• 문화기술의 융합
• /
• 제8권6호
• /
• pp.775-785
• /
• 2022

이 연구는 소규모 건설현장 근로자의 화재안전관리 운영실태를 분석하고 문제점을 도출하여 개선방안을 제시함으로써, 향후 이들이 효율적으로 활용하기 위한 실무적 기초자료를 제시함을 목적으로 연구를 수행한 결과, 다음과 같은 결론을 얻었다. 첫째, 소규모 건설공사현장 근로자는 건설기능인력의 연령대가 고령자이고, 종사경력은 건설기능력이 짧았으며, 직종은 대다수가 건축공종에 작업을 하고 있으며, 고용형태는 비정규직 일당제로 근무를 하고 있는 것으로 분석 되었다. 둘째, 소규모 건설공사현장 근로자들의 화재안전관리 개선방안으로 화재 위험성 요인에 대한 허가와 관리를 체계화하고, 화재위험관리를 위해 소방안전관리자를 배치하여 관리감독하는 장치가 필요하겠으며, 화재시 다양한 피난통로 확보와 화재 발생을 건설공사 현장 내 모든 작업자들에게 알릴 수 있는 비상경보설비를 갖추고, 피난경로 접근과 시야 확보가 취약한 지하공간에 대해서는 간이피난유도선과 비상조명등을 임시소방시설로 설치를 강화하는 방안을 제시하였다. 또한, 현실적인 대피훈련, 화재VR훈련, 흥미있는 교육프로그램 개발을 통해 산업재해를 줄이는 방안이 필요하다.

• 한국보건간호학회지
• /
• 제14권1호
• /
• pp.147-160
• /
• 2000

This study was carried out to investigate awareness and attitude of monitors in 206 small sized industries in Seoul and Kyeonggi area toward the occupational health programs using a specially prepared questionnaire. The industries had been running Government-Funded Subsidiary Program since 1998. The questionnaire was designed to be self-administered by respondents. Data were collected for two months from November to December, 1998. Major results are as follows: 1. Between two groups of industries, there were no significant differences in classification, scale, methods of production, existence of trade union, but in type of working pattern and facility ownership there were significant differences. 2. Between two groups of monitors, there were no significant differences in gender, age, marital status, rank, years of education, but in duration of working there was a significant difference. 3. In awareness and attitude of monitors toward their activities and occupational health programs, there was no significant difference by groups of industries, but a significant difference by type and scale of industry, gender, age, years of education 4. It was found that newly subsidized industries were more necessary to provide education programs on occupational health than old industries, and there was a significant difference between two groups of industries in the contents of education needed. In conclusion, it is desirable that the government should develop specific training programs for monitors on occupational health to provide them practical knowledge and specific skills which monitors can apply to their specific situation, and implement the training programs and continue Government-Funded Subsidiary Program for years until small scale industries would have been able to develop and keep their own health management system spontaneously.

• 한국산업보건학회지
• /
• 제8권1호
• /
• pp.133-145
• /
• 1998

The purposes of this study were to assess current status of respirator usage among workers in the small-scale industries and to identify those factors causing respirator wearers not to continuously wear respirators during work. Total 168 workers participated voluntarily in the survey. In order to cover all possible reasons, though not exclusive, 33 diverse questions were developed based upon the results in the published literatures and from researchers' own experience. The most common type of respirator worn was the disposable single-use respirator(42%). However, masks made of gauze, which should not be considered as a respirator, were widely used (38%). Only 28% of respondents indicated they wear respirators continuously during work. The major reasons for removing respirators include, in descending order of frequency, difficulty in breathing (46%), sweating (39%), bothered by frequent removal (21%), inadequate mask size (19%) and hot air temperature inside the respirator (19%), etc. In addition, minor reasons including mask design, administrative, and personal reasons were also identified. These reasons should be considered in a well designed respirator program in order to improve workers' acceptance and usage of respirators.

