• 제목/요약/키워드: slope way

검색결과 228건 처리시간 0.023초

Three-dimensional Numerical Prediction on the Evolution of Nocturnal Thermal High (Tropical Night) in a Basin

  • Choi, Hyo;Kim, Jeong-Woo
    • International Union of Geodesy and Geophysics Korean Journal of Geophysical Research
    • /
    • 제25권1호
    • /
    • pp.57-81
    • /
    • 1997
  • Numerical prediction of nocturnal thermal high in summer of the 1995 near Taegu city located in a basin has been carried out by a non-hydrostatic numerical model over complex terrain through one-way double nesting technique in the Z following coordinate system. Under the prevailing westerly winds, vertical turbulent fluxes of momentum and heat over mountains for daytime hours are quite strong with a large magnitude of more than $120W/\textrm{m}^2$, but a small one of $5W/\textrm{m}^2$ at the surface of the basin. Convective boundary layer (CBL) is developed with a thickness of about 600m over the ground in the lee side of Mt. Hyungje, and extends to the edge of inland at the interface of land sea in the east. Sensible heat flux near the surface of the top of the mountain is $50W/\textrm{m}^2$, but its flux in the basin is almost zero. Convergence of sensible heat flux occurs from the ground surface toward the atmosphere in the lower layer, causing the layer over the mountain to be warmed up, but no convergance of the flux over the basin results from the significant mixing of air within the CBL. As horizontal transport of sensible heat flux from the top of the mountain toward over the basin results in the continuous accumulation of heat with time, enhancing air temperature at the surface of the basin, especially Taegu city to be higher than $39.3^{\circ}C$. Since latent heat fluxes are $270W/\textrm{m}^2$ near the top of the mountain and $300W/\textrm{m}^2$ along the slope of the mountain and the basin, evaporation of water vapor from the surface of the basin is much higher than one from the mountain and then, horizontal transport of latent heat flux is from the basin toward the mountain, showing relative humidity of 65 to 75% over the mountain to be much greater than 50% to 55% in the basin. At night, sensible heat fluxes have negative values of $-120W/\textrm{m}^2$ along the slope near the top of the mountain and $-50W/\textrm{m}^2$ at the surface of the basin, which indicate gain of heat from the lower atmosphere. Nighttime radiative cooling produces a shallow nocturnal surface inversion layer with a thickness of about 100m, which is much lower than common surface inversion layer, and lifts extremely heated air masses for daytime hours, namely, a warm pool of $34^{\circ}C$ to be isolated over the ground surface in the basin. As heat transfer from the warm pool in the lower atmosphere toward the ground of the basin occurs, the air near the surface of the basin does not much cool down, resulting in the persistence of high temperature at night, called nocturnal thermal high or tropical night. High relative humidity of 75% is found at the surface of the basin under the moderate wind, while slightly low relative humidity of 60% is along the eastern slope of the high mountain, due to adiabatic heating by the srong downslope wind. Air temperature near the surface of the basin with high moisture in the evening does not get lower than that during the day and the high temperature produces nocturnal warming situation.

  • PDF

육각 낙석방지망의 성능평가를 위한 실내 및 실대형실험 (Laboratory and Full-scale Testing to Investigate the Performance of Rock Fall Protection System with Hexagonal Wire Net)

  • 윤일로;오세욱;권영철
    • 한국지반환경공학회 논문집
    • /
    • 제15권9호
    • /
    • pp.69-75
    • /
    • 2014
  • 기존에 사용되던 사각형 낙석방지망은 낙석에 의한 충격 완화를 위한 장치가 없어 적층 현상 등을 해결할 수 없으며 과도한 충격으로 철망이 파괴되는 문제 등이 지적되고 있었다. 여러 문제점이 복합적으로 발생하면서 매년 낙석 방지망 자체의 파괴에 의해 많은 피해가 발생하고 있다. 따라서 본 연구에서는 기존의 표준형 낙석방지망의 낙석방호 실패 원인을 고찰하고 설계 시 예상 낙석에너지를 파악하여 적정한 흡수에너지를 가진 육각 낙석방지망을 개발하였다. 또한 실내실험과 실대형실험을 통해 기존 낙석 방지망과의 성능차를 파악하여 육각 낙석방지망의 적용 가능성을 파악하고자 하였다. 실내실험과 실대형실험결과 낙석과 같은 하중 재하 시 육각 낙석방지망에 작용하는 응력은 스프링형 지지 장치에 의해 응력이 완화되어 충격에 의한 소성파괴에 대한 저항성이 우수한 반면 사각 낙석방지망의 경우 작용하는 응력이 직접적으로 낙석방지망에 작용함으로써 하중에 대한 저항력이 육각 낙석방지망보다 효율이 적은 것으로 판단된다.

