• Journal of Biosystems Engineering
• /
• v.43 no.2
• /
• pp.119-127
• /
• 2018

Purpose: Fermented feedstuffs have been found to improve productivity, reduce manure odor, and increase immunity. However, because there is not a commercialized pelletizing system for fermented total mixed ration (TMR) for pig feeding in Korea, a pelletizing system using TMR fermented feed was developed. Methods: The particle size, density, and volumetric density of the TMR feeds used in the test were measured. The pellet durability index (PDI, %) value of the pelletized TMR feed based on its moisture content, and the amount of pellet production based on the rotation speed of the compression roller were measured. Results: The test materials, TMR1 and TMR2, were approximately compressed to 387 kg/m3 with 18.2% (w.b.) and 544 kg/m3 with 22.2% (w.b.), respectively. Throughout this pellet molding test, the moisture content from 15 to 20% (w.b.) of mixture feedstuffs, including fermented forage, could be used for pellet molding. Based on the results, a small-scale pellet molding system of fermented TMR was designed and manufactured for pig farms. As rotation speed increased, the throughput increased, whereas the moisture content decreased by approximately 2% (w.b.) because of pellet molding. The best yield of pellets with 94.2% PDI was of 536 kg/h at 135 rpm rotation speed. Conclusions: Although the throughput of the prototype increased as the rotation speed increased, it was difficult to operate because of the greater noise and the lower PDI (%) at the higher rotation speed of the pellet molding rotor. It was found that the best production of pellets using the prototype was 536 kg/h having a PDI of 94.2% or more at a rotation speed of 135 rpm.

• Journal of Conservation Science
• /
• v.35 no.4
• /
• pp.317-329
• /
• 2019

Slag was collected from the iron-producing furnace site in Saengsoegol, Baegun mountain, where iron was manufactured by a righteous army against Japan in the Gwangyang region; then, the iron-manufacturing technique of the early modern period was investigated through scientific analysis. In the microstructure analysis results of the selected samples, iron bloom was mainly observed together with magnetite and fayalite. In the component analysis results of the compounds, it was confirmed that the furnace was built by using gangue of alkali feldspar or plagioclase series, and the ironmaking work was performed at a high temperature of at least 1050℃, because mullite was identified together with cristobalite and hercynite. Based on the chemical composition, it was speculated that low-grade iron ores were used as raw materials, and it seemed that the yield was low, because the total Fe content of the smelting slag samples was 37.72-49.93%. It was difficult to confirm whether a slag former was used, and it seemed that materials easily obtained nearby were used when the furnace was built, without considering the corrosion resistance. It appeared that the ironmaking work was performed at the Gwangyang Saengsoegol iron-producing furnace based on the direct ironmaking method in an environment that could escape the vigilance of the Japanese Empire to produce weapons that would be used for the resistance against Japan. It seemed that there was neither an advanced ironware production system nor a mass production system, and small-scale works were performed in short periods of time.

• Journal of The Korean Astronomical Society
• /
• v.48 no.1
• /
• pp.83-92
• /
• 2015

Recent large scale surveys such as Sloan Digital Sky Survey have produced homogeneous samples of multiple-image gravitationally lensed quasars with well-defined selection effects. Statistical analysis on these can yield independent constraints on cosmological parameters. Here we use the image separation statistics of lensed quasars from Sloan Digital Sky Survey Quasar Lens Search (SQLS) to derive constraints on cosmological parameters. Our analysis does not require knowledge of the magnification bias, which can only be estimated from the detailed knowledge on the quasar luminosity function at all redshifts, and includes the consideration for the bias against small image separation quasars due to selection against faint lens galaxy in the follow-up observations for confirmation. We first use the mean image separation of the lensed quasars as a function of redshift to find that cosmological models with extreme curvature are inconsistent with observed lensed quasars. We then apply the maximum likelihood test to the statistical sample of 16 lensed quasars that have both measured redshift and magnitude of lens galaxy. The likelihood incorporates the probability that the observed image separation is realized given the luminosity of the lens galaxy in the same manner as Im et al. (1997). We find that the 95% confidence range for the cosmological constant (i.e., the vacuum energy density) is $0.72{\leq}{\Omega}_{\Lambda}{\leq}1.0$ for a flat universe. We also find that the equation of state parameter can be consistent with -1 as long as the matter density ${\Omega}_m{\leq}0.4$ (95% confidence range). We conclude that the image separation statistics incorporating the brightness of lens galaxies can provide robust constraints on the cosmological parameters.