• 한국지능시스템학회논문지
• /
• 제20권1호
• /
• pp.21-29
• /
• 2010

일반적으로 풍력발전은 광범위한 영역에 지속적인 바람을 요구하는 대형 시스템 위주로 개발이 되어왔다. 그러나 소형 풍력발전 시스템은 유저에게 보다 친숙하고, 대형에 비해 보다 광범위한 적용이 가능하다는 점 때문에 최근 이에 대한 관심이 증가되고 있는 실정이다. 이에 본 연구에서는 배터리 충전에 효과적으로 도입될 수 있는 도시형 풍력발전을 위한 프로토타입 시스템에 대해 기술하며, 프로토타입 시스템에 효과적으로 도입될 수 있는 퍼지로직 기반의 최대 전력점 추종 알고리즘을 제안하고자 한다. 또한 제안된 기법의 유용성 확인을 위해 Matlab을 통한 시뮬레이션 및 이를 통해 얻어진 알고리즘을 실제 DSP에 적용하여 보고자 한다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1999년도 전력전자학술대회 논문집
• /
• pp.248-251
• /
• 1999

Recently, according to developing industry and life style, power consumption have been increased year after year. Currently these much power demand from power consumer is weakening the allowable power reverse margin in summer. As on of the remedies about this problem, the small scale grid-connected photovoltaic system is considered for auxiliary power source. Generally, grid-connected inverter have a isolation transformer for electrical isolation from utility. This paper propose transformerless system topology an inquiry the validity using simulation.

• 수산경영론집
• /
• 제25권2호
• /
• pp.1-46
• /
• 1994

The Purpose of this research is to analyze and discuss the development of yellowtail aquaculture industry in Japan and its management structure. The research includes the following : (a) It confirms the industrial conditions of yellowtail aqaculture which has a national technical and mass production system that has been developed at great speed. (b) It analyzes yellowtail aqaculture development from a family - oriented management to a large scale production. (c) It examines how the fisheries cooperatives harmonized their role with the object of individual aqaculture management and aqaculture fishing ground management. The reasons for this study focusing on the yellowtail aqaculture industry of Japan are : (a) The yellowtail aqaculture is regared as a typical field in aqaculture because it reflects the general aqaculture history, quantity of fisheries aqaculture product, the number of fishermen involved in this industry, technology , and the live and fish market formation in Japan. (b) The aqaculture has the most powerful entrepreneurial in financial and management style. The aqaculture industry also has a most individual management style which includes planned production and shipping strategy. This research has attempted to study the industrial processes of fisheries aqaculture industry and its management development, and focused on the yellowtail aqaculture industry of Japan. This work also includes data about the aqaculture management of fisheries cooperatives and case by case analysis of aqaculture production. The following results were obtained from this study : First, even though ocean, weather conditions, and widespread propagation of places suitable for aqaculture in Japan were crucial factors in aqaculture development, it must be pointed out that fisheries policy in Japan changed from "catching" in the 1960s to "cultivating". Second, the widespread course of fisheries cultivating technology in Japan has had two characteristics. One is that early aqaculture technology spread to the southern part of Japan and the other is that the metal nets were widely used in the northern part in the 1970s. Japan's yellowtail aqaculture industry's overproduction was due to metal nets. However, the use of mwtal nets also contributed to the improvement of aqaculture and the strategic aspects of aqaculture management. In addition, it should be stressed that Kagoshima prefecture as the pioneer of metal nets contributed to fisheries aqaculture development in japan. Third, as aqaculture technology developed, entrepreneurial qualities of aqaculture management also developed this field into a large scale business. Even though it is not clear, large scale management of yellowtail aqaculture shows evidence of superiority over small andmedium - size management of yellowtail aqaculture. Fourth, yellowtail aqaculture management in Japan hascontributed to the production system and aqaculture strategy to meet consumers' needs and market demands from weather - oriented trational fisheries industry, which overcame their overproduction structure. Fifth, Japanese fisheries cooperative played very important roles in the prevention of fishing grounds production from destruction and in promoting suitable aqaculture facilities so that aqaculture could grow continually.ld grow continually.

