• Korean Journal of Poultry Science
• /
• v.32 no.3
• /
• pp.179-186
• /
• 2005

This study was conducted to establish a comprehensive guideline for grading system of poultry meat cuts. Slaughter and further processed houses were divided into large(>70,000 heads/day), middle($50,000\~25,000$ heads/day), and small scale(<25,000 heads/day), and the production managers were asked by the Questionnaire. Most poultry meat cuts produced by larger- and middle-slaughter house were consumed by dealers, franchisee and department store in increasing order, whereas further processed poultry meat cuts(small scale) provided meals for the students in the high amount. The packaging step was best f3r the determination of grading in the large slaughter house. This survey indicated that two or more grades were proper to determine the grading in the middle slaughter house, however only two grades were proper for the others. Freshness, bruise, wound, trimming and the inclusion of foreign materials affected to the grading. Poultry meat cuts were accepted for the grading in large-slaughter house, but whole poultry carcass was accepted for the grading in the others. Most managers agreed with that the grading system was only applied for the amounts requested. They also suggested that the grading system of poultry meat cuts were necessary in near future, even though it was not urgent to apply.

• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.7
• /
• pp.1050-1056
• /
• 2014

This study investigated the main factors influencing digester temperature and methods to reduce heat losses during the cold season in the subtropics. Four composite digesters (two insulated and two uninsulated) were buried underground to measure their internal temperature ($^{\circ}C$) at a depth of 140 cm and 180 cm, biogas production and methane ($CH_4$) concentration in biogas from August to February. In parallel the temperature of the air (100 cm above ground), in the slurry mixing tank and in the soil (10, 100, 140, and 180 cm depth) was measured by thermocouple. The influent amount was measured daily and the influent chemical composition was measured monthly during the whole experimental period. Seasonal variations in air temperature significantly affected the temperature in the soil, mixing tank and digester. Consequently, biogas production, which is temperature dependent, was influenced by the season. The main factors determining the internal temperature in the digesters were insulation with Styrofoam, air temperature and temperature of slurry in the mixing tank. Biogas production is low due to the cold climate conditions in winter in Northern Vietnam, but the study proved that storing slurry in the mixing tank until its temperature peak at around 14:00 h will increase the temperature in the digester and thus increase potential biogas production. Algorithms are provided linking digester temperature to the temperature of slurry in the mixing tank.

• Publications of The Korean Astronomical Society
• /
• v.27 no.4
• /
• pp.219-220
• /
• 2012

We present the results of far-infrared spectroscopic observations of the Large Magellanic Cloud (LMC) with FIS-FTS. We covered a large area across the LMC, including 30 Doradus (30 Dor) and N44 star-forming regions, by 191 pointings in total. As a result, we detect the [OIII] and [CII] line emission as well as far-infrared dust continuum emission throughout the LMC. We find that the [OIII] emission is widely distributed around 30 Dor. The observed size of the distribution is too large to be explained by massive stars in 30 Dor, which are assumed to be enshrouded by clouds with the constant gas density estimated from the [OIII] line intensities. Therefore the surrounding structure is likely to be highly clumpy. We also find a global correlation between the [OIII] and the far-infrared continuum emission, suggesting that the gas and dust are well mixed in the highly-ionized region where the dust survives in clumpy dense clouds shielded from energetic photons. Furthermore we find that the ratios of [CII]/CO are as high as 110,000 in 30 Dor, and 45,000 even on average, while they are typically 6,000 for star-forming regions in our Galaxy. The unusually high [CII]/CO is also consistent with the picture of clumpy small dense clouds.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.389-390
• /
• 2012

In this study, we fabricate a superhydrophobic surface made of hierarchical nanostructures that combine wax crystalline structure with moth-eye structure using vacuum cluster system and measure their hydrophobicity and durability. Since the lotus effect was found, much work has been done on studying self-cleaning surface for decades. The surface of lotus leaf consists of multi-level layers of micro scale papillose epidermal cells and epicuticular wax crystalloids [1]. This hierarchical structure has superhydrophobic property because the sufficiently rough surface allows air pockets to form easily below the liquid, the so-called Cassie state, so that the relatively small area of water/solid interface makes the energetic cost associated with corresponding water/air interfaces smaller than the energy gained [2]. Various nanostructures have been reported for fabricating the self-cleaning surface but in general, they have the problem of low durability. More than two nanostructures on a surface can be integrated together to increase hydrophobicity and durability of the surface as in the lotus leaf [3,5]. As one of the bio-inspired nanostructures, we introduce a hierarchical nanostructure fabricated with a high vacuum cluster system. A hierarchical nanostructure is a combination of moth-eye structure with an average pitch of 300 nm and height of 700 nm, and the wax crystalline structure with an average width and height of 200 nm. The moth-eye structure is fabricated with deep reactive ion etching (DRIE) process. $SiO_2$ layer is initially deposited on a glass substrate using PECVD in the cluster system. Then, Au seed layer is deposited for a few second using DC sputtering process to provide stochastic mask for etching the underlying $SiO_2$ layer with ICP-RIE so that moth-eye structure can be fabricated. Additionally, n-hexatriacontane paraffin wax ($C_{36}H_{74}$) is deposited on the moth-eye structure in a thermal evaporator and self-recrystallized at $40^{\circ}C$ for 4h [4]. All of steps are conducted utilizing vacuum cluster system to minimize the contamination. The water contact angles are measured by tensiometer. The morphology of the surface is characterized using SEM and AFM and the reflectance is measured by spectrophotometer.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.28 no.2
• /
• pp.149-154
• /
• 2017

