• 한국수자원학회논문집
• /
• 제34권2호
• /
• pp.187-195
• /
• 2001

본 연구에서는 TVD기법을 이용한 천수방정식의 수치모형을 개발하였다. 본 모형은 시간과 공간에서 2차 정확도를 가지며 불연속면에서 수치진동을 억제할 수 있다. 풍상차분기법에 근거한 TVD기법은 Riemann 해의 계산이 수반되어야 하며, 여기서는 HLLC기법이 사용되었다. 개발된 모형의 적용성과 정확성을 검증하기 위해 단순화된 하도에서 댐 붕괴파와 포물형 수조에서의 흐름의 오르내림을 모의하였다. 수치해는 해석해와 잘 일치하였다.

• 대한토목학회논문집
• /
• 제28권5B호
• /
• pp.559-573
• /
• 2008

Navier-Stokes식, Gaussian 분포형 용출함수를 이용한 내부조파, energy absorbing layer로 삼차원 파랑모형을 새롭게 구성하였다. Navier-Stokes식의 수치적분에는 정교한 수치기법인 SPH(Smoothed Particle Hydrodynamics)가 활용된다. 제안된 파랑모형의 검증은 삼차원 포물형 용기에서의 sloshing현상과 Thacker(1981)의 해석해를 토대로 수행되었다. 초기 수면 형상이 Gaussian hump인 경우와 일방향으로 경사진 경우에 대해 수치모의 하였다. 수치모의 결과 수면이 융기되도록 구속한 외부조건이 해제되면서 시작되는 자유진동의 정성적 거동은 비교적 정확히 모의되었으나 시간이 경과될수록 위상차, 침수선이 퇴각하는 등 초기 수면과는 상당히 다른 결과를 보였다. 최종적인 검증은 쐐기모양 해안에서의 비선형 천수, 굴절거동의 수치모의를 토대로 진행되었다. 수치모의 결과 굴절되는 양이 Hamiltonian ray theory가 제공하는 수치보다 전반적으로 작게 나타났다. 이러한 현상은 이상유체와 선형 이론에 기초한 Hamiltonian ray theory에서 간과된 비선형성, 점성으로 인한 양안과 저면에서의 에너지 감쇄, 쇄파 과정에 유동계에 도입되는 에너지 감쇄, 선행파랑에 의한 down-rush와 조우시 발생하는 도수 등에 기인하는 것으로 판단된다.

• 한국해양공학회지
• /
• 제36권1호
• /
• pp.21-31
• /
• 2022

In recent years, various studies have been conducted on oscillating-water-column-type wave energy converters (OWC-WECs) with multiple chambers with the objective of efficiently utilizing the limited space of offshore/onshore structures. In this study, a numerical investigation based on a numerical wave tank was conducted on single, dual, and triple OWC chambers to examine the hydrodynamic performances and the energy conversion characteristics of the multiple water columns. The boundary value problem with the Laplace equation was solved by using a numerical wave tank based on a finite element method. The validity of the current numerical method was confirmed by comparing it with the measured data in the previous experimental research. We undertook a series of numerical simulations and observed that the water column motion of sloshing mode in a single chamber can be changed into the piston motion of different phases in multiple OWC chambers. Therefore, the piston motion in the multiple chambers can generate considerable airflow at a specific resonant frequency. In addition, the division of the OWC chamber results in a reduction of the time-dependent variability of the final output power from the device. As a result, the application of the multiple chambers leads to an increase of the energy conversion performance as well as a decrease of the variability of the wave energy converter.

• Earthquakes and Structures
• /
• 제17권2호
• /
• pp.175-189
• /
• 2019

The aim of the study is to show the results of complex shaking table experimental investigation focused on the response of two models of cylindrical steel tanks under mining tremors and moderate earthquakes, including the aspects of diagnosis of structural damage. Firstly, the impact and the sweep-sine tests have been carried out, so as to determine the dynamic properties of models filled with different levels of liquid. Then, the models have been subjected to seismic and paraseismic excitations. Finally, one fully filled structure has been tested after introducing two different types of damages, so as to verify the method of damage diagnosis. The results of the impact and the sweep-sine tests show that filling the models with liquid leads to substantial reduction in natural frequencies, due to gradually increasing overall mass. Moreover, the results of sweep-sine tests clearly indicate that the increase in the liquid level results in significant increase in the damping structural ratio, which is the effect of damping properties of liquid due to its sloshing. The results of seismic and paraseismic tests indicate that filling the tank with liquid leads initially to considerable reduction in values of acceleration (damping effect of liquid sloshing); however, beyond a certain level of water filling, this regularity is inverted and acceleration values increase (effect of increasing total mass of the structure). Moreover, comparison of the responses under mining tremors and moderate earthquakes indicate that the power amplification factor of the mining tremors may be larger than the seismic power amplification factor. Finally, the results of damage diagnosis of fully filled steel tank model indicate that the forms of the Fourier spectra, together with the frequency and power spectral density values, can be directly related to the specific type of structural damage. They show a decrease in the natural frequencies for the model with unscrewed support bolts (global type of damage), while cutting the welds (local type of damage) has resulted in significant increase in values of the power spectral density for higher vibration modes.

