• The Korean Journal of Ceramics
• /
• v.1 no.4
• /
• pp.179-184
• /
• 1995

Sodium superionic conductor (NASICON) compounds were prepared. The effects of sintering temperature and cooling rate on the formation and the distribution of crystalline NASICON and $ZrO_3$ second phase were investigated. In the von Alpen-type composition, the $ZrO_2$ second phase is in thermal equilibrium with the crystalline NASICON above $1320^{\circ}C$, but when cooled through 1260-$1320^{\circ}C$ crystalline NASICON was formed by reaction between $ZrO_2$ and liquid phase. Very slow cooling ($1^{\circ}C$/hr) to $1260^{\circ}C$ from sintering temperature decreased the amount of sodium which prevents the formation of the crystalline NASICON resulted high number of $ZrO_2$ grains near the surface of some sintered bodies. Maximum electrical conductivity of 0.200 ohm-1cm-1 was obtained at $300^{\circ}C$ for well-sintered samples with little $ZrO_3$. On the other hand, low conductivities were obtained for rapid-cooled samples which have less dense microstructure.

• Progress in Superconductivity
• /
• v.4 no.1
• /
• pp.94-98
• /
• 2002

Two kinds of multifilament Bi-2223／Ag tapes, which are different in the precursor calcination temperatures, were heat treated for different time (12, 20, 30, 50, 70, or 100 h) firstly to obtain varied B2223 contents, and then followed by the same pressing and sintering cycles. The relation of the 2223 phase contents after the first sintering and the transport property of the fully processed tapes was studied. The results show that 75-80% 2223 phase formed in tapes before the first cold pressing is beneficial to get a high $I_{c}$ in the final tapes. Compensating the total heat treatment time of the tapes first sintered for 20 h to the same length as that first sintered for 50 h in the subsequent sintering stages, different $I_{c}$ enhancements were observed in these two tapes. No improvement on $I_{c}$ was found in the tape made from the powder calcined at higher temperature, whereas for the tape prepared with the lower temperature calcined powder, the $I_{c}$ was increased to the same level as that first sintered for 50 h. The 2223 contents before the intermediate mechanical work is related to the residual reactants, especially to the liquid phase, which is of vital importance to the phase conversion and healing microcracks, meanwhile, to the size and distribution of the non-superconducting secondary phases. The lower temperature calcined powder resulted in slow formation of 2223 phase, but also provided more reactants and liquid phase for the further phase conversion, as a consequence, for the Improvement of $I_{c}$. c/.

• International Journal of Vascular Biomedical Engineering
• /
• v.1 no.1
• /
• pp.3-12
• /
• 2003

Ultrasonic pulsed Doppler velocimetry has become a standard international method of classifying carotid disease. Because the measured angle adjusted velocity increases as the Doppler angle increases, examinations should be performed at a convenient standard Doppler examination angle. An angle of 60 degrees is achievable throughout most examinations. Multiple Doppler viewing angles allow the acquisition of velocity vectors during the cardiac cycle, revealing the complex velocity patterns. Ultrasonic velocimetry (whether Doppler or time domain) is based on changes in the phase of the ultrasound echo. Other examinations can be done based on the echo phase. Slow motions of organs such as the brain can be used to monitor changes in edema. Measurements of tissue strain due to the pulsatile filling of the arterioles. This plethysmographic imaging method can display differences in tissue perfusion because of different tissue types and changes in autonomic activity.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.6
• /
• pp.719-727
• /
• 1999

A robust position control method of the BLDC motor using a new sliding mode control strategy is presented. The main property of variable structure system(VSS) is that the system response is robust and insensitive to parameter variations and external disturbances in the sliding mode. When using the conventional VSS, generally the reaching phase problem occurs, which cause the system response to be sensitive to parameter variations and external disturbances. Furthermore, the speed of response is relatively slow because the swithching surface is a linear function. In order to overcome these problems, VSS with nonlinear sliding surface eliminating reaching phase is proposed. The validity of the proposed scheme is shown by results of simulations of simulations and experiments for the BLDC motor with variable load.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.4
• /
• pp.324-331
• /
• 2004

Particle Image Velocimetry (PIV) measurements have been carried out to investigate the pulsatile flow characteristics in a triangular grooved channel. The results showed that a vortex was generated at the tip of the groove and flowed into the groove rotating inside during the acceleration phase of the main stream promoting the mixing of the fluid. Then, at the deceleration phase of the main stream, the vortex entrained fluid from the relatively slow moving main stream to grow bigger than the groove size. Finally the vortex was ejected to the main stream carrying the fluid away from the groove, resulting in the enhancement of mixing between the stagnant fluid in the groove and the main stream in the channel. It was found that the fluid mixing enhancement is maximized when the pulsatile period is the same as the time duration which the vortex takes to grow larger enough to fill the groove and to be ejected to the main stream.

