• The Journal of Fisheries Business Administration
• /
• v.35 no.2
• /
• pp.1-29
• /
• 2004

This paper aims to understand the points which the Board of Directors of the National Federation of Fisheries Cooperatives System has proposed, and to find some improvement. This Fisheries Cooperatives previously had a single board system operating two small board rooms which became independent within the two sectors of credit and .provision in addition to the existing board of directors. This is a very unique board of directors system which is not found in cooperatives in our country nor in the business world. This change of the board of directors of the Fisheries Cooperatives is ascribed to the reorganization of the system into a completely independent division system, which operates business separately based on each sector as opposed to the previous multiple cooperatives system. However, a plural board of directors system does contribute to the improvement of managerial efficiency by strengthening the self-control of each independent business section, but deepens conflicts between its internal organizations, and brings about a reverse function which might deteriorate both the controlling power of a systematic organization and the coordinating power between sectors. This paper made an analysis of acceptors' attitudes toward the board of directors of the fisheries cooperatives system by regulating all the staff directly related to the operation of the board of directors of the fisheries cooperatives system as a group of acceptors and by selecting one hundred and fifty persons among the staff as a sample. The inquiry into acceptors' attitudes was made using questionaries, and the data for this investigation was processed and analyzed using a statistical method. The contents of this paper are composed of I. an introduction, II. the findings of the questionary investigation, III. the overall opinion for the improvement of the board of directors system, and IV. a summary and conclusion.

• Journal of the Korean housing association
• /
• v.23 no.5
• /
• pp.95-102
• /
• 2012

We studied in order to find out suitable amounts of board by visual effects to establish indoor boards and human psychological effects by several board designs. Thirty students of C university were tested in constant temperature/humidity room and interviewed after tests. The experimental visual images were projected from 54' TV. As a result, the board length that showed high preference and satisfaction was the 90cm both horizontal and vertical direction. We found that vertical board gave an impression of a linear and narrow shape and the horizontal board gave wide space and cool feeling from psychological analytical study. The factors affecting satisfaction in horizontal direction were refreshing, intimacy, beauty, area, splendor and those in vertical direction were a sense of security, beauty, texture, intimacy, continuity, extensity, natural feeling. We got 5 factors from the result of factor analysis in order to get psychological factor axis. Those were pleasantness, artificiality, openness, dynamics, refinement. By multiple regression analysis, the factor pleasantness had the highest impact on visual satisfaction on scenary. The study on psychological factor difference by analysis of variance showed that psychologically feeling amount about pleasantness, artificiality, dynamics, refinement, and openness had statistically meaningful difference despite of board direction. We found that the 90cm had a tendency as a changing point leading image change by the investigative analysis of board direction based on factor points.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.1-4
• /
• 2008

Fuel cells have the potential of providing several times higher energy storage densities than those possible using current state-of-the-art lithium-ion batteries, but current energy density of fuel cell system is not better than that of lithium-ion batteries. To achieve the high energy density, volume and weight of fuel cell system need to be reduced by miniaturizing system components such as stack, fuel tank, and balance-of-plant. In this paper, the thin flexible PCB (Printed circuit board) is used as a current collector to reduce the stack volume. Two end plates are made from light weight aluminum alloy plate. The plate surface is wholly oxidized through the anodizing treatment for electrical insulation. The opening rate of cathode plate hole is optimized through unit cell performance measurement of various opening rates. The performances are measured at room temperature and ambient pressure condition without any repulsive air supply. The active area of MEA is 10.08 $cm^2$ and active area per a unit cell is 1.68 $cm^2$. The peak power density is about 210 mW/$cm^2$ and the air-breathing planar stack of 2 Wis achieved as a small volume of 18 cc.

• Korean Journal of Materials Research
• /
• v.11 no.10
• /
• pp.841-845
• /
• 2001

The steam generator tubes of power plant damaged by sliding wear due to flow-induced motion of foreign object. Amount of wear have been predicted by Achard's wear equation until now. However, there are large error and low reliability, because this equation regards wear coefficient(k) as constant. The sliding wears tests have been performed at room temperature to examine parameters of wear (wear distance, contact stress). The steam generator tube material for wear test is used Inconel 600 and foreign object material is used 304 austenite stainless steel. The sliding wear tests show that the amount of wear is not linearly proportional to the wear distance(for 374 austenite stainless steel). According to experimental result, wear coefficient is not constant k but function k(s) of wear distance. The newly modified wear predictive equation V=k(s)F have small error and high reliability.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.397-400
• /
• 2007

Indoor air-conditioning system(IAS) using wireless sensor network serves to reduce the amount of pollution entering the room from outside and also the pollution that is generated indoor. Small-size and lower power wireless sensor node and sensor interface board was designed for indoor air-conditioning system in buildings of offices and industrial establishments. Many sensor nodes forms Ad-hoc network topology using simple forwarding routing to transmit polluting gas concentration data from different rooms to the indoor air-conditioning system. Sensor node analyzes pollution concentration in the each room and air-conditioning system performs to air-distribution and air-inhalation according to room's pollution by regulating the fan of indoor air-conditioning system. To reduce power consumption electrochemical gas sensor was used in the design. Thus the designed system can optimize state of indoor environment. Graphic user interface displays node sate, gas concentration and temperature of each room.