• 한국수소및신에너지학회논문집
• /
• 제34권2호
• /
• pp.155-161
• /
• 2023

Recently, a study on alternative and renewable energy is being conducted due to energy depletion and environmental problems. In particular, a hydrogen has the advantage of converting and storing the remaining energy into water-electrolyzed hydrogen through renewable energy generation. In general, due to reasons such as insulation problems, a study on high-pressure hydrogen storage tanks and related parts has recently been conducted. However, in the case of liquid hydrogen, the volume can be reduced by about 800 times or more compared to high-pressure hydrogen gas, so the study on this is needed as a technology that can increase energy density. In this study, the evaporation characteristics were analyzed under fixed heat flux conditions for liquid hydrogen storage tanks and the change in thermal stratification according to sloshing was analyzed. The heat flux condition was fixed at 250 W/m² and the horizontal resonance frequency of the primary mode was applied to the storage tank. As a result, it was confirmed that the thermal stratification phenomenon decreased compared to the case where the slashing was not present due to forced convection when the slashing was present.

• Nuclear Engineering and Technology
• /
• 제48권1호
• /
• pp.246-258
• /
• 2016

The shield building of AP1000 was designed to protect the steel containment vessel of the nuclear reactor. Therefore, the safety and integrity must be ensured during the plant life in any conditions such as an earthquake. The aim of this paper is to study the effect of water in the water tank on the response of the AP1000 shield building when subjected to three-dimensional seismic ground acceleration. The smoothed particle hydrodynamics method (SPH) and finite element method (FEM) coupling method is used to numerically simulate the fluid and structure interaction (FSI) between water in the water tank and the AP1000 shield building. Then the grid convergence of FEM and SPH for the AP1000 shield building is analyzed. Next the modal analysis of the AP1000 shield building with various water levels (WLs) in the water tank is taken. Meanwhile, the pressure due to sloshing and oscillation of the water in the gravity drain water tank is studied. The influences of the height of water in the water tank on the time history of acceleration of the AP1000 shield building are discussed, as well as the distributions of amplification, acceleration, displacement, and stresses of the AP1000 shield building. Research on the relationship between the WLs in the water tank and the response spectrums of the structure are also taken. The results show that the high WL in the water tank can limit the vibration of the AP1000 shield building and can more efficiently dissipate the kinetic energy of the AP1000 shield building by fluid-structure interaction.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1991년도 가을 학술발표회 논문집
• /
• pp.49-56
• /
• 1991

Seismic analysis of liquid storage structures is carried out by utilizing 2-dimensional fluid elements of a general purpose structural analysis computer program(ADINA), The present analysis focuses on the effects of the wall flexibility and the sloshing of the free water surface. Due considerations are given to the facts that the fluid has no shear resistance and the free surface motion is subjected to the gravity effect. To validate the present method using 2-dimensional fluid elements, the results of several example cases are compared with those by the Housner's approach for rigid wall case, and with those by the Eulerian formulation for flexible wall case.

• 한국해양공학회지
• /
• 제20권2호
• /
• pp.46-51
• /
• 2006

Moonpool characteristics of a cleaning skip related with the performance of a skip are experimentally investigated. Resistance performances of the ship and flow patterns in the moonpool are observed, in order to determine the effect of different shaped moonpool. The ways to reduce ship pithing motion caused by force in the moonpool are examined. Experimental results, using a scale model of cleaning ship with moonpool, show that the step arranged in tier under water leads to significant improvements in performance, such us resistance and ship pithing motion. Depending upon the shape of step in the moonpool, the results indicate that the increment of resistance performance may be up to 35%, especially in the case of no step or high step.

• 한국해양공학회지
• /
• 제27권2호
• /
• pp.53-58
• /
• 2013

Recently, some fluid-structure interaction (FSI) problems involving the fluid impact loads interacting with structures, such as sloshing, slamming, green-water, etc., have been considered, especially in the ocean engineering field. The governing equations for both an elastic solid model and flow model were originally derived from similar continuum mechanics principles. In this study, an elastic model based on a particle method, the MPS method, was developed for simulating the FSI problems. The developed model was first applied to a simple cantilever deflection problem for verification. Then, the model was coupled with the fluid flow model, the PNU (Pusan National University modified)-MPS method, and applied to the numerical investigation of the coupling effects between a cantilever and a mass of water, which has variable density, free-falling to the end of the cantilever.

• Earthquakes and Structures
• /
• 제26권1호
• /
• pp.59-75
• /
• 2024

This paper presents a dam-reservoir interaction model that includes, water compressibility, sloshing of surface water, and radiation damping at the far-end reservoir, to investigate the influence of concrete deterioration on seismic behavior along with seismic performance of gravity dams. Investigations on seismic performance of the dam body have been conducted using the linear time-history responses obtained under six real and 0.3 g normalized earthquake records with time durations from 10 sec to 80 sec. The deterioration of concrete is assumed to develop due to mechanical and chemical actions over the dam lifespan. Several computer programs have been developed in FORTRAN 90 and MATLAB programming languages to analyze the coupled problem considering two-dimensional (2D) plane-strain condition. According to the results obtained from this study, the dam structure shows critical responses at the later ages (75 years) that could cause disastrous consequences; the critical effects of some earthquake loads such as Chi-Chi with 36.5% damage and Loma with 56.2% damage at the later ages of the selected dam body cannot be negligible; and therefore, the deterioration of concrete along with its effects on the dam response should be considered in analysis and design.