• Proceedings of the Korean Information Science Society Conference
• /
• 2000.04a
• /
• pp.271-273
• /
• 2000

본 논문에서는 TCP 수신자가 지연 ACK 옵션(Delayed ACK Option)을 사용할 경우에 TCP 송신자에게 발생하는 성능 저하요인들을 분석하고 다음과 같은 해결책을 제시하였다. 먼저, 느린 시작 구간(Slow Start phase) 처음에 생기는 ACK 타임아웃은 큰 초기 윈도우(large initial window)또는 1-bit 마킹 기법을 통해 해결할 수 있다. 그리고, 느린 시작 구간과 혼잡 회피 구간(Congestion Avoidance phase)에서 혼잡 윈도우(cwnd)가 천천히 증가하는 문제는 적절히 바이트 카운팅 기법을 사용함으로써 해결할 수 있다. 마지막으로, 송신자가 버스트(burst)한 데이터를 네트웍에 발생시키는 문제는 트래픽을 평활(pacing)함으로써 해결할 수 있다. 또한 본 연구에서는 분석적 모델링을 통하여 TCP가 보내는 평균 전송률을 구하였으며 이 결과는 TCP에 친화한 전송률 기반 전송방법(TCP Friendly Rate Based Control)에 응용될 수 있을 것이다. 그리고 시뮬레이션을 통해서 제시한 방법의 성능이 향상됨을 확인하였다.

• Journal of Biosystems Engineering
• /
• v.40 no.2
• /
• pp.102-109
• /
• 2015

Purpose: Slow manual harvesting of rain-fed chickpeas cultivated in fallow fields in developing countries have encouraged the design of a mechanical harvester. Methods: A tractor-pulled harvester was built, in which a modified stripper header detached pods from an anchored plant and a chain conveyor transferred material. The stripper harvester was redesigned to use: 1) the maneuverability of tractor-mounted frames, 2) the adaptability of floating headers, and 3) the flexibility of pneumatic conveyors. Results: A mobile vacuum conveyor, which was an innovator open system, was designed for the dilute phase transferring mode for both grain and material other than grain. A centrifugal fan transferred harvested material to a cyclone separator that settled harvested material in a grain tank 1 m high. The machine at the spot work rate of $0.42ha{\cdot}h^{-1}$ harvested chickpea pods equal to the output of 16.6 farm laborers. Conclusion: The low cost and reasonable projected purchase price are the advantages of the concept. Additionally, the shattering loss reduction confirms the feasibility of the prototype chickpea harvester for commercialization.

• Journal of Magnetics
• /
• v.18 no.2
• /
• pp.183-187
• /
• 2013

Two concurrent signals of the pulse wave measured from both hands' radial artery in un-pressurization condition using the prototype model of two clip-type pulsimeters with a permanent magnet and Hall device are investigated. The phase differences of two pulse waves from 22 subjects have some distinct points according to the handedness. Thus, the propagation of the pulse wave calculated from phase difference is both fast and slow to each other. It is confirmed that this phenomenon comes from the difference of blood vessel hardness between right- and left-hand of each subject rather than a quantity of muscle.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.1
• /
• pp.69.1-69.1
• /
• 2011

The multi-band receiving feed which is one of the unique characteristics of the Korean VLBI Network (KVN) system compare to the other VLBI network enables to study precise astrometry with a source frequency phase referencing (SFPR) techniques. SFPR almost perfectly compensates the dominant non-dispersive tropospheric fluctuations by observing sources with multi-frequency simultaneously, and it also corrects the dispersive ionospheric fluctuations by adding a slow source-switching observation. In this talk, I will present the results from the KVN astrometric observations with SFPR and the achievable astrometric accuracy in KVN will be discussed.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.11a
• /
• pp.11.1-11.1
• /
• 2009

Ternary Al2O3.ZrO2.Y2O3 samples with a eutecticcomposition were prepared by slow cooling. The microstructural evolution wasobserved with X-ray diffraction (XRD), scanning electron microscopy (SEM). TheSEM observation of the ternary samples agreed with the XRD with a completion ofcrystallisation by slow cooling. The target materials commonly have 'cantaloupe skin' microstructures as shown inthe previous studies by Han et al. The nanocomposite may have experienceddifferent cooling rates with two different microstructures, near the surfacehaving experienced optimal conditions for the eutectic reaction during theircooling and thus formed the eutectic microstructure, near the centre havingexperienced a slower cooling rate. The crystallised eutectic ternary Al2O3.ZrO2.Y2O3 system had three different phaseswith a 3Y2O3. 5Al2O3 (yttrium.aluminiumgarnet phase), an alumina phase formed by the eutectic reaction, and a solidsolution of ZrO2 and Y2O3.