• 지질공학
• /
• 제19권2호
• /
• pp.119-129
• /
• 2009

사면의 안정성 분석과 관련하여 지질학적 특성과 지질공학적 특성을 각각 정면적법과 선조사법을 사용하여 선정된 세 사면에 대하여 비교 분석하였다. 분석한 사면의 파괴유형의 결과와 실제 노두 사면에서 발생한 파괴양상과 비교하여 사면 안정성 분석의 방법상 어떤 방법이 더 잘 적용될 수 있는 지 판단한다. 불연속면의 방향성, 확률밀도분포와 간격, 경사방향과 빈도수 및 연장성과 빈도수에 관하여 비교분석한 결과, 각 사면마다 대체로 서로 유사하게 분석되었다. 하지만 방향성 분석에서 사면 2에서는 서로 상이한 결과를 얻었으며, 이는 사면 2에 분포하는 절리군의 방향성은 절리의 길이와 빈도수에서 서로 다르며 선조사법을 이용하여 측정하였을 때 서로 다른 방향성을 보여주는 새로운 절리군의 출현을 의미한다. 절리의 확률밀도분포와 간격은 사면 3에서 높게 나타나며, 이는 사면 3을 구성하는 사질의 암석과 소습곡구조의 발달과 관련이 있는 것으로 사료된다. 선정된 세 사면의 안정성분석에서 정면적법과 선조사법의 비교 분석결과와 그리고 실제노두에서 발생한 사면파괴 양상과의 결과를 비교하였을 때 정면적법이 연구지역의 절취사면의 안정성 분석에서 더 세밀한 파괴유형을 예측할 수 있었으며 선조사법보다 더 유효한 방법으로 분석되었다.

• 한국산림과학회지
• /
• 제107권4호
• /
• pp.385-392
• /
• 2018

석산개발 지역 퇴적장 석축사면의 사면 조성 및 관리기술 증진을 위하여 현황측량을 실시하고, 대표단면을 선정하여 사면의 안정성 해석을 수행한 결과를 요약하면 다음과 같다. 사면안정 해석을 위하여 선정한 대표단면의 퇴적장 최하단부 사면(A) 경사는 $59^{\circ}$로서 급경사를 이루고 있으나, 전체 퇴적장 사면(A, B, C, D, E, F)의 평균경사는 $38.5^{\circ}$이었다. 퇴적장 사면의 수평거리는 총 66.2 m, 사면높이는 48.3 m이지만 퇴적장 석축사면의 경사는 비교적 급하며, 시각적으로도 불안정해 보인다. 사면안정 해석에는 건조시와 포화시를 고려하였으며 포화시의 사면안정 해석은 대상사면이 완전히 포화된 상태를 모델링하여 수행하였다. 지반의 강도정수는 석축과 배면지반으로 구분하고 안전성을 검토하였다. 건기시 안전율은 1.850, 우기시 안전율은 1.333으로 나타나 건기시 및 우기시의 안전율 1.5와 1.2를 상회하여 사면의 활동에 대하여 모두 안전한 것으로 나타났다. 그러나 집중호우 시 퇴적장 사면 상부의 풍화된 마사토는 사면침식과 붕괴 위험성이 높아 배수로 설치 등 적절한 유지관리를 통한 안정대책이 필요하다고 생각된다.

• 한국환경복원기술학회지
• /
• 제12권2호
• /
• pp.106-113
• /
• 2009

In this study, stability of the new gabion system with vegetation base materials was analysed. New gabion system with vegetation base materials is a new approach which has been developed to achieve lope stabilization and revegetation of forest road cut-slope by making the best use of advantages of gabion systems with vegetation base materials. Results from stability analysis are as follows. For the soil density, the angle of internal friction and unit weight of the rock fill was assumed to be $1.90g/cm^3$, $30^{\circ}$ and $2.30t/m^3$, respectively, the slope stability analysis showed that the new gabion system couldn't require any poles to fix it up, and could keep stable during both rainy and dry seasons. As the results of checks against overturning and sliding, the retaining wall with. the new gabion system could produce suitable factors of safety for overturning and sliding. Vegetation established on the surface of the new gabion systems indirectly can help to increase slope stability by prevention of surface erosion. Consequently, the new gabion system with vegetation base materials could achieve the desired effect on slope stabilization as much as existing gab ion system could do, and could promote rapid establishment of vegetation on cut-slopes.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(II)
• /
• pp.397-402
• /
• 2003

