unclear/high risk of bias and small sample size, the quality of the evidence for lidocaine in the treatment of TN was low. Conclusion: Further studies are needed for carbamazepine, sumatriptan, buprenorphine, and oral Nav1.7 sodium channel blockers, as only one study reported outcomes.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.34 no.3
• /
• pp.283-290
• /
• 2016

Even though existing methods for orthophoto production in traditional photogrammetry are effective in large areas, they are inefficient when dealing with change detection of geometric features and image production for short time periods in small areas. In recent years, the UAV (Unmanned Aerial Vehicle), equipped with various sensors, is rapidly developing and has been implemented in various ways throughout the geospatial information field. The data and imagery of specific areas can be quickly acquired by UAVs at low costs and with frequent updates. Furthermore, the redundancy of geospatial information data can be minimized in the UAV-based orthophoto generation. In this paper, the orthophoto and DEM (Digital Elevation Model) are generated using a standard low-end UAV in small sloped areas which have a rather low accuracy compared to flat areas. The RMSE of the check points is σ_H = ±0.12 m on a horizontal plane and σ_V = ±0.09 m on a vertical plane. As a result, the maximum and mean RMSE are in accordance with the working rule agreement for the airborne laser scanning surveying of the NGII (National Geographic Information Institute) on a 1/500 scale digital map. Through this study, we verify the possibilities of the orthophoto generation in small slope areas using general-purpose low specification UAV rather than a high cost surveying UAV.

• Journal of Sensor Science and Technology
• /
• v.24 no.4
• /
• pp.228-231
• /
• 2015

Ultrasonic motors provide high torques and quick responses compared to their magnetic counterparts; therefore, they are widely used in small-scale applications such as mobile phones, microrobots, and auto-focusing modules in digital cameras. To determine the feasibility of lead-free piezoceramics for ultrasonic motor applications, we fabricated a ring-type piezoceramic with a KNN-based lead-free piezoceramic (referred to as CZ5), intended for use in an auto-focusing module of a digital camera. The vibration of the lead-free stator was observed at 45.1 kHz. It is noteworthy that the fully assembled lead-free ultrasonic motor exhibited a revolution speed of 5-7 rpm, even though impedance matching with neighboring components was not considered. This result suggests that the tested KNN-based piezoceramic has great potential for use in ultrasonic motor applications, requiring minimal modifications to existing lead-based systems.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.24 no.9
• /
• pp.657-662
• /
• 2012

The cogeneration system can operate at efficiencies greater than those achieved when heat and power are produced in separate. The optimal system can be determined by selecting the auxiliary system combined with cogeneration system. In the present study, economic investigation has been conducted with the cogeneration electric heat pump(EHP) system and the cogeneration absorption chiller(AC) system to install in a school dormitory. To analyze life cycle cost(LCC), cost items such as initial investment costs, annual energy costs and maintenance costs of each system have been considered. The initial investment cost is referred to the basis of estimated costs, and annual energy costs such as the electric power and gas consumption are based on the data in a school dormitory. LCC is evaluated with the present worth method. Considering investigated results, the initial investment cost of the cogeneration EHP system is more profitable about 24% than that of the cogeneration AC system. The energy cost of the cogeneration EHP system is more profitable about 8% than the cogeneration AC system. The LCC shows that the cogeneration EHP system is the most effective system in the school dormitory.

• Steel and Composite Structures
• /
• v.29 no.3
• /
• pp.349-362
• /
• 2018

Thermal buckling behavior of porous functionally graded nanobeam integrated with piezoelectric sensor and actuator based on the nonlocal higher-order shear deformation beam theory is investigated for the first time. Its material properties are assumed to be temperature-dependent and varying along the thickness direction according to the modified power-law rule. Note that the porosity with even type is considered herein. The equations of motion are obtained through Hamilton's principle. The influences of several parameters (such as type of temperature distribution, external electric voltage, material composition, porosity, small-scale effect, Ker foundation parameters, and beam thickness) on the thermal buckling of FG nanobeam are investigated in detail.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.11
• /
• pp.1925-1930
• /
• 2016

Fuel cell power generation system, unlike conventional energy sources, converts chemical energy into electrical energy through electrochemical reaction of hydrogen and oxygen. This paper presents the control of interleaved multi-phase boost converter as the feasibility study on small-scale prototype electric railway vehicle application using fuel cell generation system. PSIM simulation program is to be used to implement the modeling of the electrical fuelcell as well as traction motor control with interleaved multi-phase boost converter. Comparing the input current ripple rate, two-phase interleaved boost converter is less than the boost converter. But the more multi-phase not less proportional to the ripple factor. we confirmed that the amplitude of the input current ripple rate of converter depend on duty ratio.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.2
• /
• pp.56-62
• /
• 2017

In this research, reverse engineering was applied to the product manufactured by "Vanzetti" from Italy to develop a localized cryogenic submerged pump used in small-scale LNG liquefaction plants. The results of modal analysis of the impeller and shaft confirmed that the resonance frequency of the impeller and shaft played an important role in the rotor. Modal analysis of the rotor confirmed that the forcing frequency had no influence on the resonance phenomenon.