• Journal of Mechanical Science and Technology
• /
• 제19권spc1호
• /
• pp.473-480
• /
• 2005

A three axes marine satellite antenna has been developed. As a design step, a CAD model for the antenna has been created according to the design requirements. Kinematic analyses are carried out to insure design specification and to check collision detection of the CAD model. Marine satellite antennas experience base motions, and a relevant control system should control the three antenna axis to point to the satellites accurately. A sensor fusion algorithm and a PIDA (Proportional, Integral, Derivative, Acceleration) control algorithm are designed and implemented to control the yaw, level, and cross-level angle of a small size satellite marine antenna. Antenna stabilization control experiments are performed using a test simulator which gives the antenna base motions. Experimental results show small pointing errors, which is less than 0.2 degree for the level, cross-level, and yaw axis.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2018년도 추계학술대회
• /
• pp.526-528
• /
• 2018

본 논문은 Wi-Fi 환경내 스마트기기의 무선전력전송을 위한 유연한 소형 다이폴 안테나를 제안한다. 제안된 안테나는 중앙에 분할고리공진기를 가진 다이폴 안테나 구조이며, 크기가 32mm인 소형 다이폴 안테나이다. 분할고리공진기 다이폴 안테나는 동일 크기의 다이폴 안테나에 비해 약 20% 파장을 줄이는 결과를 보였다.

• 한국정보통신학회논문지
• /
• 제21권3호
• /
• pp.530-536
• /
• 2017

해양 산업과 서비스업의 성장으로 인하여 소형 선박의 사고가 증가하고 있다. 이러한 문제를 해결하기 위하여 소형 선박에 레이더 의무 장착을 시행하고 있다. 하지만 기존의 펄스 레이더를 소형 선박에 설치하면 유지보수 비용 및 높은 송신 전력등의 문제들이 발생한다. 본 연구에서는 전자적으로 빔을 회전하는 위상배열안테나를 이용하여 상기문제를 해결가능한 선박용 고정형 레이더에 적용 가능한 안테나를 제작하여 시험하였다. 그 결과 정면에 대한 빔 폭은 $5^{\circ}$내외로 레이더에 적용에 대한 가능성을 볼 수 있었다.

• 한국전자파학회논문지
• /
• 제8권3호
• /
• pp.297-309
• /
• 1997

In this paper, A small inverted F Antenna with 1.9 GHz frequency band is studied theoretically, characterized by numerical analysis with computer and fabricated in order to use in the proximity sensor. Because of small space for antenna in proximity sensor, .lambda. /4 length plate and dielectric material are used to reduce the size of antenna and broaden the bandwidth. Finite ground body's affection is compensated by dielectric top loading effect which strengthen front direction power about 4 dB. Fabricated antenna is measured and the result is that resonant frequency is 1900.05 MHz, VSWR is 1.02, bandwidth is 194 MHz and input impedance is 50.45-j0.108 [ .ohm. ].

• ETRI Journal
• /
• 제39권3호
• /
• pp.383-389
• /
• 2017

A small dual-polarized base station antenna with a simple isolation patch is presented. A high isolation is achieved when using a shorted metallic isolation patch. The experimental results indicate that the measured impedance bandwidth of the proposed antenna is 1.72 GHz to 1.89 GHz for small cell systems and that the isolation is more than 30 dB. The proposed antenna exhibits good radiation patterns with a peak gain of 8 dBi.

• Journal of electromagnetic engineering and science
• /
• 제17권4호
• /
• pp.228-232
• /
• 2017

The radiation properties and fabrication precautions of a 3D printed, electrically small folded spherical meander wire monopole antenna are investigated. The antenna is self-resonant and shows sufficiently high radiation efficiency at an electrical size ka of 0.4, with the radiation quality factor Q approaching the lower physical bound. In antenna fabrication, the possible structural deformation due to gravity is examined before the antenna frame is 3D-printed. The required conductivity is achieved by multiple manual paintings of a silver paste. The radiation efficiency and pattern show very good agreement with the computed expectations, whereas the resonant frequency deviates by 11.8%. The method to minimize such a fabrication error when using 3D printing technology for wire antennas is discussed.