이중적분을 이용한 완경사면에서의 선형파 방정식 (A Linear Wave Equation Over Mild-Sloped Bed from Double Integration)

  • 김효섭;정병순;이예원
    • 한국해양환경ㆍ에너지학회지
    • /
    • 제12권3호
    • /
    • pp.165-172
    • /
    • 2009
  • 연직 2차원 평면을 대상으로 하는 연속방정식을 수심방향으로 이중적분 하여 수평1차원 파랑방정식을 구하였다. 새 방정식은 복소수 포텐셜 함수로 구성되어 있으며, 파랑의 진폭과 위상경사함수를 도입하여 한 세트의 실수방정식으로도 변형되었다. 파랑진폭과 위상경사함수를 포함한 한 세트의 식은 각각 1차, 2차 상미분방정식이며, 한쪽 경계에서 경계조건을 적절히 지정하여 전 영역에서의 해를 한 방향으로 진행하면서 구할 수 있다. 이때 경계조건으로는 파랑진폭 값, 파랑진폭의 경사, 위상 경사 값이다. 단순한 중앙차분식을 이용하여 식을 차분화 하였다. 새 방정식을 Booij의 경사판, Massel의 부드러운 저면, Bragg의 싸인 함수의 저면에 대하여 적용하여 보았다. 본 방정식은 Massel의 수정완경사방정식, Berkhoff의 완경사방정식, 완전 선형방정식과 비교하여 유사한 결과를 나타내었으며, 유용함을 보였다.

  • PDF

균형증진 훈련이 어깨기울기에 미치는 영향 (The Effect of Balance Training on Shoulder Gradient)

  • 강성헌;이상호;이윤수;이재천;장철;송민옥
    • 대한통합의학회지
    • /
    • 제2권1호
    • /
    • pp.91-100
    • /
    • 2014
  • Purpose : The purpose of this study was to know the influence of the difference in shoulder slope from balance training. Method : Training was divided that the 10 people were a Trampoline group, 10 people were a Togu group, 8 people were a Balance Board group and 9 people were a Control group. Method of the training was that the Trampoline group was carried out on the Trampoline. The training was carried out totally 2 times of 8 set per a week and had a break time during 10 seconds after carried out 30 seconds per one set. Togu group was carried out totally 2 times of 5 minutes per a week and had a break time during 30 seconds after carried out 2 minutes per one set. Balance Board group was carried out totally 2 times of 5 minutes per a week and had a break time 30 seconds after carried out 2 minutes per one set. Data was analyzed by repeated measure of one way ANOVA and repeated measure ANOVA. Result : The shoulder of the slope difference decreased significantly after balance training. The Trampoline group decreased from $3.13{\pm}1.01$ to $2.37{\pm}1.11$, the Togu group decreased from $3.78{\pm}0.85$ to $3.78{\pm}0.85$, the Balance Board group decreased from $1.78{\pm}0.82$ to $1.65{\pm}0.59$ and the Control group decreased from $1.77{\pm}1.16$ to $1.61{\pm}0.62$. Conclusion : The effectiveness improved in the order Togu group, Trampoline group, Balance Board group and Control group from the result of the balance training about difference of slope shoulder.

등줄쥐의 육교형 생태통로 이용에 미치는 환경 특성 (Environmental Factors on the Use of Wildlife Bridge by Striped Field Mouse (Apodemus agraius))

  • 정기영;이지훈;모용원
    • 한국환경생태학회지
    • /
    • 제37권5호
    • /
    • pp.337-346
    • /
    • 2023
  • 도로 건설로 인한 서식지 파편화에 대한 저감방안으로 육교형 생태통로가 건설되고 있기는 하지만 효과성에 대해서는 아직도 논쟁이 있다. 생태통로의 효과성 평가를 위해 족적트랩, 카메라트랩과 같은 모니터링 방법이 실시되고는 있으나 얼마나 많은 개체가 이용하는지 정량적으로 평가하기에는 한계가 있다. 이에 본 연구에서는 생태통로와 인근 지역을 서식지로 이용할 가능성이 큰 소형포유류인 등줄쥐를 대상으로 포획-재포획 방법으로 개체 위치 파악을 통해 생태통로 이용 정도를 도출하고, 트랩 주변 환경 특성을 이용하여 등줄쥐의 생태통로 이용에 미치는 요인을 확인하였다. 등줄쥐의 생태통로 이용도는 격자단위의 포획지점을 연결하여 이동 거리와 경로를 확인하였고, 생태통로 이용에 미치는 환경 특성은 트랩당 포획 횟수를 종속변수로 한 일반화 선형 모형(Generalized linear model)을 이용하였다. 연구결과, 등줄쥐의 이동 거리는 선행연구와 유사하게 나타났으며, 생태통로를 횡단하는 개체가 나타나지 않음에 따라 등줄쥐는 생태통로를 통로보다는 서식지로 이용함을 확인하였다. 등줄쥐가 생태통로를 이용하는 데 영향을 미친 환경 특성은 층위별 식생피복량(1~2m, 2~8m, 8m 이상), 교목식생, 트랩 주변 최대 수목 흉고직경, 경사도가 유의하게 나타났다. 이에 따라 생태통로 조성 시 더 많은 교목과 관목을 식재하고, 높은 경사와 절토사면 생성을 방지하여 생태계 내 먹이원으로 이용될 수 있는 등줄쥐 이용도를 높인다면 생태통로의 효과성을 더 높일 수 있을 것으로 예상된다.