Objectives: The purpose of this study is to analyze the co-author networks in the Journal of the Korean Academy of Child and Adolescent Psychiatry, a representative journal published by a branch of the domestic psychiatric academy, in order to present the current state of the co-authoring of and developments in child and adolescent psychiatry. Methods: We visualized and estimated the basic characteristics of the co-author networks shown by 564 authors who wrote 251 papers published in the Journal of the Korean Academy of Child and Adolescent Psychiatry between 2005 and 2015, in order to assess their network characteristics, author centrality, and relevance to research performance. Results: The co-author networks in the Journal of the Korean Academy of Child and Adolescent Psychiatry showed the characteristics of a small world and scale-free network. There was a correlation between the author centrality within the network and the research performance of the authors, but less correlation was shown between the centrality and mean paper citation counts. Conclusion: The network structure in the Journal of the Korean Academy of Child and Adolescent Psychiatry showed similarity to the co-authoring of other branches. However, given that the mean paper citation counts were less correlated with the author centrality than those in other branches, it may be necessary to promote an increase in the mean paper citation counts.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.16 no.4
• /
• pp.289-294
• /
• 2016

Background: Control of postoperative pain is an important aspect of postoperative patient management. Among the methods of postoperative pain control, patient-controlled analgesia (PCA) has been the most commonly used. This study tested the convenience and safety of a PCA method in which the dose adjusted according to time. Methods: This study included 100 patients who had previously undergone orthognathic surgery, discectomy, or total hip arthroplasty, and wished to control their postoperative pain through PCA. In the test group (n = 50), the rate of infusion was changed over time, while in the control group (n = 50), drugs were administered at a fixed rate. Patients' pain scores on the visual analogue scale, number of rescue analgesic infusions, side effects, and patients' satisfaction with analgesia were compared between the two groups. Results: The patients and controls were matched for age, gender, height, weight, and body mass index. No significant difference in the mount of drug administered was found between the test and control groups at 0-24 h after the operation; however, a significant difference was observed at 24-48 h after the operation between the two groups. No difference was found in the postoperative pain score, number of side effects, and patient satisfaction between the two groups. Conclusions: Patient-controlled anesthesia administered at changing rates of infusion has similar numbers of side effects as infusion performed at a fixed rate; however, the former allows for efficient and safe management of postoperative pain even in small doses.

• Journal of environmental and Sanitary engineering
• /
• v.11 no.1
• /
• pp.45-55
• /
• 1996

An experimental research was conducted in order to study the combined treatment o of municipal landfill leachate and municipal sewage. The landfill leachate was that of Nanjido landfill site, and the municipal sewage was that of Chungnang municipal sewage treatment plant in Seoul. Several sets of bench~scale sequencing batch reactor(SBR) were used as e experimental apparatus. Specially investigated items in this experiment were the removal efficiency of substrate and the influence of treatment time. The experiment lasted for about 2 years. The result are as follows ; 1. The characteristics of leachate were pH 7.5~8.2, BOD 80~336mg/L, COD 908~1,460mg/L, NH3-N 1,409~2,330mg/L, T~P 2.7~7.lmg/L, Cl~3,540~4,085mg/L, a and heavy metals are a very small amount. And the characteristics of sewage were pH 6.9~7.3, BOD 78.4~129.3mg/L, COD 121.2~305.0mg/L, T~N 14.9~36.4mg/L, T-P 2.3~8.9mg/L. 2. The treatability of leachate alone was not treat well. So for the good treatment of leachate, it was necessary to deal with the pretreatment before bi이ogical treatment and a combined treatment of municipal sewage. 3. The various contents of the leachate were 5%, 10%, 30%, and 50%, and the removal efficiency of COD was 86.0%, 82.8%, 60.6%, and 31.7%. The maximum content of the leachate which could be sucessfully treated by SBR in the combined treatment was 10% of that of sewage. And the removal efficiency of COD increased n notably, as its treatment time increased. 4. The various contents of the electrolytic treated leachate were 5%, 10%, 30%, and 50%, and the removal efficiency of COD was 89.9%, 86.1%, 79.2%, and 69.8%. The maximum content of the leachate which could be sucessfully treated by SBR in the combined treatment was 30 % of that of sewage. And the removal efficiency of C COD increased notably, as its treatment time increased.

