• 한국정밀공학회지
• /
• 제18권2호
• /
• pp.186-191
• /
• 2001

A crack with electrically impermeable surfaces in an electrostrictive material subjected to uniform electric loading is analysed. The effect of electric yielding on stress intensity factor is investigated by using a small scale yielding model and a strip yield zone model. Complete forms of electric fields and elastic fields are derived by using complex function theory. The electrical yield zone shapes for two models are different each other. The two models, however, predict similar yield zone sizes under the small scale yielding conditions. It is found that the influence of electric yielding on the stress intensity factor is insensitive to the modeling of the electrical yield zone shape.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2000년도 춘계학술발표대회
• /
• pp.347-350
• /
• 2000

Enzymatic deinking of office-waste paper was studied using crude cellulase and papain-hydrolyzed cellulase from Trichoderma reesei Rut C-30 in small-scale and mid-scale. The results were compared with deinkings using commercial enzyme(Novozym 342) and conventional chemical methods. Maximum brightness and freeness were obtained at 3 units/g Oven Dry Paper(ODP) of CMCase activity using crude cellulase in mid-scale deinking experiments. The deinked pulp had higher physical strength and brightness, and lower freeness and yield than the pulp deinked in small scale. In small scale deinking, maximum brightness and freeness were obtained at 2 unit/g ODP. Deinking by papain-hydrolyzed cellulase showed similar results with one by Novozym 342. It was better in brightness and freeness, but showed lower physical strength and yield, than the conventional deinking by sodium hydroxide. The ratio of endo-1,4-glucanase and exo-1,4-glucanase components in papain hydrolyzed cellulase from T. reesei Rut C-30 was similar to that of commercial enzyme, Novozym 342, implicating a successful application as a deinking enzyme.

• 임산에너지
• /
• 제21권2호
• /
• pp.1-9
• /
• 2002

소용량 실험실용 탄화로 및 3종류의 대형 탄화로 (간이 탄화로 (400 - 500℃), 개량 탄화로(600 - 700℃) 및 전용탄화로 (800 - 1,000℃))를 이용하여 소나무 수피의 탄화를 실시하였다 그리고 제조된 수피탄의 물성과 세공구조를 분석하였다. 소나무 수피를 실험실용 소용량 탄화로를 이용하여 질소 존재하에서 500℃에서 900℃까지의 다양한 온도 조건에서 탄화시키면, 탄화수율은 탄화 온도의 증가와 함께 급속하게 낮아졌으며, 700 - 900℃에서 일정하게 유지되었다. 수피의 탄화수율은 동일 탄화온도에서 소나무 목부의 탄화수율보다 16 - 18％더 높았다. 제조된 수피탄의 BET 비표면적은 탄화수율 약 35 - 40％에서 약400 - 500㎡／g 을 나타내었다. 600℃ 30분의 탄화조건에서 제조된 소나무 목부탄은 미세공이 많이 발달해 있었으나, 동일조건에서 제조된 수피탄이 경우 미세공은 물론 중세공도 많이 존재하였다. 대형 탄화로에서 제조된 수피탄의 탄화 수율 및 요오드가 및 BET 비표면적은 소용량 탄화로의 결과와 매우 유사하였다. 이러한 결과는 소나무 수피가 높은 비표면적과 수율을 가지는 양질의 숯을 생산 할 수 있는 원료로 사용될 수 있음을 나타낸다.

• Animal cells and systems
• /
• 제3권1호
• /
• pp.73-78
• /
• 1999

Although there are several methods for the preparation of mitochondrial DNA (mtDNA) from mammalian tissues, most are relatively long ultracentrifugation or manipulations by a small-scale method. We escribed a rapid method for large-scale extraction of mtDNA from human placental and horse liver tissues. The method is based on the preparation and homogenization of tissues, urification of crude mitochondria by differential centrifugations and isolation of mtDNA by alkaline Iysis. It was improved from Pre-existing methods by replacing some steps with simpler ones and discarding many others. This method gives a high yield of pure mtDNA(approximately 1-5mg from one placenta; ca. 400-600 g wet weight), depending on its sources (fresh tissue gave better results than frozen one). The resulting mtDNA indicated that this method can yield mtDNA in sufficient purity and quantity to identify the direct restriction analysis on agarose gel, random-primed labeling as a probe, and end labeling. Therefore, the method is ideal for obtaining good mtDNA samples to conduct routine restriction fragment length polymorphism (RFLP) analyses of natural populations for genetic studies.

• Journal of Biosystems Engineering
• /
• 제33권5호
• /
• pp.362-369
• /
• 2008

There is developing interest in precision agriculture in Korea, despite the fact that typical Korean fields are less than 1 ha in size. Describing within-field variability in typical Korean production settings is a fundamental first step toward determining the size of management zones and the inter-relationships between limiting factors, for establishment of site-specific management strategies. Measurements of rice (Oriza Sativa L) yield, chlorophyll content, and soil properties were obtained in a small (100-m by 30-m) Korean rice paddy field. Yield data were manually collected on 10-m by 5-m grids (180 samples with 3 samples in each of 60 grid cells) and chlorophyll content was measured using a Minolta SPAD 502 in 2-m by 2-m grids. Soil samples were collected at 275 points to compare results from sampling at different scales. Ten soil properties important for rice production in Korea were determined through laboratory analyses. Variogram analysis and point kriging with and without median polishing were conducted to determine the variability of the measured parameters. Influence of variogram model selection and other parameters on the interpretation of the data was investigated. For many of the data, maximum values were greater than double the minimum values, indicating considerable spatial variability in the small paddy field, and large-scale spatial trends were present. When variograms were fit to the original data, the limits of spatial dependency for rice yield and SP AD reading were 11.5 m and 6.5 m, respectively, and after detrending the limits were reduced to 7.4 m and 3.9 m. The range of spatial dependency for soil properties was variable, with several having ranges as short as 2 m and others having ranges greater than 30 m. Kriged maps of the variables clearly showed the presence of both large-scale (trend) variability and small-scale variability in this small field where it would be reasonable to expect uniformity. These findings indicate the potential for applying the principles and technology of precision agriculture for Korean paddy fields. Additional research is needed to confirm the results with data from other fields and crops.d similar tendency with the result for the frequency less than 20 Hz, but the width of change was reduced highly.

