• Journal of the Korean Society of Safety
• /
• v.37 no.6
• /
• pp.89-95
• /
• 2022

A method for measuring the length and slope of a temporary structure using an unmanned aerial vehicle (UAV) and 3D modeling method is proposed. The actual length and slope of the vertical member of the specimen were measured and compared with the measured values obtained by the proposed method for the specimens with and without the vertical protection net installed. Based on the result of measuring the length of the temporary structure specimen using the UAV and 3D modeling method, the measured value showed an error of 0.87% when compared to the actual length in the specimen without the vertical protection net installed. In addition, the error of the slope was 0.63°. It was thought that the proposed method could be usable for the purpose of finding parts in wrong installation state on the temporary structure and informing the manager in charge. However, in the case of the specimen with the vertical protection net, the measurement showed a 1.46% error in length and 2.77° difference in slope. Therefore, if a vertical protection net is to be installed in a temporary structure, the measurement accuracy should be improved by utilizing an image processing method, etc.

• Journal of the Korean GEO-environmental Society
• /
• v.2 no.4
• /
• pp.39-50
• /
• 2001

In this study, in order to investigate the effects of reinforcement length and vertical spacing on the factor of safety, the road embankment reinforced by geogrid was analyzed using RSS(Reinforced Slope Stability) program based on limit equilibrium analysis. The result by computer analysis showed that the factor of safety for reinforced slope increased with increasing length of reinforcement and with decreasing vertical spacing of reinforcement up to certain limit. Also, numerical analysis by FLAC was performed on reinforced slope to evaluate the horizontal displacement, horizontal stress, and distribution of tensile forces of reinforcements in the cases of several reinforcement length. The results of analysis showed that the critical failure mode was toe failure or slope failure and the effect by the additional reinforcement length on the slope stability was negligible under stabilized condition.

• Journal of the Korean Society for Precision Engineering
• /
• v.34 no.3
• /
• pp.191-197
• /
• 2017

Light detection and ranging (LiDAR) is one of the most efficient technologies to obtain the topographic and bathymetric map of coastal zones, superior to other technologies, such as sound navigation and ranging (SONAR) and synthetic aperture radar (SAR). However, the measurement results using LiDAR are vulnerable to environmental factors. To achieve a correspondence between the acquired LiDAR data and reality, error sources must be considered, such as the water surface slope, water turbidity, and seafloor slope. Based on the knowledge of those factors' effects, error corrections can be applied. We concentrated on the effect of the seafloor slope on LiDAR waveforms while restricting other error sources. A simulation regarding in-water beam scattering was conducted, followed by an investigation of the correlation between the seafloor slope and peak timing of return waveforms. As a result, an equation was derived to correct the depth error caused by the seafloor slope.

• Geomechanics and Engineering
• /
• v.34 no.6
• /
• pp.623-636
• /
• 2023

This study utilized small-scale physical model tests to investigate the impact of different types of geosynthetics, including geocell, planar geotextile, and wraparound geotextile, on the behaviour of strip footings placed on 0.8 m thick soil fills and backfills with a slope angle of 70°. Bearing capacity and settlement of the footing and failure mechanisms are discussed and evaluated. The results revealed that the bearing capacity of footings situated on both unreinforced and reinforced slopes increased with a greater embedment depth of the footing. For settlement ratios below 4%, the geocell reinforcement exhibited significantly higher stiffness, carrying greater loads and experiencing less settlement compared to the planar and wraparound geotextile reinforcements. However, the performance of geocell reinforcement was influenced by the number and length of the geocell layers. Increasing the geocell back length ratio from 0.44 to 0.84 significantly improved the bearing capacity of the footing located at the crest of the reinforced slope. Adequate reinforcement length, particularly for geocell, enhanced the bearing pressure of the footing and increased the stiffness of the slope, resulting in reduced deflections. Increasing the length of reinforcement also led to improved performance of the footing located on wraparound geotextile reinforced slopes. In all reinforcement cases, reducing the vertical spacing between reinforcement layers from 100 mm to 75 mm allowed the slope to withstand much greater loads.

• Journal of Forest and Environmental Science
• /
• v.20 no.1
• /
• pp.93-109
• /
• 2004

To provide the basic informations related to forest road construction of mountainous terrain, we analyzed changes of the road structure factors such as banking and cutting slope gradients, slope length, road width by the environmental factors such as locations, slope gradients, soil types, road position on physically stabilized forest roads constructed in Gangwon-do. All factors related to the road structures by locations were significant except for banking slope length. Road width, longitudinal gradients, banking and cutting slope length by slope gradients were not significantly different and banking slope gradients in the range less than $30^{\circ}$, from $30^{\circ}$ to $35^{\circ}$ and more than $40^{\circ}$ and cutting slope gradients were significantly different for all areas. Road width, longitudinal gradients, banking slope length by soil types were not significantly different and others were significantly different. All factors related to the road structures by road position were significant except for cutting slope gradients.