• Journal of Korean Society of Water and Wastewater
• /
• v.22 no.1
• /
• pp.31-38
• /
• 2008

The primary objective of this study was to evaluate the variation of the molecular size distribution by granular activated carbon (GAC) adsorption. GAC adsorption was assessed by using the rapid small-scale column test (RSSCT) and high-performance size-exclusion chromatography (HPSEC) was used to analyze the molecular size distribution (MSD) in the effluent of GAC column. RSSCT study suggested that GAC adsorption exhibited excellent interrelationship between dissolved organic carbon (DOC) breakthrough and MSD as function of bed volumes passed. After GAC treatment, the nonadsorbable fraction which was about 25percents of influent DOC corresponded to the hydrophilic (HPI) natural organic carbon (NOM) of NOM fractions and was composed entirely of <300 molecular weight (MW) in the HPSEC at the initial stage of the RSSCT operation. The dominant MW fraction in the source water was 1,000~5,000daltons. At the bed volumes 2,500, MW <500 of GAC treated water was risen rather than it of source water. After the bed volumes 7,300 of operation, the MW 1,000~3,000 fraction was closed to about 80percents of DOC found in the GAC influent. The Number-average molecular weight (Mn) value determined using HPSEC for the effluent of GAC column was gently increased as DOC breakthrough progress. The quotient p(Mw/Mn) can be used to estimate the degree of polydispersity was shown greatest value for the GAC effluent at the initial stage of the RSSCT operation.

• Journal of computational fluids engineering
• /
• v.17 no.4
• /
• pp.81-86
• /
• 2012

The objective of the present study is to investigate the effects of various turbulence models on the aerodynamic noise of an air-conditioner (AC) indoor unit. The results from URANS (unsteady Reynolds-averaged Navier-Stokes) simulations with the standard k-$\varepsilon$, k-$\omega$ shear stress transport (SST) and Spalart-Allmaras (S-A) turbulence models were analyzed and compared with the noise data from the experiments. The frequency spectra of the far-field acoustic pressure were computed using the Farrasat equation derived from the Ffowcs Williams-Hawkings (FW-H) equation based on the acoustic analogy model. Two fixed fan casings and the rotating cross-flow fan were used as the source surfaces of the dipole noise in the Farrasat equation. The result with the standard k-$\epsilon$ model showed a much better agreement with the experimental data compared to the k-w SST and S-A models. The differences in the pressure spectra from the different turbulence models were discussed based on the instantaneous vorticity fields. It was found that the over-estimated power spectra with the k-w SST and S-A models are related to the emphasized small-scale vortices produced with these models.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.31 no.2
• /
• pp.103-106
• /
• 2015

The oriental tobacco budworm, Helicoverpa assulta (Lepidoptera: Noctuidae), is classified as a quarantine pest that must be controlled for the exportation of Korean paprika to the USA. We performed a confirmatory test of gamma irradiation against the last-instar larvae and pupae of H. assulta in paprika. Previous, small-scale gamma irradiation at a dose of 100 Gy to the last-instar larvae allowed emergence of adults, though they were abnormal, but 200 Gy prevented adult emergence completely. For pupae, irradiation of 5- to 6-day-old pupae with 300 Gy prevented normal emergence completely. To gather confirmatory data applicable to phytosanitary quarantine regulations, larvae and pupae were placed inside paprika in a box and were irradiated with 200 Gy and 300 Gy, respectively. After irradiation with 200 Gy (measured doses 170-199 Gy) of 2,186 individuals of the last-instar larvae, 10.84% survived, but either formed abnormal pupae (7.57%) or died during the pupal stage (3.27%), resulting in no emergence of normal adults. For pupae, the dose of 300 Gy (measured doses 276-319 Gy) given to 1,200 pupae allowed 10.75% to survive and 9.17% to emerge with deformity. However, 1.58% of irradiated pupae emerged normally, requiring an increased dose for complete prevention of normal emergence. Subsequently, an increased dose of 400 Gy (measured doses 340-402 Gy) to 1,005 pupae allowed 88.35% to emerge, but all emerged with deformity. Thus, irradiation treatment with a minimum dose of 400 Gy will provide quarantine security for all premature H. assulta in exported paprika.