Observational Evidence of Merging and Accretion in the Milky Way Galaxy from the Spatial Distribution of Stars in Globular Clusters

  • Chun, Sang-Hyun
    • 천문학회보
    • /
    • 제38권2호
    • /
    • pp.76-76
    • /
    • 2013
  • The current hierarchical model of galaxy formation predicts that galaxy halos contain merger relics in the form of long stellar streams. In order to find stellar substructures in galaxy, we focused our investigation on the stellar spatial density around globular clusters and on the quantitative properties of the evolved sequences in the color-magnitude diagrams (CMDs). First, we investigated the spatial configuration of stars around five metal-poor globular clusters in halo region (M15, M30, M53, NGC 5053, and NGC 5466) and one metal-poor globular cluster in bulge region (NGC 6626). Our findings indicate that all of these globular clusters show strong evidence of extratidal features in the form of extended tidal tails around the clusters. The orientations of the extratidal features show the signatures of tidal tails tracing the clusters' orbits and the effects of dynamical interactions with the galaxy. These features were also confirmed by the radial surface density profiles and azimuthal number density profiles. Our results suggest that these six globular clusters are potentially associated with the satellite galaxies merged into the Milky Way. Second, we derived the morphological parameters of the red giant branch (RGB) from the near-infrared CMDs of 12 metal-poor globular clusters in the Galactic bulge. The photometric RGB shape indices such as colors at fixed magnitudes, magnitudes at fixed colors, and the RGB slope were measured for each cluster. The magnitudes of the RGB bump and tip were also estimated. The derived RGB parameters were used to examine the overall behavior of the RGB morphology as a function of cluster metallicity. The behavior of the RGB shape parameters was also compared with the previous observational calibration relation and theoretical predictions of the Yonsei-Yale isochrones. Our results of studies for stellar spatial distribution around globular clusters and the morphological properties of RGB stars in globular clusters could add further observational evidence of merging scenario of galaxy formation.

  • PDF

우리나라 생태복원분야 정착의 전망과 과제 (View and Subjects on the Settling the Area of Ecological Restoration in Korea)

  • 문석기;구본학;남상준
    • 한국환경복원기술학회지
    • /
    • 제4권1호
    • /
    • pp.67-79
    • /
    • 2001
  • According to the new general movement of ESSD in Korea, the role, background, and subjects, etc. of Ecological Restoration Area were studied to find out the way for this area to be settled as one kind of industry. Questionnaire and literature study were carried out to understand and to find out the way of the area settlement with the conceptual and practical definition of it. The related sub-areas studied were 1. regulations and standards including design and construction 2. researches and developments around the area 3. related curriculums applying in the educational organizations 4. present situation of the industry. Followings are the results of this study and several proposals for the area to be settled in Korea with the other related areas. 1. The boundary of Ecological Restoration could be defined as the concept of preservation(or conservation) and restoration of the ecosystem with ecological planting - including the restoration strategies for the areas of slope, artificial foundations, watersides and wetlands, with in bio-diversity and eco-forests for these areas. 2. It seems that the more investments needed for the elaborate and professional techniques to be developed for the design and construction works to the contrary that the base of this area be matured already in the several sub-areas. 3. For the successful work of Environmental Restoration, defining the new industrial branch -independent from existing construction industry- is recommended through the law system under the control of the Ministry of Environment. It will be better if professional officer system in governmental organization could follow up this. 4. Educational organization and Technical expert qualifying system to train the Ecological Restoration Professionals should be induced for the effective practice of the area.