• Korean Journal of Materials Research
• /
• v.5 no.5
• /
• pp.598-605
• /
• 1995

Thin films of $YB_{2}Cu_{3}O_{7-d}$ were prepared on various substrated of MgO(100), $SrTiO_{3}$, and $LaAlO_{3}$ by using off-axis magentron sputtering methods and annealing in-situ. The prarameters of film fabrication processes had been optimized through a "follow the lcoal maxima" strategy to yield good quality films in therms of the critical temperature $T_{c}$ and the critical current density $J_{c}$. Optimizedproecsses employing a plane magndtron and an cylindrical magnetron yielded $T_{c}$>90K along with $J_{c}$$10^{6}$A/$\textrm{cm}^2$ at 77K and > 2${\times}$$10^{7}$A/$\textrm{cm}^2$ at 5K. The sampels, however, showed degradationinthe properties, after chemical etching for fabrication of microbridges with the line width of 2-10 mocrons. In particular, the value of $T_{c}$ for the microbridges of 2microns was as small as 80%. The degradation was strongly dependent on the line width through a formula : $T_{c}$(e)=$T_{c}$)b) [1-a exp(-1000 bL)} where $T_{c}$(e) and $T_{c}$ (b) are the values of $T_{c}$ in the absolute scale measured after and before chemical etching, respectively and L is the line width in mm. By utilizing a best fitting technique, the proper constant values of a and to b were found as exp(-1.2) and 0.22, respectively. This formula was very useful in estimatiing the upper limit of the device operationtemperature.

• Journal of Microbiology and Biotechnology
• /
• v.27 no.7
• /
• pp.1233-1241
• /
• 2017

The ginsenoside Rh2 has strong anti-cancer, anti-inflammatory, and anti-diabetic effects. However, the application of ginsenoside Rh2 is restricted because of the small amounts found in Korean white and red ginsengs. To enhance the production of ginsenoside Rh2-MIX (comprising 20(S)-Rh2, 20(R)-Rh2, Rk2, and Rh3 as a 10-g unit) with high specificity, yield, and purity, a new combination of enzymatic conversion using the commercial enzyme Viscozyme L followed by acid treatment was developed. Viscozyme L treatment at pH 5.0 and $50^{\circ}C$ was used initially to transform the major ginsenosides Rb1, Rb2, Rc, and Rd into ginsenoside F2, followed by acid-heat treatment using citric acid 2% (w/v) at pH 2.0 and $121^{\circ}C$ for 15 min. Scale-up production in a 10-L jar fermenter, using 60 g of the protopanaxadiol-type ginsenoside mixture from ginseng roots, produced 24 g of ginsenoside Rh2-MIX. Using 2 g of Rh2-MIX, 131 mg of 20(S)-Rh2, 58 mg of 20(R)-Rh2, 47 mg of Rk2, and 26 mg of Rh3 were obtained at over 98% chromatographic purity. Then, the anti-cancer effect of the four purified ginsenosides was investigated on B16F10, MDA-MB-231, and HuH-7 cell lines. As a result, these four rare ginsenosides markedly inhibited the growth of the cancer cell lines. These results suggested that rare ginsenoside Rh2-MIX could be exploited to prepare an anti-cancer supplement in the functional food and pharmaceutical industries.

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.3
• /
• pp.453-465
• /
• 2014

The paper provides a review on bio-oil production technology from biomass by using fast pyrolysis to use heating fuel, power fuel and transport fuel. One of the most promising methods for a small scale conversion of biomass into liquid fuels is fast pyrolysis. In fast pyrolysis, bio-oil is produced by rapidly heating biomass to intermediate temperature ($450{\sim}600^{\circ}C$) in the absence of any external oxygen followed by rapid quenching of the resulting vapor. Bio-oil can be produced in weight yield maximum 75 wt% of the original dry biomass and bio-oils typically contain 60-75% of the initial energy of the biomass. In this study, it is described focusing on the characterization of feedstock, production principle of bio-oil, bio-oil's property and it's application sector.

• Journal of the Semiconductor & Display Technology
• /
• v.20 no.1
• /
• pp.25-31
• /
• 2021

The semiconductor and display equipment demands an ultra-fine precision of several nm to several ㎛, and the scale is getting smaller due to the explosive development. The manufacturing process equipment for such products with ultra-fine precision is very sensitive to ultra-small vibrations flowing from the floor, resulting in problems of production defects and yield degradation. The vibration criteria are a standard that regulates the vibration environment of the floor where such precision process equipment will be installed. The BBN vibration criteria defined the allowable vibration velocity level in the frequency domain with a flat and inclined line and presented a rating according to it. However, the actual vibration criteria have appeared with various magnitudes in the frequency domain according to the dynamic characteristics of individual equipment. In this study, the relationship between the relative motion of two major points in the equipment and the vibration magnitude of the floor is presented using the frequency response function of a simple 3-DOF model. It is describing the magnitudes according to the frequency of the floor vibration that guarantees the allowable relative motion and this can be used as the vibration criteria. In order to obtain the vibration criteria experimentally a method of extracting through a modal test was introduced and verified analytically. It provides vulnerable frequency and magnitude to floor vibration in consideration of the dynamic characteristics of individual equipment. And it is possible to know necessary to improve the dynamic characteristics of the equipment, and it can be used to check the vibration compatibility of the place where the equipment will be installed.

