• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.3
• /
• pp.355-361
• /
• 1987

Creep and fatigue tests were carried out on crack growth properties of small surface cracks in 304 stainless steel at 538.deg.C, 593.deg. C and 650.deg. C in air, by using small plate specimens with a small artificial pit. All the data of the crack growth rate per hour obtained in the present tests were correlated with the maximum stress intensity factor, so that the applicability of linear fracture mechanics to the crack growth of surface cracks at elevated temperature was investigated. In the creep test, relatiion of .sigma.$\^$n/.t$\_$f/=C is obtained between failure time and nominal stress at each temperature level, where n has the value of 11-14 depending on the temperature level. In the creep and fatigue crack growth properties of surface cracks at the elevated temperatures, the maximum stress intensity factor, $_{4}$$\_$max/, is some extent applicable parameter to describe the surface crack growth rate under the present experimental conditions. The crack growth rate per hour increases when the holding time decreases, and creep crack growth rate per hour becomes the lowest limit of crack growth rate per hour in this tests.

• Journal of the Korean Wood Science and Technology
• /
• v.14 no.1
• /
• pp.3-44
• /
• 1986

In order to obtain the basic physical and mechanical properties of steel wire reinforced particleboard, particleboards were formed with large particles through 2.11 mm (12 meshes) and retained on 1.27mm (20 meshes) sieves and small particles through 1.27mm (20 meshes) and retained on 0.42mm (60 meshes) sieves from the plywood mill wastes of meranti (Shorea spp.) in the form of pallmanchips, applying urea-formaldehyde resin as an adhesive on the particle surface in 10 percent on the oven dried weight of particles, and arranging steel wires of 1mm in diameter 5,10,15,20, and 25mm in longitudinal and transverse direction with crossing in the mid of the board depth in single layer boards, 10mm in longitudinal or transverse direction without crossing in two layers and 10mm in longitudinal and transverse directions with and without crossing in three steel wire layers boards. The stepwise 9-minutes-multi-pressing schedule in 5 minutes at 35 kgf/$cm^2$, 2.5 minutes at 25 kgf/$cm^2$. and 1.5 minutes at 15 kgf/$cm^2$ was applied for $300{\times}200{\times}13$mm board at the temperature of 160$^{\circ}C$ in a hot press. Specific gravity, thickness swelling, bending properties of modulus of rupture (MOR), modulus of elasticity(MOE), work to proportional limit, and work to ultimate load, internal bond (IB), and screw holding power(SHP) of the reinforced boards were analyzed on the wire openings and wire layers. The results obtained are summarized as follows; 1) In specific gravity, particleboards with large particles and small particles had higher value with more steel wire placements and more steel layers composition, 2) Particleboards with large particles in accordance with more steel wire liners composition gave very poor thickness swelling. 3) The mechanical properties of particleboards formed with large or small particles were reinforced with more steel wire layers. Therefore, bending strength was improved in modulus of rupture, modulus of elasticity, and work to ultimate load. Especiallv, particleboards with two or three steel wire layers showed the tension lamination effect when the steels in lower steel wire layer were oriented parallel to the board length. 4) The modulus of rupture, modulus of elasticity, and work to ultimate load in bending varied with opening area, distance of lengthwise wires multipled by distance of transverse wires. Particleboards formed with large particles resulted in higher value in modulus of rupture with 1.5-3 $cm^2$ opening area, 1-2cm distance between transverse wires, and 1.5-2.5cm distance between lengthwise wires. Particle boards formed with small particles showed higher value with 0.5-1.5$cm^2$ or 3.75-6.25 $cm^2$ opening area, 0.5 or 2.5cm distance between transverse wires. 5) In modulus of elasticity, particleboards formed with large particles with one steel wire layer suggested higher value with 5-3$cm^2$ opening area, 1-2.5cm distance between transverse wires and also 1-2.5 cm distance between lengthwise wires. Particleboards formed with small particles showed higher value with 0.75-1.25$cm^2$ or 3-6.25$cm^2$ opening area and 0.5 or 2.5cm distance between transverse wires. 6) Particleboards formed with large particles gaved higher value in work to ultimate load with 1-3$cm^2$ opening area. Particleboards formed with small particles showed increasing tendancy with decreasing opening area. 7) In internal bond and screw holding power, particleboards formed with large particles had increasing value in two and three steel wire layers compositions, but particleboards formed with small particles showed no difference. Particleboards formed with large particles containing one steel wire layer showed no difference in internal bond and screw holding power, and particleboards formed with small panicles containing one steel wire layer resulted in increasing value in internal bond and decreasing value in screw holding power in accordance with increase in opening area.