• The Research Journal of the Costume Culture
• /
• v.26 no.1
• /
• pp.95-108
• /
• 2018

This study analyzed the body shape of the body of 17~19 years old female students using the SPSS 20.0 statistical program according to the 7th Korea Human Body Survey. Factor analysis was based on six factors including body size, body height, shoulder length, and width, upper body length, hip length, and shoulder inclination related factors. Through this cluster analysis, the body shape of late adolescent female student was classified into four types. Body type 1 was the highest body height factor, and the upper body length and the hip length factor were lower. It was analyzed as 'Long leg in the body'. Body type 2 is the 'narrow shoulder skinny type' with high hip and shoulder slope factors and low body size, body height, shoulder length, and width factor. Body type 3 showed body size, shoulder length, height and hip length factor, and body height factor was rather low 'low hip obese body shape'. Body type 4 was analyzed as 'lower shoulder long upper body type' with higher upper body length factor and lower body size and shoulder slope factor. It is thought that when the pattern is made, it is possible to produce excellent patterns by fitting the dimensions of the body, as well as the dimensions of the shoulder width, the slope, and the hip length.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.11a
• /
• pp.490-493
• /
• 2002

In this study, we have investigated optimum value for side gate length and side gate voltage of double gate (DG) MOSFET with main gate and side gate. We know that optimum side gate voltage for each side length is about 3V. Also, we know that optimum side gate length for each main gate length is about 70nm. We have presented the transconductance and subthreshold slope for each side gate length. We have simulated using ISE-TCAD tool for characteristics analysis of device.

• Journal of the Ergonomics Society of Korea
• /
• v.18 no.2
• /
• pp.11-24
• /
• 1999

The purpose of this study was to obtain the basic data for sound wear design. The objects' of this study were 331 women's university students. The eight items were the shoulder length, shoulder slope, height, weight, chest girth, neck girth, back length, and back shoulder width. The shoulder length and slopes were measured, compared with the right, the left, and other items. The results were as follows; The difference between the right and left shoulder length did not nearly appear. The mean of the right shoulder slopes was $21.3^{\circ}$, and that of the left was $21.9^{\circ}$. According to increase of the age, the right and left shoulder slope tends to be higher. The maximum distribution was $20.7^{\circ}$. According to increase of the age, the maximum distribution tends to be higher. The left compared with the right shoulder length, the right shoulder length of 90.3% objects' was longer than that of the left. The right and left shoulder length of 4.2% objects' were same. The left shoulder length of 5.4% objects' was longer than that of the right. The left compared with the right shoulder slopes, the right shoulder slopes of 12.7% objects' were higher than those of the left. The both size of 20.5% objects' were equal. The left slopes of 66.8% objects' was higher than those of the right.

• Journal of Forest and Environmental Science
• /
• v.30 no.1
• /
• pp.71-75
• /
• 2014

Forest roads failure is one of the most common problems caused by heavy rainfalls. This study investigated the characteristics on stabilization measures installed for cutting slopes failure of forest road resulted from heavy rainfalls. Three primary factors (slope length, slope gradient, soil type) affecting cutting slope failure were considered and stabilization measures were classified into two types (A type: wooden fence, vegetation sandbag, stone masonry; B type: wire cylinder, gabion, concrete retaining wall) through discriminant analysis based on their capacity of resistance to slope failure. Results showed that A type was mainly installed in such conditions as cut slope <8 m, cut slope gradient $30-40^{\circ}$ and soil type with soil while B type occurred in locational conditions as cut slope length >8 m, cut slope gradient < $30^{\circ}$ and > $30^{\circ}$, and soil type of gravelly soil and rock.

• Journal of Forest and Environmental Science
• /
• v.18 no.1
• /
• pp.7-14
• /
• 2001

On the basis of data obtained from forest road collapsed due to a heavy rainfall, this study carried out to evaluate the cutting slope failure factors of forest road by using Quantification theory(II). The results were summarized as follows. The factors on cutting slope failure was ranked in the order of cutting slope length, soil type, aspect, cutting slope gradients and slope gradients. And the slope failure was mainly occurred under such conditions as cutting slope length longer than 8m, soil type with soil, aspect of N, cutting slope gradients steeper than 600 and slope gradients greater than $35{\sim}40^{\circ}$.