Infiltration of rainfall causes railway embankment to be unstable and may result in failure. Basic relationship between the rainfall and stability of railway embankment are defined to analyze the stability of embankment by rainfall. An experimental study for defining of infiltration rate of rainfall into slope is conducted in the lab. The results of Rainfall infiltration show that rainfall infiltration is not equal to infiltration as like reservoir because rate of rainfall infiltration is controlled by slope angle. Based on these results, boundary condition of rainfall is altered and various numerical analysis are performed. The variation of shear strength, the degree of saturation and pore-water pressure for railway slope during rainfall can be predicted and the safety factor of railway slope can be expressed as the function of rainfall amount, namely rainfall index. Therefore, it is judged that this rainfall index can be a good tool for the rail-transport operation control.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.129-136
• /
• 2005

The deterministic analysis method has generally used to evaluate the slope stability and it evaluates the slope stability with decision value that is a representative value of design variables. However, one of disadvantages in the deterministic approach is there is not able to consider the uncertainty of soil strength properties, even though it is the biggest influential parameter of the slope stability. On the other hand, the limit state design(LSD) can take a consideration of uncertainties and computes both the reliability index and the probability of failure. LSD method is capable of overcoming the disadvantages of deterministic method and evaluating the slope stability more reliably. In this study, both the mean value and standard deviation of the internal land's representative soil strength properties applied to process the LSD method. The major purpose of this study is to gauge the general applicability of the limit state design in soil slope and to weigh the comparative validity of the proposed partial safety factor. In order to reach the aim of this study, the partial safety factor and resistance factor which totally satisfied the slope's overall safety factor were calculated by the load and resistance safety factor design (LRFD).

• Structural Engineering and Mechanics
• /
• 제41권3호
• /
• pp.339-348
• /
• 2012

The slope stability analysis is usually done using the methods of calculation to rupture. The problem lies in determining the critical failure surface and the corresponding factor of safety (FOS). To evaluate the slope stability by a method of limit equilibrium, there are linear and nonlinear methods. The linear methods are direct methods of calculation of FOS but nonlinear methods require an iterative process. The nonlinear simplified Bishop method's is popular because it can quickly calculate FOS for different slopes. This paper concerns the use of inverse analysis by genetic algorithm (GA) to find out the factor of safety for the slopes using the Bishop simplified method. The analysis is formulated to solve the nonlinear equilibrium equation and find the critical failure surface and the corresponding safety factor. The results obtained by this approach compared with those available in literature illustrate the effectiveness of this inverse method.

• Geomechanics and Engineering
• /
• 제19권1호
• /
• pp.1-9
• /
• 2019

Shallow failures occur frequently in both engineered and natural slopes in expansive soils. Rainfall infiltration is the most predominant triggering factor that contributes to slope failures in both expansive soils and clayey soils. However, slope failures in expansive soils have some distinct characteristics in comparison to slopes in conventional clayey soils. They typically undergo shallow failures with gentle sliding retrogression characteristics. The shallow sliding mass near the slope surface is typically in a state of unsaturated condition and will exhibit significant volume changes with increasing water content during rainfall periods. Many other properties or characteristics change such as the shear strength, matric suction including stress distribution change with respect to depth and time. All these parameters have a significant contribution to the expansive soil slopes instability and are difficult to take into consideration in slope stability analysis using traditional slope stability analysis methods based on principles of saturated soil mechanics. In this paper, commercial software VADOSE/W that can account for climatic factors is used to predict variation of matric suction with respect to time for an expansive soil cut slope in China, which is reported in the literature. The variation of factor of safety with respect to time for this slope is computed using SLOPE/W by taking account of shear strength reduction associated with loss of matric suction extending state-of-the art understanding of the mechanics of unsaturated soils.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2005년도 학술발표논문집
• /
• pp.387-392
• /
• 2005