• Journal of the Korean Society for Library and Information Science
• /
• v.18
• /
• pp.55-98
• /
• 1990

This research attempts to verify the hypothesis that the workers in the small-and medium-sized industries use more informal information channels than formal ones do to get the information necessary to industrial activities. Information sources are divided by the internal and the external ones and these are sub-divided by their acquiring channels, publishers and holding institutions. It is intended to investigate the information sources according to the use frequency, age, origin and format of documents used. The degree of benefit to the workers in their practical work through the use of information sources and the use frequency of information sources by the department and years of experience are also investigated. The data to test the hypothesis was collected through the questionnaires distributed to the workers in 300 sampled firms from June 5 to June 20, The following facts have been verified as the result : 1. Workers in industries acquire information mainly through the contacts with the colleagues or superiors in their departments, and the junior workers depend more on the colleague and superiors than senior workers are. 2. Among the documents published internally, the ones from the research and development departments are mostly used. The documents issued by the worker's own departments are also frequently used and the senior workers, the more frequently use the internal publications than the junior workers do. 3. Among the internal documents stored in various places in the industries, the documents kept in the worker's own departments are used most frequently. The senior workers the more use privately owned documents than the junior workers do. 4. As far as the external channels are concerned, information is obtained mainly through suppliers of equipment and raw materials and the use frequency of information channels varies according to department. The senior workers the more receive information through supporting institution, seminar and exhibition than the junior workers do. 5. Among the external publication, the ones published by the industrial supporting institutions are heavily used and the workers in research and developments frequently use the external publications. 6. The documents held in governmental industrial institutions and industrial supporting institutions are heavily used compared with the ones stored in other external institutions. The holding places of frequently used documents vary according to the working departments. 7. The degree of benefit to practical work performance resulted from the internal information use is less than by the use of external information. 8. The documents published more than five years ago are more used than the ones of less than five years, Korean and Japanese documents are used frequently and catalogues, patents and standards are used to a great extent. The documents are used differently in accordance with work departments.

• Journal of Animal Science and Technology
• /
• v.66 no.4
• /
• pp.792-806
• /
• 2024

This study aimed to confirm the applicability of the new nitrogen (N₂) gas stunning method in the broiler slaughtering process by comparing the meat and small intestine quality following different stunning methods (electrical, carbon dioxide (CO₂), N₂, and halal). Four treatments were compared: (i) electrical stunning (Elec), (ii) 80% CO₂ gas stunning (CO₂-gas), (iii) 98% N₂ gas stunning (N₂-gas), and (iv) the non-stunning method (halal). N₂ gas stunning (98%) and the halal method were conducted at the pilot plant abattoir of the national institute of animal science, Korea, and electrical and 80% CO₂ stunning were performed on the nearest commercial slaughter house. Meat pH_24h, color (lightness, redness and yellowness), proximate composition, water holding capacity (WHC), cooking loss, and Warner-Bratzler shear force (WBSF) were measured, and in the small intestine, pH_24h, color, thickness, and WBSF were measured. The Elec treatment showed high lightness, yellowness, and low redness in both meat and the small intestine, indicated by a pale color; the CO₂-gas treatment showed high redness, low lightness, and low yellowness, and the coloration of meat from the N₂-gas treatment was intermediate between Elec and CO₂-gas. For other quality traits, the N₂-gas showed good results and was between Elec and CO₂-gas. Additionally, severe stress (low pH in both meats), low WHC in meat, and cracked small intestine with numerous apertures were observed in the CO₂-gas, and pale colored hemorrhagic breast meat was found in the Elec. Therefore, in view of animal welfare and quality traits of meat and the small intestine, 98% N₂ gas can be considered in broiler stunning.

• Molecules and Cells
• /
• v.27 no.5
• /
• pp.525-531
• /
• 2009

We studied the effect of carbachol on pacemaker currents in cultured interstitial cells of Cajal (ICC) from the mouse small intestine by muscarinic stimulation using a whole cell patch clamp technique and $Ca^{2+}$-imaging. ICC generated periodic pacemaker potentials in the current-clamp mode and generated spontaneous inward pacemaker currents at a holding potential of -70 mV. Exposure to carbachol depolarized the membrane and produced tonic inward pacemaker currents with a decrease in the frequency and amplitude of the pacemaker currents. The effects of carbachol were blocked by 1-dimethyl-4-diphenylacetoxypiperidinium, a muscarinic $M_3$ receptor antagonist, but not by methotramine, a muscarinic $M_2$ receptor antagonist. Intracellular $GDP-{\beta}-S$ suppressed the carbachol-induced effects. Carbachol-induced effects were blocked by external $Na^+$-free solution and by flufenamic acid, a non-selective cation channel blocker, and in the presence of thapsigargin, a $Ca^{2+}$-ATPase inhibitor in the endoplasmic reticulum. However, carbachol still produced tonic inward pacemaker currents with the removal of external $Ca^{2+}$. In recording of intracellular $Ca^{2+}$ concentrations using fluo 3-AM dye, carbachol increased intracellular $Ca^{2+}$ concentrations with increasing of $Ca^{2+}$ oscillations. These results suggest that carbachol modulates the pacemaker activity of ICC through the activation of non-selective cation channels via muscarinic $M_3$ receptors by a G-protein dependent intracellular $Ca^{2+}$ release mechanism.