  • PDF

자동차 허브 베어링용 씰 금속부품의 판재성형 및 판단조의 복합성형 공정 개발 (Development of Combined Sheet Metal Forming and Plate Forging of a Metal Seal Part of Hub Bearing for an Automobile)

  • 박기근;문호근;오상균;전만수
    • 소성∙가공
    • /
    • 제29권4호
    • /
    • pp.194-202
    • /
    • 2020
  • In this paper, experimental and numerical study on a combined sheet metal forming and plate forging of a seal part of a passenger car's hub bearing is conducted to develop the new process of which target is to remove machining process by plate forging and to achieve near-net shape manufacturing. The previous process of a sheet metal forming inevitably needed a machining process for making stepped sheet after conventional sheet metal forming in a progressive way. The stepped sheet is intended to be formed by plate forging in this study. Through the systematic way of developing the combined forming process using solid elements based-elastoplastic finite element method (FEM), several conceptual designs are made and an optimized process design in terms of geometric dimensioning and tolerance of straightness of the thin part is found, which is exposed to bending in metal forming of axisymmetric part. The predicted straightness measured by the slope angle of the tilted thin region is compared with the experimental straightness, showing that they are in a good agreement with each other. Through this study, a systematic approach to optimal process design, based on elastoplastic FEM with solid elements, is established, which will contribute to innovating the conventional small-scaled sheet metal forming processes which can be dealt with by solid elements.

접촉식 센서 데이터를 이용한 지질 특성 추출 및 지질 분류 (Terrain Feature Extraction and Classification using Contact Sensor Data)

  • 박병곤;김자영;이지홍
    • 로봇학회논문지
    • /
    • 제7권3호
    • /
    • pp.171-181
    • /
    • 2012
  • Outdoor mobile robots are faced with various terrain types having different characteristics. To run safely and carry out the mission, mobile robot should recognize terrain types, physical and geometric characteristics and so on. It is essential to control appropriate motion for each terrain characteristics. One way to determine the terrain types is to use non-contact sensor data such as vision and laser sensor. Another way is to use contact sensor data such as slope of body, vibration and current of motor that are reaction data from the ground to the tire. In this paper, we presented experimental results on terrain classification using contact sensor data. We made a mobile robot for collecting contact sensor data and collected data from four terrains we chose for experimental terrains. Through analysis of the collecting data, we suggested a new method of terrain feature extraction considering physical characteristics and confirmed that the proposed method can classify the four terrains that we chose for experimental terrains. We can also be confirmed that terrain feature extraction method using Fast Fourier Transform (FFT) typically used in previous studies and the proposed method have similar classification performance through back propagation learning algorithm. However, both methods differ in the amount of data including terrain feature information. So we defined an index determined by the amount of terrain feature information and classification error rate. And the index can evaluate classification efficiency. We compared the results of each method through the index. The comparison showed that our method is more efficient than the existing method.

한강 하천제방 호안공법에 따른 식생분포 특성 연구 (A Study on Characteristics of Vegetation Distribution according to Revetment Techniques of Riverbank in Han River, Korea)

  • 김원식;곽정인;이경재;한봉호
    • 한국환경생태학회지
    • /
    • 제25권1호
    • /
    • pp.17-30
    • /
    • 2011
  • 본 연구는 강동구 가래여울마을 한강제방을 대상으로 호안공법에 따른 자연적인 식생유입 현황을 분석하여 생태적인 측면을 고려한 제방 호안 식생유도를 목적으로 수행하였다. 제방 호안공법별 식생 분포 특성을 분석한 결과 장대블록에는 귀화초본이 70.7%로 우점하였고 잔디블록에는 자생초본군락이 48.5%, 방틀블록은 자생초본군락 55.7%로 자생초 본군락 면적은 방틀블록에서 가장 넓었다. 제방 호안공법별 식생피도는 장대블록이 평균 27.9%로 가장 낮았고 잔디블록(평균 95.3%), 방틀블록(평균 97.5%)순으로 높았다. 식생기반면적에서는 장대블록이 가장 협소하였으며 방틀블록이 가장 넓었다. 식물군집구조에서 장대블록은 건조초본 및 덩굴성초본이 주로 우점하였고 식생피도도 낮았으며 잔디블록은 다양한 종이 소규모군락을 형성하였다. 방틀블록은 식생기반 면적이 가장 넓어 다년생 초본인 물억새, 큰김의털,미국쑥부쟁이 등이 넓은 면적의 군락을 형성하였다. 호안공법별 평균 건물중은 장대블록은 $6.75g/m^2$, 잔디블록은 $137.65g/m^2$, 방틀블록은 $187.63g/m^2$으로 방틀블록 식물 건물중이 가장 많았다. 토양특성에서 토양 수분함량은 방틀블록 16.3%, 잔디블록 15.2%인 반면 장대블록은 4.7%로 토양이 매우 건조하였다. 토양 이화학적 특성 분석결과 토성, 토양산도(pH), 치환성 양이온 함량은 호안공법별로 큰 차이가 없었으며 토양유기물 함량(OM)과 유효인산(Available $P_2O_5$)은 장대블록에서 가장 높은 수치를 보였다. 따라서 향후 하천제방 호안녹화의 경우 제방의 안전을 고려하여 가능한 식생기반 면적을 넓혀주어 자연적인 식생 유입이 가능하도록 제방 호안공법 적용이 필요하였다.