• 한국정밀공학회지
• /
• 제20권9호
• /
• pp.109-117
• /
• 2003

With development of high advanced technologies and skills, micro machining techniques also are being more functional and smaller. Some of the recently developed micro machining technologies are micro drilling, micro EDM, WEDG, LBM, micro milling, micro UVM etc. In these micro machining techniques, Micro -EDM is generally used for machining micro holes, pockets, and micro structures in difficult-cut-materials. For machining micro structures, first of all, tool electrode should be fabricated by WEDG process. In micro-EDM, parameters such as peak current, pulse width, duration time are very important to fabricate the tool electrode and micro structures. Developed experimental equipments are composed of RLC circuit with PWM. In this paper, using developed micro EDM machine, the characteristics of micro electro discharge machining are investigated at micro holes, slot, and pocket machining etc. Also the trends of tool wear are investigated in case of hole and slot machining.

• 한국항공우주학회지
• /
• 제31권9호
• /
• pp.26-31
• /
• 2003

노후 항공기는 일반적으로 다중손상(MSD)이라고 하는 폭넓게 분포된 피로손상을 내포하고 있다. 2024-T3 알루미늄합금과 같은 연성재료에 있어서 다중손상은 전통적인 파괴역학에서 예측할 수 있는 것보다 낮은 운용수명을 예측하게 만드는 것으로 알려져 있다. 본 논문에서는 다중손상을 갖는 평판 구조물을 모델링한 Fastener Hole을 갖는 2024-T3 알루미늄합금 판재로 제작된 Hole/Slot type M(T) 시편에 예입압입을 적용한 후 피로시험을 수행하여 피로균열 성장지연에 의한 운용수명 증가에 대한 효과를 연구하였다. 예비압입을 적용한 시편은 파단에 이르는 사이클수가 최소 10배에서 최대 40배까지 증가하였으며, 일정진폭 하중의 최대값을 증가시킴에 따라서 그 효과가 감소함을 보여주었다. 또한, 압입에 의한 균열성장지연 메커니즘은 균열진전경로가 압입자국에 들어서면서 균열성장률이 감소하기 시작하며 압입자국의 중심을 지나면서 최소균열성장률 상태로 일정한 시간동안 균열성장이 정체됨으로써 피로수명이 연장됨을 밝혔다.

• Wind and Structures
• /
• 제38권3호
• /
• pp.203-214
• /
• 2024

Large-span cantilevered roof represents a unique type of structure that is vulnerable to wind loads. Inspired by the need to maximumly reducing the rooftop wind loads, this study examined the feasibility of positioning vented slots on the leading edge, and the effectiveness of such aerodynamic mitigation measures are assessed via both physical and numerical simulations. The reliability of numerical simulation was evaluated via comparisons with the wind tunnel tests. The results indicated that, the variation of venting hole arrangement can cause significant change in the rooftop wind load characteristics. For the cases involved in this study, the maximum reduction of mean and peak wind suction coefficients are found to be 9% and 8% as compared to the original circular slot without venting holes. In addition, the effect of slot shape is also evident. It was shown that the triangular shaped slot tends to increase the wind suction near the leading edge, whereas the hexagonal and octagonal shaped slots are found to decrease the wind suction. In particular, with the installation of octagonal shaped slot, the maximum reduction of wind suction coefficients near the leading edge reaches up to 31% as compared to the circular shaped slot, while the maximum reduction of mean wind suction coefficients is about 30%.

• 터널과지하공간
• /
• 제28권6호
• /
• pp.692-705
• /
• 2018

발파를 이용한 터널의 굴착 시 수반되는 가장 큰 문제 중 하나는 발파 시 발생하는 지반진동으로 이를 저감시키기 위한 노력의 일환으로 와이어쏘 장비를 이용하여 터널 심발공 주변에 인공 자유면을 형성하고 이를 통해 파쇄도를 향상시키며 동시에 발파 진동을 저감시키는 기술이 개발되어 오고 있다. 본 연구에서는, 실규모 발파 실험 및 3D-DFPA 해석 기법을 통해 인공 자유면의 구조조건에 따른 진동저감 및 발파 효과에 대한 고찰을 수행하였으며, 이에 더불어 인공 자유면 발파에서의 효율적 설계를 위한 경험적 기준을 제안하였다. 분석 결과, 인공 슬롯 자유면은 홉킨슨 효과에 의한 스폴파괴 유발 및 충격진동의 전파경로 차단 등 발파 진동 저감을 야기하는 것으로 판단되었으며, 인공 자유면이 존재하는 경우, 존재하지 않는 경우에 비해 파쇄체적 및 파쇄효율이 모두 증가하는 경향을 보였다. 이는 인공 자유면이 실제 자유면과 동일한 역할을 수행함에 따라 최소저항선의 감소효과를 야기하는 것으로 판단되었으며, 실험 결과를 토대로 발파 공경 및 최소저항선에 대한 발파 파쇄체적의 상관관계를 도출 및 경험적 설계 기준을 제안하였다. 결론적으로, 인공 자유면 발파를 수행 시 발파 공경 대 최소저항선의 비가 약 5에서 8사이의 값을 갖도록 설계하는 것이 가장 이상적인 표준발파 조건에서의 파쇄효과를 기대할 수 있을 것으로 판단되었다.