• The Korean Journal of Physiology and Pharmacology
• /
• v.2 no.2
• /
• pp.165-172
• /
• 1998

Under certain pathophysiological conditions, such as inflammation and ischemia, the concentration of H^+$ ion in the tissue surrounding neurons is changed. Variations in H^+$ concentration are known to alter the conduction and/of the gating properties of several types of ion channels. Several types of K^+$ channels are modulated by pH. In this study, the whole cell configuration of the patch clamp technique has been applied to the recording of the responses of change of external pH on the delayed rectifier K^+$ current of cultured DRG neurons of rat. Outward K^+$ currents were examined in DRG cells, and the Charybdotoxin and Mn^{2+}$ could eliminate Ca^{2+}-dependent$ K^+$ currents from outward K^+$ currents. This outward K^+$ current was activated around -60 mV by step depolarizing pulses from holding potential -70 mV. Outward K^+$ currents were decreased by low external pH. Activation and steady-state inactivation curve were shifted to the right by acidification, while there was small change by alkalization. These results suggest that H^+$ could be alter the sensory modality by changing and modifying voltage-dependent K^+$ currents, which participated in repolarization.

• International Commerce and Information Review
• /
• v.18 no.3
• /
• pp.131-151
• /
• 2016

The Korea-China FTA and China's huge development policy for its western regions could create a strategic opportunity for Korean Companies. This study suggests a strategy for expanding the domestic activities of Korean logistics Corporations and supporting the activities of Korean Companies operating in China. Using surveys of 32 Korean Logistics Corporations, important factors to consider when expanding into western China were analyzed. The results identified factors in the order of government, local markets, strategy, infrastructure, and finance and budget. The "development of Chinese Logistics specialists," "economic cooperation with the local governments of western China," and "holding investment Fairs and exhibitions" were important government-related factors. "Understanding entry permits and procedures for logistics corporations in China" and "understanding the logistics system of western China" were also shown to be important factors. Furthermore, governmental factors were suggested to be significant by large, medium-sized, and small businesses alike, while the factor of local markets was suggested to be significant by small-scale businesses.

• Journal of Korea Multimedia Society
• /
• v.10 no.1
• /
• pp.74-82
• /
• 2007

IPv6 is the internet protocol for next generation which can solve the problem of IPv4 protocol. Mobile IPv6 efficiently provides the mobility for mobile devices holding the properties of IPv6. iSCSI(Internet Small Computer System Interface) is a block-oriented storage access protocol that enables a user to recognize a remote storage as their own local block device through general TCP/IP networks. Since iSCSI uses a standard Ethernet switch and router for this kind of access, it can not only be applized to Ethernet technologies, but can also be used to create a storage networking system without any distance restrictions that can equally be applied to a wireless network environment. Accordingly, this paper presents an alternative approach to overcome the limited storage space of mobile devices based on the IPv6 iSCSI initiator driver which was originally designed for wired networks. Also, this paper describes about the implementation and performance analysis of mobile education service system using virtual storage devices in IPv6 wireless networks.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.10
• /
• pp.827-832
• /
• 2013

Heating wire cutting type separation mechanism has been widely used for cube satellite applications due to its design constraints such as small size of $10cm{\times}10cm{\times}10cm$ and light weight of less than 1kg. In addition, usage of pyro technic device is not allowed for cube satellite application. The conventional methods have some disadvantages of relatively small mechanical constraint force and the system complexity for the multi-deployable systems. In this paper, a separation nut type non-explosive separation mechanism has been proposed and investigated. The effectiveness of the design has been verified through the qualification tests of the mechanism.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.1053-1055
• /
• 2002

Recently CRT is getting large-sized, Flatness and High Fine Pitched in the meantime the raw material for shadow mask is in rapid progress of thinness, Low Thermal Expansion and high strength.Until now we have used AK(Aluminum Killed) & Invar(Fe-Ni alloy) materials for main raw material of shadow mask component. However recently Nb and Co addition and Nb+Co addition, which has advantage of Low Thermal Expansion and High Strength. has been developed as well as applying in mass production as CRT's trend has become more flat and fine pitch. Among of them, Co addition has been mass production as forming type (Flat CRT) with the beneficial effect of low thermal expansion & high strength for the first time. Since then Nb+Co addition has been used in mass production by the request of much higher strength of shadow mask component. In case of Nb addition, It's thermal expansion coefficient is a little lower than normal Invar and a little higher than Co addition, meanwhile Its Mechanical property is almost similar to Co Addition. The used samples of this experiment are 36%Ni + Fe, 32%Ni + 5%Co + Fe, 32%Ni + 5%Co + 0.3%Nb + Fe, 32%Ni + 0.3%Nb + Fe with heat treatment temperature of 600$^{\circ}C$, 650$^{\circ}C$, 700$^{\circ}C$, 750$^{\circ}C$, 800$^{\circ}C$, 850$^{\circ}C$, 900$^{\circ}C$ respectively under the condition of 15min holding time. After heat treatment, we have observed the change of mechanical property with addition of small elements through mechanical property investigation and metal structure observation as well as transition of thermal expansion coefficient by measuring of thermal expansion coefficient at 850$^{\circ}C$. In conclusion, 5%Co addition indicates that its thermal expansion coefficient is very similar under the condition of at 850$^{\circ}C$ for 15min 's heat treatment. From the experimental result it is suggested that Co addition is mostly suitable for Doming property and Nb addition is mostly suitable for Drop property.