The research was performed to predict the potential landslide with roughness index. It was known that fractal dimension and surface area index can be represented the topography, specially when the natural slopes were rough or rugged. A test site was selected and fractal dimension and surface area index were calculated from the irregular triangle network. Fractal dimension were ranged between $2.016{\sim}2.046$ and surface area index $1.56E+07{\sim}2.59E+07$. Surface area index increased as fractal dimension increased. Slope stability was calculated by infinite slope stability analysis model and was compared to slope stability by fractal and surface area index. In the result, unsafe zones where slope stability is under 1.1 were $5.11{\sim}6.25%$ for the test site. It can be said that fractal dimension and surface area index are a good index to evaluate the slope stability because when fractal dimension and surface area index are greater, then stability of the site is more unsafe.

• 터널과지하공간
• /
• 제21권1호
• /
• pp.20-32
• /
• 2011

개착과정에서 붕락현상이 발생한 암반사면의 거동양상을 분석하였다. 개착사면 암반의 특성 분석을 위하여 시추작업을 수행하였으며, BIPS 영상 분석을 통하여 불연속면의 방향성과 시추공 내의 출현 위치를 측정하였다. 회수된 코어를 관찰하여 암반 내부의 구조적 취약성을 고찰하였다. 절리면에 협재된 팽윤성 점토광물의 조성을 X-선 회절분석을 통하여 조사하였으며, 직접전단실험을 수행하여 절리면 전단강도를 측정하였다. 사면파괴를 유발시킬 수 있는 절리들의 위치 및 방향성을 고려한 블록해석을 수행하여 규모별 블록안정성을 산출하였다. 횡단면 해석기법을 이용하여 개착과정 중에 발생할 수 있는 지반거동 양상을 분석하였으며, 안정성 확보를 위하여 소요되는 보강량을 산정하였다. 보강작업이 수행된 개착사면의 추가적인 거동양상을 계측 해석을 통하여 고찰하였다.

• Structural Engineering and Mechanics
• /
• 제57권1호
• /
• pp.1-20
• /
• 2016

On the basis of the geological conditions of high and steep mountainous slope on which an exit portal of an express railway tunnel with a bridge-tunnel combination is to be built, the composite structure of the exit portal with a bridge abutment of the bridge-tunnel combination is presented and the stability of the slope on which the express railway portal is to be built is analyzed using three dimensional (3D) numerical simulation in the paper. Comparison of the practicability for the reinforcement of slope with in-situ bored piles and diaphragm walls are performed so as to enhance the stability of the high and steep slope. The safety factor of the slope due to rockmass excavation both inside the exit portal and beneath the bridge abutment of the bridge-tunnel combination has been also derived using strength reduction technique. The obtained results show that post tunnel portal is a preferred structure to fit high and steep slope, and the surrounding rock around the exit portal of the tunnel on the high and steep mountainous slope remains stable when rockmass is excavated both from the inside of the exit portal and underneath the bridge abutment after the slope is reinforced with both bored piles and diaphragm walls. The stability of the high and steep slope is principally dominated by the shear stress state of the rockmass at the toe of the slope; the procedure of excavating rockmass in the foundation pit of the bridge abutment does not obviously affect the slope stability. In-situ bored piles are more effective in controlling the deformation of the abutment foundation pit in comparison with diaphragm walls and are used as a preferred retaining structure to uphold the stability of slope in respect of the lesser time, easier procedure and lower cost in the construction of the exit portal with bridge-tunnel combination on the high and steep mountainous slope. The results obtained from the numerical analysis in the paper can be used to guide the structural design and construction of express railway tunnel portal with bridge-tunnel combination on high and abrupt mountainous slope under similar situations.