• 대한기계학회논문집B
• /
• 제21권7호
• /
• pp.849-861
• /
• 1997

In this study, the effect of hole geometry of the cooling system on the flow and temperature field was numerically calculated. The finite volume method was employed to discretize the governing equation based on the non-orthogonal coordinate with non-staggered variable arrangement. The standard k-.epsilon. turbulence model was used and also the predicted results were compared with the experimental data to validate numerical modeling. The predicted results showed good agreement in all cases. To analyze the effect of the discharge coefficient for slots of different length to width, the inlet chamfering and radiusing holes were considered. The discharge coefficient was increased with increment of the chamfering ratio, radiusing ratio and slot length to width and also the effect of radiusing showed better result than chamfering in all cases. In order to analyze the difference between the predicted results with plenum region and without plenum region, the velocity profiles of jet exit region for a various flow conditions were calculated. The normal velocity components of jet exit showed big difference for the low slot length to width and high blowing rate cases. To analyze the flow phenomena injected from a row of inclined holes in a real turbine blade, three dimensional flow and temperature distribution of the region including plenum, hole and cross stream with flow conditions were numerically calculated. The results have shown three-dimensional flow characteristics, such as the development of counter rotating vortices, jetting effect and low momentum region within the hole in addition to counter rotating vortex structure in the cross stream.

• International Journal of Internet, Broadcasting and Communication
• /
• 제12권2호
• /
• pp.30-36
• /
• 2020

We demonstrated a successful fabrication of 4" Gallium Nitride (GaN)/Diamond High Electron Mobility Transistors (HEMTs) incorporated with Inner Slot Via Hole process. We made in manufacturing technology of 4" GaN/Diamond HEMT wafers in a compound semiconductor foundry since reported [1]. Wafer thickness uniformity and wafer flatness of starting GaN/Diamond wafers have improved greatly, which contributed to improved processing yield. By optimizing Laser drilling techniques, we successfully demonstrated a through-substrate-via process, which is last hurdle in GaN/Diamond manufacturing technology. To fully exploit Diamond's superior thermal property for GaN HEMT devices, we include Aluminum Nitride (AlN) barrier in epitaxial layer structure, in addition to conventional Aluminum Gallium Nitride (AlGaN) barrier layer. The current collapse revealed very stable up to Vds = 90 V. The trapping behaviors were measured Emission Microscope (EMMI). The traps are located in interface between Silicon Nitride (SiN) passivation layer and GaN cap layer.

• 대한기계학회논문집B
• /
• 제28권3호
• /
• pp.304-314
• /
• 2004

An experimental study has been conducted to measure the temperature fields and the local film cooling effectiveness for two and three staggered rows of the rectangular shaped-holes with various blowing rates. The hydraulic diameter of rectangular-shaped hole is 10mm. To compare with the film cooling performance of rectangular-shaped hole, two kinds of circular holes are tested. One has the same hydraulic diameter as the rectangular hole and the other has the same cross sectional area. Also, rectangular holes with expanded exit with same inlet area as rectangular ones are tested. Temperature fields are measured using a thermocouple rake attached on three-axis traversing system. Adiabatic film cooling effectiveness on the surface are obtained based on experimental results of thermochromic liquid crystals. The film cooling effectiveness is measured for various blowing rates and compared with the results for the cylindrical holes. In case of 2 rows, the rectangular holes has better performance than circular holes due to its slot-like geometry. In case of 3 rows, the effecta of hole shape is not clear.

• International Journal of Precision Engineering and Manufacturing
• /
• 제6권2호
• /
• pp.5-11
• /
• 2005

Among the micro machining techniques, micro EDM is generally used for machining micro holes, pockets, and micro structures on difficult-cut-materials. Micro EDM parameters such as applied voltage, capacitance, peak current, pulse width, duration time are very important to fabricate the tool electrode and produce the micro structures. Developed micro EDM machine is composed of a 3-axis driving system and RC circuit equipped with pulse generator. In this paper, using micro EDM machine, the characteristics of micro EDM process are investigated and it is applied to micro holes, slots, and pockets machining. Through experiments, relations between machined surface and voltages and between MRR and feedrate are investigated. Also the trends of tool wear are investigated in case of hole and slot machining.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.970-973
• /
• 1995

The proposal of this paper is the constructing of knowledge database with manufacturing information. This database contains characteristics of workpiece materials, cutting tools, NC machines, manufacturing processes, and work conditions. And all shape in the system are feature models such base plate, step, hole, pocket, boss, and slot. These information generate a final decision for machining process by the expert system.

• 한국전자파학회논문지
• /
• 제16권3호
• /
• pp.311-318
• /
• 2005

평행평판 도파관의 윗면에 2차원적 주기적인 슬롯이 배열된 구조에서 회절특성에 중점을 두어 해석하였다. 주기적인 슬롯배열은 한 축은 무한 슬롯 배열로 두고 다른 축은 유한개의 슬롯 배열로 구성된다. 평행편판 도파관 내부로 입사되는 전자파는 일부 반사되고 일부는 슬롯을 통하여 복사되며 나머지는 주기적인 슬롯이 있는 영역을 넘어 투과하게 된다. 이러한 경우에 평행평판 도파관의 높이, 단일 슬롯의 크기, 그리고 슬롯 배열의 주기에 따라 반사, 복사 그리고 투과되는 전력을 수치 계산하여 살펴보았다. 이러한 연구는 TFT-LCD와 PDP 구조의 됫면에 장착되는 주기적인 원형개구 구조를 이용하는 환기구조 설계에 유익할 것으로 사료된다.