• 한국농공학회논문집
• /
• 제54권5호
• /
• pp.79-89
• /
• 2012

The objectives of this paper were to evaluate the wind flow behind the livestock ventilation fan for small-scale wind power generation and to make flow profiles of imaginary ventilation fan for future simulation works. The field experiments using typical 50-inch fan indicated that the wind flow behind the ventilation fan had a good possibility of power generation with its high and steady wind speeds up to a distance of 2 m. The expected electricity yield was almost 101~369 W with a small (0.8 m radius) wind turbine. The decline of ventilation fan performance caused by the obstacle was also not significant with about 4 % from a distance of 2 m. The flow profiles for the computational fluid dynamics (CFD) simulation was created by combining the direction vectors analyzed from tuft visualization test and the flow predicted by the rotating fan modeling. The flow profiles are expected to provide an efficient saving of computational time and cost to design a better wind turbine system in future works.

• 한국구조물진단유지관리공학회 논문집
• /
• 제16권3호
• /
• pp.51-59
• /
• 2012

본 연구에서는 도로용 패널로 사용되는 프리캐스트 콘크리트 슬래브의 양중, 이동 및 설치 등 제품의 제작 및 시공 시 발생될 수 있는 양중에 따른 안전 설계요소를 분석하였다. 그 결과를 토대로 축소형 슬래브(Full-scale용 슬래브의 1/2 크기 규모로 $1.8m{\times}3m{\times}0.15m$) 2개와 Full-scale용 슬래브($3.9m{\times}5.95m{\times}0.29m$) 1개를 제작하였으며, 콘크리트 및 철근 게이지를 설치하여 슬래브의 양중 및 트럭에 적재하여 이동 시 급작스런 동적거동으로 인해 발생되는 콘크리트 슬래브의 변형률을 측정하였다. 축소형 슬래브의 경우 60도로 양중 시 정지상태의 변형률에 비해 약 3.54배의 변형률에 도달하였다. 그러나 Full-scale용 슬래브는 양중 및 운반 중의 동적 거동을 계측한 결과 동적변형률이 그리 크지는 않아 양중과 운반 시에 파손될 염려는 거의 없는 것으로 판단되어 본 연구에서 채택한 양중 시스템의 안전성을 확인하였다.

• Nuclear Engineering and Technology
• /
• 제51권6호
• /
• pp.1589-1595
• /
• 2019

In this paper, the CLAM steel strengthened by micro-scale Y-Zr-O was prepared by vacuum induction melting followed by electroslag remelting (VIM-ESR). Yttrium (Y) and zirconium (Zr) were easy to aggregates into massive yttrium-zirconium-rich inclusions in the steel melted by vacuum induction melting (VIM), which would interrupt the continuity of the matrix and reduce the mechanical properties of steel. Micron-sized Y-Zr-O inclusions would be produced with the removal of original blocky Y-Zr-rich inclusions and the submicron-sized inclusions smaller than $0.2{\mu}m$ could be retained in the steel. The small grain size and the better refinement and distribution uniformity of Y-Zr-O inclusions after remelting would be responsible for the better yield strength and toughness. For VIM-ESR alloy, the ultimate tensile strength is 749 MPa and the yield strength is 642 MPa at room temperature, meanwhile they are 391 MPa and 367 MPa at $600^{\circ}C$, respectively. Meanwhile, the ductile-brittle transition temperature (DBTT) reduced from $-43^{\circ}C$ (VIM) to $-76^{\circ}C$ (VIM-ESR).

• 한국정밀공학회지
• /
• 제20권6호
• /
• pp.138-144
• /
• 2003

A crack in a ferroelectric ceramic subjected to an electric field is analyzed. The boundary of the electrical saturation zone is estimated based on the finite-width saturation zone model, which is analogous to a finite-width Dugdale zone model for mode III. It is shown that the shape and size of the switching zone depends strongly on the boundary of the electrical saturation zone and the ratio of the coercive electric field to the yield electric field. The crack tip stress intensity factor under small scale conditions is evaluated by employing the model of electric nonlinear domain switching. It is found that fracture toughness of the ferroelectric material may be increased or decreased depending on the material property of electrical nonlinearity.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제55권7호
• /
• pp.359-363
• /
• 2006

Single-walled carbon nanotubes (SWCNTs) with few defects and very small amount of amorphous carbon coating have been synthesized by catalytic decomposition of methane in $H_2$ over well-dispersed metal particles supported on MgO. The yield of SWCNTs was estimated to be 88.5% and the purities of SWCNTs thus obtained were more than 90%. Peak of the radial breathing mode in the Raman spectrum demonstrated that the diameters of synthesized CNTs are in the range 0.4-2.0 nm. Our results also indicated that MgO support materials are useful to a large-scale synthesis of high-quality SWCNTs. Increasing temperature could remarkably increase the yield and also improve the quality of SWCNTs from catalytic decomposition of methane. The morphologies and microstructures of the synthesized carbon materials were characterized by scanning electron microscopy (SEM), Thermogravimetric analysis (TGA), Raman spectroscopy, and X-ray diffraction (XRD).