• Journal of electromagnetic engineering and science
• /
• 제18권2호
• /
• pp.129-135
• /
• 2018

This paper proposes a design of small controlled reception pattern antenna (CRPA) arrays using circular microstrip loops with frequency-insensitive characteristics. The proposed array consists of seven identical upper and lower circular loops that are electromagnetically coupled, which results in a frequency-insensitive behavior. To demonstrate the feasibility of the proposed feeding mechanism, the proposed array is fabricated, and its antenna characteristics are measured in a full-anechoic chamber. The operating principle of the proposed feeding mechanism is then interpreted using an equivalent circuit model, and the effectiveness of the circular loop shape is demonstrated by calculating near electromagnetic fields in proximity to the radiator. The results confirm that the proposed feeding mechanism is suitable to have frequency-insensitive behavior and induces strong electric and magnetic field strengths for higher radiation gain in extremely small antenna arrays.

• 한국전자파학회논문지
• /
• 제15권11호
• /
• pp.1051-1061
• /
• 2004

본 논문에서는 반원형 및 반타원형 디스크가 급전점에 수직으로 로딩된 단순한 광대역 모노폴 안테나 구조에 급전점에는 추가적인 공진 구조를, 수직 모노폴 안테나의 끝단에는 수평으로 추가적인 소형 디스크가 로딩되는 초광대역 안테나의 특성에 관하여 시뮬레이션과 측정이 수행되었다. 설계된 초광대역 송신용 안테나로부터 가우시안 펄스의 전달 특성에 관하여 살펴보며 제안된 안테나의 수평방향을 단면으로 보았을 경우의 복사패턴이 등방향성 응답을 가짐을 알 수 있었다. 더욱이, 측정 및 시뮬레이션 결과로부터 소형이면서 광대역 특성을 보임을 알 수 있다. 제안된 수평방향의 소형 디스크가 장착된 반원형 디스크 모노폴 안테나의 측정결과로부터, 크기와 전기적인 성능 측면에서 살펴보았을 때 제안된 구조가 단순히 원형 디스크가 수직으로 로딩된 모노폴 안테나에 비해 견줄만 함을 알 수 있었다. 특히 본 논문을 통하여 제작된 안테나는 PCB를 이용한 프린팅 안테나에서 자주 발생되는 표면파 손실 및 유전체 손실과 같은 현상이 발생되지 않으므로 Return Loss의 성능이 곧 복사되는 효율과 밀접한 관계가 있다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.470-473
• /
• 2004

This paper presents conducted emission noise measurement from electronic equipment in frequency range of 1 MHz up to 30 MHz by small loop antenna. Small loop antenna measurement method can measure common-mode (CM) and differential-mode (DM) component of the noise on a pair of power line at the same time. The CM and DM can be measured separately. The theory of this measurement method is introduced and analyzed. The measured results were compared with the conventional measurement by Line Impedance Stabilization Network (LISN) and result a good trend between those methods.

• 산업기술연구
• /
• 제22권B호
• /
• pp.155-161
• /
• 2002

As the wireless communications are gradually developed, the higher frequency is demanded and the smaller the size of antenna shall be reduced by the wavelength of the operating frequency. However, the smaller the size of antenna becomes, the less the gain is obtained according to the frequency, so that a new attempt such as an array antenna has been examined to improve the characteristics. Also, for the convenience of communication, the omni-directional property is required. In this paper, two antennas system which is aligned in cross direction in tested and analyzed. The main scope is focused to get an appropriated distance between the two small antennas to get better properties. There are various ways of array arrangement, but in this study, it should be placed on the same PCB for easy implementation and the direction of each antenna are aligned to be a cross($90^{\circ}$) position. The study is carried out by comparing the radiation patterns mainly, and the theoretical expectation and the computer simulation are also executed. The final model is the folded IF-antennas system printed on PCB and the ideal dipole-antenna arrangement in also test to verify the possibility of our implementation. And it is finally proved by measuring experiments.