• Archives of design research
• /
• v.15 no.3
• /
• pp.167-180
• /
• 2002

This study investigates effective ways to help users form a correct mental model of the hierarchical information space (HIS) in small display. The focus is the effect of color cue on understanding the structure and navigating the information space. The concept of color space (CS) corresponds well to the HIS - one color has a unique position in the CS as a piece of information does in HIS. In this study, we empirically examined two types of color cue, namely, categorical and depth cue. Hue was used as a categorical cue and tone was used as a depth cue. In our experiment, we evaluate the effectiveness of the color cues in the mobile internet system. Subjects were asked to perform four searching tasks and four comparison tasks. The results of experiment reveal that the categorical cues significantly improve the user's mental model whereas decrease navigation performances. The depth cues cannot aid in understanding the HIS as well as improve navigation performances. This study concludes with limitations of the study and descriptions of future studies.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.12
• /
• pp.2633-2640
• /
• 2009

We design a small-area, low-power, and high-speed EEPROM for touch screen controller IC. As a small-area EEPROM design, a SSTC (side-wall selective transistor) cell is proposed, and high-voltage switching circuits repeated in the EEPROM core circuit are optimized. A digital data-bus sensing amplifier circuit is proposed as a low-power technology. For high speed, the distributed data-bus scheme is applied, and the driving voltage for both the EEPROM cell and the high-voltage switching circuits uses VDDP (=3.3V) which is higher than the logic voltage, VDD (=1.8V), using a dual power supply. The layout size of the designed 128-KBit EEPROMIP is $662.31{\mu}m{\times}1314.89{\mu}m$.

• Korean Management Science Review
• /
• v.23 no.3
• /
• pp.27-39
• /
• 2006

Designing mobile Interfaces is fundamentally different from designing online interfaces. Not only are there differences in underlying technologies, but also in the way people use mobile Interfaces. If these differences are not taken into account in designing mobile interfaces, mobile services are likely to fail. If mobile services do not deliver what people want, these services will fail no matter how excellent the underlying technology is. The user interface design commonly used in mobile services is based on multi-layered approach, which is not very user-friendly. A well designed single layered user Interface will be more user friendly than the conventional one and it will be having edge over others. However, it is quite difficult to Provide a single layered user Interface in a small screen. This study aims at examining how design attributes of mobile interfaces affect customer preferences. In order to explore customer preferences to each design attribute of mobile interfaces, we measure and analyze customer's WTP (Willingness To Pay) toward their different interface designs. Ultimately, throughout the study, we try to answer how to design mobile interfaces in small screen of mobile devices. In addition, we propose an optimal design solution that customers likely prefer.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.100.2-100.2
• /
• 2012

Surface texturing of crystalline silicon is carried out in alkaline solutions for anisotropic etching that leads to random pyramids of about $10{\mu}m$ in size. Recently textured pyramids size gradually reduced using new solution. In this paper, we investigated that texture pyramids size had an impact on emitter property and front electrode (Ag) contact. To make small (${\sim}3{\mu}m$) and large (${\sim}10{\mu}m$) pyramids size, texturing times control and one side texturing using a silicon nitride film were carried out. Then formation and quality of POCl3-diffused n+ emitter in furnace compare with small and large pyramids by using SEM images, simulation (SILVACO, Athena module) and emitter saturation current density (J0e). After metallization, Ag contact resistance was measured by transfer length method (TLM) pattern. And surface distributions of Ag crystallites were observed by SEM images. Also, performance of cell which is fabricated by screen-printed solar cells is compared by light I-V.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.7 no.3
• /
• pp.121-129
• /
• 2002

Existing methods for optimization of sequences by random mutagenesis generate libraries with a small number of mostly deleterious mutations, resulting in libraries containing a large fraction of non-functional clones that explore only a small part of sequence space. Large numbers of clones need to be screened to find the rare mutants with improvements. Library display formats are useful to screen very large libraries but impose screening limitations that limit the value of this approach for most commercial applications. By contrast, in both classical breeding and in DNA shuffling, natural diversity is permutated by homologous recombination, generating libraries of very high quality, from which improved clones can be identified with a small number of complex screens. Given that this small number of screens can be performed under the conditions of actual use of the product, commercially relevant improvements can be reliably obtained.