• Korean Journal of Agricultural Science
• /
• v.35 no.1
• /
• pp.101-118
• /
• 2008

This paper reviews the present situation of Triticale cultivation and examines the potentiality of contribution to livestock as well as poultry sector in Bangladesh Agriculture. Triticale is a human-made cross between rye and durum wheat that has the ability to produce quality green fodder, and then re-grow after first and second cutting to produce grain. In Bangladesh, it is a non-traditional cereal that grows well during the cool and dry Rabi season (November-March) when fodder and feed scarcity is a major limiting factor for ruminant livestock. In Bangladesh Triticale was started to grow in the late Ninety's. The scientists of Bangladesh Agricultural Research Institute (BARI) were first introduced triticale in Bangladesh. Still now the situation of Triticale is grown as fooder and feed in Bangladesh within the scientists under trial. High quality grass fodder was obtained by cutting green triticale plants twice, at 35 and 50 days after seeding, while later the ratooning tillers produced grain to a yield of 1.1-2.4 t/ha of grain for poultry feed or human food. Triticale straw was twice as nutritious as rice or wheat straw and its grain contained more protein than other cereals. Researchers and farmers have also successfully made triticale hay and silage from a mixture of triticale green cuttings, rice straw and molasses. A feeding trial at Bangladesh Livestock Research Institute(BLRI), Savar station showed a large(46%) increase in cow live weight gain and a 36% increase in milk yield (but no change in milk quality or dry matter intake) in cows fed triticale silage compared with those fed rice straw over a period of nine weeks. In another feeding trial, it was found that triticale grain was a good replacement for wheat in the feed blend for chickens in Bangladesh. So it will be a good chance to alive our livestock as well as poultry sector if triticale enters to our existing cropping system as fodder cum grain. The challenge in Bangladesh is to identify fodder technologies that match existing small-scale farmer cropping patterns without needing major inputs or increasing risks. Preliminary field experiments revealed that triticale is a crop with good potential to produce quality fodder and grain for small scale farmers in Bangladesh.

• Fire Science and Engineering
• /
• v.16 no.3
• /
• pp.32-38
• /
• 2002

The synthesis of $CF_3$I and $C_2F_5I from $CF_3Br$ was studied for the reuse of $CF_3Br$ which is abolished to save the ozone layer of the earth. Reaction experiments were carried out in experimental scale synthesis equipment with catalysts, such as CuI, Kl, $K_2$$CO_3$, KF metal salt/active carbon and alumina support at $400~600^{\circ}C$. Main products of reaction were $CF_3i$ and $C_2F_5I$ with small amounts of $C_2F_5I$, $CF_4$, $CF_2Br_2$ by-products. 7.5wt% KI and $K_2CO_3$over activated carbon catalysts show the highest yield of $CF_3$I and 7.5wt% CuI over alumina catalysts show the highest yield of $C_2F_5i$. And optimal reaction temperature was about $500^{\circ}C$.

• Food Science and Preservation
• /
• v.22 no.5
• /
• pp.714-720
• /
• 2015

Biji is a tofu by-product made by squeezing the liquid out of the dregs left over from making tofu. The objectives of this research were to break the biji into sub-micron-scale particles and to prepare a biji sub-micron suspension having increased quality characteristics such as antioxidant capacity, polyphenol, dietary fiber, and soluble protein contents, in comparison with untreated biji. Disruption of biji by an ultra-high-pressure homogenization (UHPH) process was used to prepare the sub-micron suspension of biji. UHPH can be used to prepare emulsions or suspensions with extremely small particle sizes. The effect of the UHPH process on biji was studied at 1,000, 1,500, and 2,000 bar. The extraction yield increased up to 1.64 times by breaking the biji to form a sub-micron suspension. The soluble dietary fiber, protein, and free amino acid contents were increased by the UHPH process (p<0.05), in comparison with those of untreated biji. Furthermore, the total sugar, free sugar, and total polyphenol contents of biji were augmented by the UHPH process. Antioxidant activity (ABTS) after exposure to UHPH (1,000-2,000 bar) was well retained (p<0.05). The extraction efficiencies and nutritive components were enhanced by increasing the pressure in the UHPH process.