• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.21 no.7
• /
• pp.609-614
• /
• 2011

The ship working environment of combat service support boat is much inferior to the ground working environment. For this reason, the crew of a combat service support boat suffer from an occupational disease such as hardness of hearing. Owing to its small size and low status, the improvement of its working and residential environment was occasionally ignored and its indoor noise was not fully investigated. In this study, for improving its residential environment indoor, the indoor noise of its shipboard compartments was analysed. These studies define the indoor noise level of combat service support boat is very high and some of indoor noise is exceeded the criteria for ship noise. Compared with marine police vessels, the indoor noise levels of marine police vessels are higher than the level of combat service support boat.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.342-345
• /
• 2005

This paper describes dynamics analysis of a small training boat and a new type of ship's autopilot not only to keep her course but also to reduce her roll motion. Firstly, statistical analysis through multi-variate auto regressive model is carried out using the real data collected from the sea trial on an actual small training boat Sazanami after the navigational system of the boat was upgraded. It is shown that the roll motion is strongly influenced by the rudder motion and it is suggested that there is a possibility of reducing the roll motion by controlling the rudder order properly. Based on this observation, a new type of ship's autopilot that takes the roll motion into account is designed using the muti-variate modern control theory. Lastly, digital simulations by white noise are carried out in order to evaluate the proposed system and a typical result is demonstrated. As results of simulations, the proposed autopilot had good performance compared with the original data.

• Journal of Ship and Ocean Technology
• /
• v.10 no.1
• /
• pp.1-9
• /
• 2006

The resistance reduction by an air lubrication effect of a large air cavity covering the hull bottom surface and the similarity relations involved have been investigated with a series of towing tank tests of three geometrically similar models. The test results of geometrically similar models have indicated that a large air cavity was formed beneath the bottom having a backward-facing step by artificially supplying air is effective for resistance reduction. The areas of air cavity and the required flow rates of air are directly related to the effective wetted surface area. The traditional extrapolation methods seem to be applicable to the estimation of the resistance in the tested range if corrections are made to account the changes in the frictional resistance caused by the changes in the effective wetted surface area. To investigate the effectiveness of air lubrication in improving the resistance performance of a practical ship, a small test boat having a backward-facing step under its bottom has been manufactured and speed trials in a river have been performed. Air has been supplied artificially into the downstream region of the bottom step to form a large air cavity covering the bottom surface. The results have confirmed the practical applicability of air lubrication for the resistance reduction of a small high-speed boat.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.6
• /
• pp.784-789
• /
• 2015

It was carried out a review of operating limit analysis for small high-speed boat by author. In general, a review of ship's seakeeping performance is performed in the step of ship design, but this study was carried out in the state of completion of boat. Motion performance of Pitch, Vertical and Lateral acceleration and Slamming were satisfied in some encounter angle but deck wetness was not satisfied in all it does the analysis. As a result, sea state rather than the speed and encounter angle of vessel have a greater effect on the seakeeping performance of target vessel. It seems to be due to the size of the target ship.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.7
• /
• pp.574-579
• /
• 2016

Grid systems used in previous studies were determined to be valid only if the length between the perpendiculars in a model ship was in the range of 6-8 m, and the maximum dynamic trim angle was smaller than $1^{\circ}$. The application of the grid system to a small fishing boat can create numerical instability because the dynamic trim of small boats is generally larger than $3^{\circ}$, and their Froude numbers are in the range of 0.3-0.8. In the present study, resistances of a small fishing boat were stably obtained by reducing the length between the center of buoyancy and the inlet boundary of the numerical domain, and by refining grid cells vertically in a region that would be swept by a free surface. The effective power of the small fishing boat was predicted based on the ITTC-1978 two-dimensional analysis. By using the results of previous towing tank tests, the coefficient of quasi-propulsive efficiency and the brake horsepower at a design draft were calculated.