• Journal of the Korean Ceramic Society
• /
• v.53 no.4
• /
• pp.381-385
• /
• 2016

Recently, white LEDs, especially, warm white LEDs have been intensively investigated due to outstanding optical properties, long term stability and low power consumption. In this study, mixed type and patterned type of remote phosphors were prepared by screen printing process employing green and red phosphor. Each type of remote phosphor exhibited distinctive photoluminescence spectrum. For example, the mixed type of remote phosphor exhibited unique spectrum, while the patterned type showed expectable spectrum depending on the concentration of phosphors. This indicates that a small amount of red phosphor dramatically reduced the green photoluminescence in the case of mixed-type remote phosphor, whereas the effect was negligible in the patterned-type remote phosphor. The possibility of undesirable chemical reaction was further investigated by using scanning electron microscopy and X-ray diffraction.

• Korean Journal of Computational Design and Engineering
• /
• v.16 no.5
• /
• pp.361-369
• /
• 2011

As smartphones came into wide use recently, it has become increasingly popular not only among young people, but middle-aged people as well. Most smartphones use capacitive full touch screen, so touch commands are made by fingers unlike the PDAs in the past that use touch pens. In this case, a significant portion of the smartphone's screen is blocked by the finger so it is impossible to see the screens around the finger touching the screen, and difficulty occurs in precise control used for small buttons such as qwerty keyboard. To solve this problem, this research proposes a method of using simple AR markers to improve the interface of smartphones. Sticker-form marker is attached to fingernails and placed in front of the smartphone camera Then, the camera image of the marker is analyzed to determine the orientation of the marker to perceive as onRelease() or onPress() of the mouse depending on the marker's angle of rotation, and use its position as the position of the mouse cursor. This method can enable click, double-click, drag-and-drop used in PCs as well as touch, slide, long-touch-input in smartphones. Through this research, smartphone inputs can be made more precise and simple, and show the possibility of the application of a new concept of smartphone interface.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.3
• /
• pp.225-234
• /
• 2015

Most mobile devices such as smartphones and tablets have a soft keyboard implemented on the LCD touch screen to receive text inputs from the user. Because the size of the LCD screen is small, many efforts are going on to develop efficient soft keyboard with less key buttons. Especially, Hangul soft keyboard needs much time, effort, and deep software technology in developing an Hangul automata program module. This paper introduces design and implementation details of our authoring tool for Hangul soft keyboard running in Android. The tool supports the user to build an unique soft keyboard easily. The authoring tool downloads the soft keyboard app to the user's smartphone and makes it run immediately.

• International Journal of Internet, Broadcasting and Communication
• /
• v.13 no.2
• /
• pp.195-207
• /
• 2021

In recent years, with the rapid growth of China's animation industry, the two-dimensional culture and consumption have been immersed in the daily lives of young people. The two-dimensional culture that mainly exists on young people is gradually entering the public's field of vision, making the two-dimensional culture not It is only restricted to the fixed fan circle, but is known to more people outside the circle. At the same time, the "barrage" (screen text) cultures in video websites has become popular with some film and television works, Internet terms, etc., and has attracted the attention on mainstream culture. On the one hand, its cultural products have appeared on traditional mainstream video websites and advertisements on provincial satellite TV. And in the program, on the other hand, a small part of the screen text and cultural terms are also used by some celebrities and other ordinary people who don't understand the meaning of the terms at all, and have caused widespread dissemination. Sometimes the video website itself is also mentioned, which obviously shows a difference. The tendency towards a kind of screen texts subculture to penetrate the mainstream culture.

• Journal of Biomedical Engineering Research
• /
• v.43 no.4
• /
• pp.219-229
• /
• 2022

In this study, we propose a miniaturized micro-ceramic heater device. After screen-printing a silver paste between pre-sintered two aluminum oxide plates to integrate a heating circuit, the device was fabricated through a low-temperature sintering process. In order to configure the optimal heating circuit integration condition, the output current evaluation and heating test were performed according to the number of screen prints of the silver paste at various voltages. A silver paste-based heating circuit printed with a line width of 200 ㎛ and a thickness of 60 ㎛ was successfully integrated on a pre-sintered alumina substrate through a low-temperature sintering process. In the case of the 5 times printed device, the thermal response showed a response rate of 18.19 ℃/sec. To demonstrate feasibility of the proposed device in the medical field, such as bio-tissue suturing and hemostasis, a voltage was applied to pig tissue in the device to test tissue change due to heat generated from the device. These results show the possibility that the proposed small ceramic heater could be used in the medical field based on its excellent temperature response.