• 한국가구학회지
• /
• 제28권2호
• /
• pp.118-125
• /
• 2017

This study aims to report on the problems of the Korean woodcraft in the past and to suggest a new direction for the development strategy, in line with the government policy to promote domestic craft culture industry. This includes the problems of the woodcraft in Korea which have been raising in contest-exhibits organized not only by industry and academia, but also by government. The survey asked 48 people (24 in industry and 24 in academia) shows as follows. The most serious problem shown in industry is the government-sponsored issue and it should be premised on offering the market in this case. The question in academia reports that the academic world little contributes to the development in industrial circles of the woodcraft, and the problematic issues of the contests are the appraisal standard and the method of evaluation. In brief, the government's aggressive support should be always first and foremost for the woodcraft industry which is often confronted with difficulties in research & development and in securing distribution channels due to it' small scale of business. Furthermore, the government-led contest and certificate of qualifications should be redesign for filling the original purpose and throughly carried out for the development of industries. Also university curriculum being far too disconnected from industries now should be focused on the collaboration between industry and university, the training mission and the related seminars to overhaul the contents of the department of the woodcraft and to create a progressive direction for the future accordingly.

• 산업경영시스템학회지
• /
• 제38권3호
• /
• pp.29-38
• /
• 2015

In this paper, scale efficiencies and relative efficiencies of R&D projects in Industrial Technology Program, sponsored by Ministry of Trade, Industry and Energy, Korea, are calculated and compared. For the process, various DEA (Data Envelopment Analysis) models are adopted as major techniques. For DEA, two stage input oriented models are utilized for calculating the efficiencies. Next, the calculated efficiencies are grouped according to their subprograms (Industrial Material, IT Fusion, Nano Fusion, Energy Resources, and Resources Technology) and recipient types (Public Enterprise, Large Enterprise, Medium Enterprise, Small Enterprise, Lab., Univ., and etc.) respectively. Then various subprograms and recipient types are compared in terms of scale efficiencies (CCR models) and relative efficiencies (BCC models). In addition, the correlation between the 1st stage relative efficiencies and the 2nd stage relative efficiencies is calculated, from which the causal relationship between them can be inferred. Statistical analysis shows that the amount of input, in general, should increase in order to be scale efficient (CCR models) regardless of the subprograms and recipient types, that the 1st and 2nd stage relative efficiencies are different in terms of the programs and recipient types (BCC models), and that there is no significant correlation between the 1st stage relative efficiencies and the 2nd stage relative efficiencies. However, the results should be used only as reference because the goal each and every subprogram has is different and the situation each and every recipient type faces is different. In addition, the causal link between the 1st stage relative efficiencies and the 2nd relative efficiencies is not considered, which, in turn, is the limitation of this paper.

• Tribology and Lubricants
• /
• 제24권1호
• /
• pp.27-33
• /
• 2008

A micro-impression creep machine was designed and developed, adopting a small punch in diameter of 150 um, displacement gage with an accuracy of sub-${\mu}m$ scale, and load-cell with an accuracy of mN scale in order to investigate creep behavior of small solder ball in diameter of less than 1 mm. Creep behavior of lead-free solder ball(Sn-3.0Ag-0.5Cu) in diameter of $760\;{\mu}m$ was investigated in the stress range of $8{\sim}60\;MPa$ and at $303\;K{\sim}393\;K$. The applied load became decreased slightly and continuously in the creep rate of $10^{-4}/s$ range during the current experiments. Also, the machine frame was so sensitive to the environmental temperature that nm scaled displacement recording was unstable according to the change in environmental temperature.

• 한국전기전자재료학회논문지
• /
• 제33권4호
• /
• pp.326-330
• /
• 2020

Small-scale production control systems for smart manufacturing are becoming increasingly necessary as the manufacturing industry seeks to maximize manufacturing efficiency as the demand for customized product production increases. Correspondingly, the development of an embedded system to realize this capability is becoming important. In this study, we developed an embedded system based on an open source system that is cheaper than a widely applied programmable logic controller (PLC)-based production control system that is easier to install, configure, and process than a conventional relay control panel. This embedded system is system is based on a low-power, high-performance Cortex M4 processor and can be applied to smart manufacturing. It is designed to improve the development environment and compatibility of existing PLCs, control small-scale production systems, and enable data collection through heterogeneous communication. The real-time response characteristics were confirmed through an operation test for input/output control and data collection, and it was confirmed that they can be used in industrial sites.