• Current Research on Agriculture and Life Sciences
• /
• v.6
• /
• pp.121-127
• /
• 1988

Ramyon(deep fat fried instant noodle with palm oil) preserved in sunlight, room temp. ($20{\pm}5^{\circ}C$), incubator ($30{\pm}2^{\circ}C$) and corrugated fiber board box to investigate the oxidative changes of the Ramyon lipids. In the study, changes in acid value, peroxide value, carbonyl value, TBA value, fatty acid composition, iodine value and panel test were determined with the lipids extracted from the Ramyon samples in intervals for a period of 20 weeks. Acid value, peroxide value, carbonyl value and TBA value of the Ramyon lipid were increased slightly during the storage in aluminum foil package in the corrugated fiber board box in the dark room. They did not appear the oxidative rancid odor at the end of 20 weeks storage. Acid value, peroxide value, carbonyl value and TBA value of the samples under room temp., incubator slightly during storage, while a sharp increase of those values were noticed with the samples of sunlight. Especially, the TBA value of the Ramyon lipid under sunlight markedly increased within 14 weeks and then decreased. Oxidative rancid odor appeared at the end of 10 weeks storage under sunlight, while it took 18 weeks with the sample stored under room temp. and incubator. During the storage under incubator and sunlight for 18 weeks, the content of oleic, linoleic acid decreased, while palmitic and stearic acid increased. However, only small changes were noticed in iodine value of the samples.

• Journal of architectural history
• /
• v.17 no.2
• /
• pp.27-45
• /
• 2008

This study examines the details and characteristics of prizewinning plans of Cho-Sun housing plan competition promoted by Daily Cho-Sun Company during Japanese colonial period. The main features of Cho-Sun housing plan competition were that the competition held with an application of popular newspaper readers and a judging committee was composed of only Korean architects, especially Park, Gil-Ryong as the president of the board of examiners. Cho-Sun housing plan competition put ideological factors for the improvement of living as like advancing to the cultured(modem) life, respecting for family life, respecting for privacy of family members and so on. First of all, the competition suggested the direction of the improvement of dwelling spaces which focused on making harmonious home life. This study found common characteristics of prizewinning plans of Cho-Sun housing plan competition as the result. First, Cho-Sun housing plan competition introduced a centralized house plan as a model of the improvement of small-sized houses. Second, architectural orders of western or Japanese style mingled with ones of korean traditional style in prizewinning plans as entrance hall, western style reception room(parlour), maid's room, bathroom for example. And a manner of seating using chairs was brought into the style of living which would be assumed in the prizewinning plans. Third, traditional way of composing dwelling spaces was maintained, receiving the characteristics of dwelling spaces of japanese style simultaneously, which central corridor was put at the heart of house for improving arrangement of rooms and flow lines. Fourth, lavatory and bathroom were placed inside of the house.

• Journal of Sensor Science and Technology
• /
• v.17 no.3
• /
• pp.168-177
• /
• 2008

An indoor environmental monitoring system using IEEE 802.15.4 based wireless sensor network is proposed to monitor the amount of pollutant entering to the room from outside and also the amount of pollutant that is generated in indoor by the building materials itself or human activities. Small-size, low-power wireless sensor node and low power electrochemical sensor board is designed to measure the condition of indoor environment in buildings such as home, offices, commercial premises and schools. In this paper, two query models, the broadcasting query protocol and flooding query protocol, were designed and programmed as a query-based routing protocol in wireless sensor network for an environment monitoring system. The flooding query routing protocol in environment monitoring is very effective as a power saving routing protocol and reliable data transmission between sensor nodes.

• Korean Journal of Construction Engineering and Management
• /
• v.23 no.3
• /
• pp.36-44
• /
• 2022

This study analyzed Corporate Social Responsibility (CSR hereafter) of construction companies, especially focusing on small-medium companies. Surveys on construction companies' CSR activities and intensive interview with experts were executed to analyze and draw some implications. The empirical results shows that most of construction companies feel keenly necessity of CSR. The level of small-medium companies' awareness is lower than that of large companies'. CEO and board members of small-medium companies are less concerned about CSR yet. Carrying CSR activities co-working with NGO is preferred because of expertise and network. This study also suggests future strategy for CSR in the construction industry, focusing on small-medium companies. First of all it is necessary for small-medium companies to enhance the level of awareness and encourage participation in CSR. Second, it is required to strengthen relation with NGO and share information for CSR. Third, it is really significant to strengthen budget support and secure personnel to activate CSR. The systematic support by gevernment is also important. Lastly, it is essential to mount a publicity campaign and develop various CSR program. The role of 'Construction Industry Foundation for Social Responsibility' is emphasized because small-medium companies have very little room for CSR.

• Journal of the Economic Geographical Society of Korea
• /
• v.1 no.1
• /
• pp.113-135
• /
• 1998

There have been several research methodologies to measure the impacts of tourism development on the regional economy, which include input-output analysis, income multiplier analysis, labor creation effect analysis, etc. Most of these are based on regional economic indices using secondary data for medium to large regional units. This study tests the possibility of adopting tourist money now analysis, which encompasses a series of money flows beginning with tourists'payment for room, board and shopping, followed by tourist companies'expenditure for material and service purchase, wage, utilities, rent, tax and so forth, and by tourism workers'expenses for living and savings. This method makes it possible to reveal the amount and geographical extent of tourist money flow and draws some meaningful regional economic figures. Case studies of three torist developing areas show that it is utilized for impact studies for small scale areas.