• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.397-401
• /
• 1994

This paper proposes an identification method for a thin plate where multiple actuators and sensors are bonded. Since a thin plate has small damping ratios of all modes, each mode can be identified seperately with a bandpass filter for each modal signal. With the bandpass filter and the characteristics of the plate, the Multi-Input Multi-Output (MIMO) model of the plate can be converted to several Multi-Input Single-Output(MISO) models of second order linear difference equations of the modes. Parameters for each mode are obtained by using the Least Square method. Form there MISO models, the MIMO model is obtained in the form of the state space. Experiments were performed for an all-clamped plate with two pairs of piezoelectric actuators and sensors. The outputs of the identified model and the experimental data match well.

• 센서학회지
• /
• 제16권6호
• /
• pp.467-474
• /
• 2007

The real-time monitoring about the activity of the human provides useful information about the activity quantity and ability. The present study implemented a small-size and low-power acceleration monitoring system for convenient monitoring of activity quantity and recognition of emergent situations such as falling during daily life. For the wireless transmission of acceleration sensor signal, we developed a wireless transmission system based on a wireless sensor network. In addition, we developed a program for storing and monitoring wirelessly transmitted signals on PC in real-time. The performance of the implemented system was evaluated by assessing the output characteristic of the system according to the change of posture, and parameters and acontext recognition algorithm were developed in order to monitor activity volume during daily life and to recognize emergent situations such as falling. In particular, recognition error in the sudden change of acceleration was minimized by the application of a falling correction algorithm

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2018년도 전력전자학술대회
• /
• pp.99-101
• /
• 2018

This paper present an input-series output-parallel active-clamp-forward converter for low voltage dc/dc xEV application. The converter can achieve ZVS turn-on for all switches. An accurate small signal model of the converter which includes the effect of leakage inductance is given and controller design based on modeling is described. Experimental and simulation results from a 3.2kW, 100kHz prototype are presented in order to verify the validity of the converter operation and the designed control parameters.

• 대한전기학회논문지
• /
• 제43권3호
• /
• pp.372-380
• /
• 1994

A systematic procedure for the elements of system state matrix in multimachine systems with loads and eigenvalue technique which utilize stage matrix have widespread application in the analysis of small signal stability. Synchronous machines are represented by either a two-axis model or classical model. The interrelationship of submatrices of system matrix is investigated. Once elements of one submatrix are determined, they can be used to calculate the elements of the other submatrix. The approach is useful in the eigenvalue sensitivity analysis for various initial conditions and for the adjustment of generator controller parameters. It is illustrated for a three-machine and nine-bus multimachine system(WSCC system) with constant impedance loads.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 A
• /
• pp.119-121
• /
• 2003

In small signal stability analysis of power systems, eigenvalue analysis is the most useful method and the detailed modeling of generator gives an important effect to the eigenvalues. Generator full model is used for precise dynamic analysis of generators and controllers while two-axis model is used for multimachine systems because of the reduced order of the state matrix. Also, the eigenvalue sensitivity coefficients are used for optimization of controller parameters to improve system stability. This paper compare the first order eigenvalue sensitivity coefficients of controllers in case of generator full model with those of two-axis model. As a result of an example the estimated eigenvalues using sensitivity coefficients in case of generator full model is very close to those of state matrix within 1% error ratios.

• 한국통신학회논문지
• /
• 제11권4호
• /
• pp.259-267
• /
• 1986

주파수와 바이어스 조건에 따라 GaAs MESFET의 소신호 S파라미터들을 측정하고, 4단자 회로망 해석에 의한 고정 주파수 마이크로파 발진기의 공진회로와 부하정합회로를 CAD로 최적화 설계하였다. 마이크로스트립 기판을 써서 6GHz의 발진기를 설계 제작하여 최적화한 자료와 실험 결과가 부합됨을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 학술대회 논문집 전문대학교육위원
• /
• pp.12-15
• /
• 2002

This propose a simple DC voltage sensor less single phase PFC(Power Factor Correction Circuit) converter by detecting a AC current sensors are not required to construct the control system. The DC voltage is directly controlled by the command input signal Kd($V_o/V_a$)for the boost chopper circuit. The DC voltage regulation is small because of the feed forward control for the AC line voltage VS and no dependence of the circuit parameters. The sinusoidal current waveform in phase with the AC input voltage can be obtained. These characteristics are confirmed by some experiment results.

• 한국정밀공학회지
• /
• 제17권11호
• /
• pp.75-80
• /
• 2000

Recently, there are a great many research for magnetic levitation system. In case electromagnet is operated as the actuator of control system, first of all, we must analysis about an electromagnet. Important parameters of this system are inductance(L) and resistance(R) which are induced from the coil of electromagnet. And attractive force equation is also important. If the load of this system is large, phase delay is caused by self-inductance effect. Because this delay effect cause stability of whole magnetic evitation system to grow worse, a measures to diminish time constant must have been taken. And the linearized attractive force equation which is used at small range of the operating point is compensated to use at larger range, thus the experiment of magnetic levitation system will get a better result.

• 전자공학회논문지
• /
• 제53권2호
• /
• pp.3-9
• /
• 2016

본 논문에서는 무선 및 이동통신을 위한 클라우드 무선 가입자 네트워크를 지원하는 프론트홀에서 무선 라디오파의 광섬유 전송망의 기술을 제안하고 구현한다. 하향 링크는 OFMD (orthogonal frequency division multiplexing) (O기법을 사용하였고 상향방향의 전송은 SC-FDMA (single carrier-frequency multiple access) 방식으로 구현하였다. 64, QAM, 16QAM, QPSK 등 다양한 변조 방식에 대해 시스템 파라메터를 도출하고 측정치를 기반으로 성능을 분석하였다.

• 센서학회지
• /
• 제11권3호
• /
• pp.171-182
• /
• 2002

이식형 인공중이에 사용되는 일반적인 전자기 방식의 진동 트랜스듀서에 비하여 두 개의 소형 영구자석을 같은 극끼리 접착한 후 코일내부에 위치시킨 차동 전자 트랜스듀서는 효율이 높고 코일-영구자석간의 공극조정이 필요 없으며 외부의 자기장에 대하여 영향을 받지 않는 특성을 가진다. 본 논문에서는 이러한 차동 전자 트랜스듀서를 이식형 인공중이 시스템에 사용하기 위하여 입력전류에 대하여 진동력의 크기를 최대화시킬 수 있는 효율적인 구조를 제안, 해석하였다. 유한요소 해석을 통하여 가장 효율적인 코일과 자석의 길이 비를 도출하였고 소리신호 전달을 위한 트랜스듀서의 필요 진동력을 산출한 후 트랜스듀서 발생 진동력을 해석하였다. 그리고 실제 이소골에 이식할 수 있는 크기의 트랜스듀서를 제작하기 위한 설계상수를 추출하였다. 계산된 설계상수를 이용하여 이식 가능한 크기로 트랜스듀서를 구현한 후 무부하 실험과 사체 부하 실험을 실시하여 제작된 트랜스듀서가 실제 중등이상 고도난청자를 위한 이식형 인공중이 시스템에 사용될 수 있음을 증명하였다.