• Journal of the Korean Geographical Society
• /
• v.24
• /
• pp.1-18
• /
• 1981

본 연구는 미국에서 boat공업의 중심지 중의 하나인 Seattle의 boat 공업의 입지와 그 변화를 고찰하므로서 소기업의 입지를 구명하려고 하였다. 본 연구에서는 먼저 Seattle에서 소규모 boat제조업체가 가장 많이 집중한 Washington호와 Shilshole 만간의 운하지역을 연구지역으로 선정하려 이 지역내에 입지하고 있는 boat 제조업체의 기업주와 interview한 결과를 기본자료로 이용하였다. 이상에서 얻어진 결과는 다음과 같았다. 연구지역의 소규모 boat 공업은 boat제조에 흥미와 능력을 가진 기업가들이 boat 공업에 유리한 Seattle의 환경의 영향을 받아 그들의 기업을 그들의 오랜 거주 지역에서 시작하므로서 발생하게 되었다. 그러나 담수를 지향하는 이 공업의 입지상의 특색, 원료공급처와 제품판매처의 위치, 주위의 지형 그리고 지방정부의 정책에 기인하여 이 공업은 Chittenden Locks와 Portage 만간의 운하지역에 그 입지가 국한되었다. 다시 이 지역내에서는 주위의 지형과 토지이용, 기업의 재정적인 능력 때문에 이 운하지역에 연해있는 기존공장 혹은 건물을 이용하여 입지하게 되었다. 입지후에 이 공업은 원료공급처와 제품판매처와의 강한 linkage를 형성하고 있다. 더구나 원료공급처의 희소성에 기인한 공간적 독점과 소비자 및 제품의 특성 때문에 연구지역의 대부분의 소규모 boat 제조업체는 바로 근처에 있는 원료공급처 및 소비자와 긴밀한 contact를 하고 있고 이러한 contact를 통하여 그들의 입지를 존속시키고 있다. 한편 Seattle 이 가지고 있는 boat 공업에 유리한 기업환경의 덕택으로 이들 소규모 boat 제조업체들은 수요의 계절적인 변동에서 초래되는 노동력의 공급 때문에 곤란을 받을 뿐 장기적인 불황에 직면한 적은 없다. 이리하여 이들 업체들은 이러한 계절적인 변동에 대처하기 위해 생산 input 의 조절, 주위의 기존공장이나 건물의 병합을 통한 연속적인 확장 혹은 그들의 action space 내에 있는 기존공장이나 건물을 이용한 이동등과 같은 입지변화를 보여왔을 뿐이다. 이리하여 연구지역의 소규모 boat공업은 Seattle의 경제 system 내의 주요 subsystem의 하나로서 활발히 움직이고 있다. 그러나 만약 기업의 외부환경에서 초래되는 stress, 즉 주민의 소득저하, 타 recreation 산업이 쇠퇴하게 되면 이 공업 또한 쇠퇴될 것이다. 요컨대 담수 지향성과 관련된 입지상의 특색을 제외하고는 연구지역의 소규모 boat 공업은 타 소규모 공업과 동일한 입지상의 특색을 가지고 있다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.3
• /
• pp.1045-1053
• /
• 2013

Boat or yacht hull has been built mainly by FRP composite materials. FRP boat hull manufacturing begins to be restricted after the year 2000 under international regulation on ocean environment safety. The alternative of FRP has been proposed by many boat builders and high strength aluminium is considered as its standard material. But high strength aluminium is very expensive as boat hull material. In this study, boat hull is considered to be built by high density polyethylene and its structural strength is estimated by longitudinal strength test method on small craft. Tensile strength of polyethylene boat hull material is higher than that of FRP boat hull material. But safety factor of polyethylene boat hull is more than that of FRP boat hull. These study results indicate structural integrity and quality control of polyethylene boat is better than those of FRP boat.

• Journal of the Society of Naval Architects of Korea
• /
• v.49 no.2
• /
• pp.182-188
• /
• 2012

The hull form design technique for high speed power boat based on the parametric design method is presented in this paper. While the design methods of conventional vessels that are currently in use have been well developed in various aspects from existing database. However, an easy and simple design program for high speed power boats needs to be provided for the relatively small boat builders who are in lack of experience and skilled manpower. This paper presents a parametric design technique which is aimed to provide an easier creation of a new model by inputting several parameters, such as angles and lengths, which correlate with hydrodynamics characteristic for high speed boats. The paper also introduces the prototype program developed to design power boat with parametric design technique.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.43 no.1
• /
• pp.62-70
• /
• 2007

Marine casualties of vessel are serious problems on social and national aspects, because it results in sacrifice of lives, a great lose of properties and marine pollution. According to recent statistics of marine casualties of vessel, fishing boats are more likely to be ended in the casualty, and especially, small fishing boats cause much more accidents than any other big vessels. Most of marine casualties were caused by the human factors such as poor watch keeping, inadequate manoeuvering and negligent action for engine, etc. This study is intended to provide navigator of small fishing boat with a specific information of necessary to assist both the manoeuvering and the avoidance of capsizing. The manoeuvering characteristics of ship can be adequately judged by the results of typical ship trials manoeuvres. For this purpose, the author measured the roll responses of a small fishing boat in waves using the real sea experimental measuring system, and analyzed the experimental data by the statistical and spectral analyzing methods to get the characteristics of the roll motion responses of the small boat through the wave directions and the ship's speed.

• Journal of Navigation and Port Research
• /
• v.34 no.8
• /
• pp.623-628
• /
• 2010

High speed marine vehicle, such as semi-planing, planing craft have been developed recently. These ships paid attention to the resistance characteristics, especially in high speed region. Model test method is divided to two equipment greatly, first 'Towing tank', second 'C.W.C.'. It is difficult to estimate a resistance characteristics for high speed boat. because these are made for low speed ship. This paper suggests a new model test method and system. This is real sea model test and it's comprised of eight part. Firstly, This method is tested at C.W.C that is possible to using in real sea model tes using low speed boat modelt. And then, Real sea model test and CFD calculation are performed and compared with tow way used high speed boat model. It can be a good way to estimate a performance for high speed boat.