• 전기의세계
• /
• 제31권6호
• /
• pp.437-444
• /
• 1982

Although several kinds of conduction mechanism of PTC thermistor have been reported, there were few satisfying results. In this paper, the reported conduction mechanism theories were scrutinized and analyzed by using the experimental results. PTC thermistors for this study were manufactured by adding Sb$\_$2/O$\_$3/, AI$\_$2/O$\_$3/, TiO$\_$2/, and SiO$\_$2/ to BaTiO$\_$3/, and by sintering it at different temperatures. In order to analyze the conduction mechanism, R-T characteristics and its frequency dependence of specimens were measured. And also, the structures of specimens were studied. Especially this paper emphasized the explanation of the resistivity characteristics as the grain growth state of PTC thermistor specimens with respect to soaking temperature. According to the results, the resistivity of PTC thermistor whose grain was formed by semiconducting, was independent to the grain size at room temperature. For small and uniform grain size, the slope of the resistivity near the Curie temperature and the resistivity above the Curie temperature became greater and PTCR effect was improved.

• 지질공학
• /
• 제15권2호
• /
• pp.185-199
• /
• 2005

토석류 산사태물질은 암석의 풍화 산물이므로 사태물질의 특성은 그 지역에 분포하는 기반암의 종류에 의존한다. 이 연구에서는 사태물질의 종류에 따른 이동특성에 대한 연구를 수행하기 위하여 암석의 풍화 특성과 지형 조건이 서로 다른 3개 지역에서 발생한 26개 산사태를 연구대상으로 하였다. 산사태 발생지점의 정밀야외 조사를 통하여 암석의 종류, 풍화 및 지형 특성 등을 분석하였고 사태물질의 입도분포와 체적에 따른 이동과 지형 특성과의 관계를 추적하였다 지형조건 중 사면의 경사변화는 사태물질 이동거리에 큰 영향을 미치는 것으로 판단되며, 이는 경사 변화가 많을 경우 사태물질의 확산속도와 에너지가 변화하기 때문에 일정한 경사를 따라 사태물질이 흘러내리는 것보다 더 큰 이동거리를 보이는 것으로 해석하였다. 사태물질의 이동거리는 사태물질의 체적과 입도에도 큰 영향을 받는 것으로 파악되었다. 특히 사태물질 체적은 지질특성에 확연히 구별되어 반려암 지역의 경우 화강암 지역에 비해 $4\~5$배 크다. 사태물질의 입도측면에서 중립질의 화강암 분포지역보다 대규모 핵석이 발달하고 풍화심도가 불규칙적인 반려암 지역에서 사태물질 규모 및 이동거리가 훨씬 크게 나타난다.

• 물과 미래
• /
• 제29권4호
• /
• pp.177-186
• /
• 1996

하천 만곡부에서의 하상 횡경사 결정은 유수와 유수의 소류력에 의해 변동하는 하상면과의 상호관계를 규명하는 이론적인 접근에서 출발하게 된다. 이러한 경우 흐름은 완전히 발달한 흐름으로 해석하게 되며 하상에서는 소류사가 일어나고 있는 상태에서 유수력과 하상물질에 의한 저항력간의 평형을 바탕으로 해석을 시도하게 된다. 한계소류력을 대표하는 연구로서 Shields diagram이 많이 이용되고 시동조건으로 Shields parameter를 0.06으로 대표해 주고 있다. 지금까지 만곡부의 하상횡경사 결정에서는 대부분의 방법들이 Shields parameter 의 적용에서 0.06을 일률적으로 채택하고 있다. 본 연구에서는 Shields parameter에서의 실험조건인 균일입경하상이라는 조건이 적용되지 않는 일반 자연하천에서 혼합입경하상의 입도분포곡선 형태에 따라 생기는 Shields parameter의 변동을 고려할 수 있도록 하므로써 보다 정확한 만곡부 하상횡경사 추정이 가능한 방법을 제시하였다.

• 한국지반환경공학회 논문집
• /
• 제17권5호
• /
• pp.5-16
• /
• 2016

A rainfall induced slope failure is a common natural hazard in mountainous areas worldwide. Sudden and rapid failures which have a high possibility of occurrence in a steep slope are always the most dangerous due to their suddenness and high velocities. Based on a series of experiments this study aimed to determine a critical angle which could be considered as an approximate threshold for a sudden failure. The experiments were performed using 0.42 mm mean grain size sand in a 200 cm long, 60 cm wide and 50 cm deep rectangular flume. A numerical model was created by integrating a 2D seepage flow model and a 2D slope stability analysis model to predict the failure surface and the time of occurrence. The results showed that, the failure mode for the entire material will be sudden for slopes greater than $67^{\circ}$; in contrast the failure mode becomes retrogressive. There is no clear link between the degree of saturation and the mode of failure. The simulation results in considering matric suction showed good matching with the results obtained from experiment. A subsequent discarding of the matric suction effect in calculating safety factors will result in a deeper predicted failure surface and an incorrect predicted time of occurrence.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.1-11
• /
• 2006

To be design the slope, the area distributed the shale or mica schist which was metamorphosed by shale must carefully consider the stability. The shale has the detrital materials of which the grain size are 1/256mm and fissility. As the reason the slope of shale is always unstable by bedding slip and fissility but also the joint and fault. Mica schist is also another unstable rock for slope by schistosity, cleavage, axial plane of a fold etc. In general shale and mica schist contain the swelling clay minerals such as smectite, vermiculite and montmorillonite. These minerals make the slope unstable. At OO tunnel construction area for the rail way of the Kyungbu high speed train, the slope of mica schist is very unstable by the distribution phenomena of the discontinuous plane such as joints which are 1-5cm spacing and thrust and strike-slip fault. By the drilling core of this area, most RQD have 0-20%.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.346-346
• /
• 2017

In Northern Laos, maize is cultivated in continuous cropping without fertilizer, fallowing nor any other soil conservation practice. It is expected that this inadequate management in maize cultivation will degrade soil and decrease yield. However, there is limited information about the change of soil condition and yield under continuous maize cultivation. We tried to evaluate the change of soil condition and yield under continuous maize cultivation in Northern Laos. Our study was conducted in farmer's flat and slope fields in Sainyabuli province where maize cultivation had been introduced earlier than the other provinces of Northern Laos. Our study was conducted in 21 fields in 2014, and in 19 fields in 2015. We analyzed grain yield and soil characteristic (total carbon (TC), total nitrogen (TN), available phosphorus (Av-P), exchangeable cation, pH, soil texture) at 3 places in each field. The 3 places were set at different elevation level (lower position, middle position, upper position) in slope fields. Further, the period of continuous maize cultivation and crop management practice were investigated. Then, by evaluating the relation between the period of continuous maize cultivation and yield and the soil characteristics, the effect of maize cultivation was estimated. Crop management practices were similar among the investigated fields. Maize was cultivated in rain season. Grain seed and cob were harvested on September or October, but shoot was left on the fields. No crop was cultivated during dry season. Fertilization and fallowing has never been conducted under continuous maize cultivation. On the other hand, the period of maize cultivation was different among the fields, and ranged from 2 years to 30 years. In the slope fields, as the period of continuous maize cultivation was longer, the contents of TC and TN were lower at all 3 positions, Av-P content was lower at the upper position, exchangeable potassium (Ex-K) content was lower at the middle and the upper positions. The other soil characteristics weren't related with the period of maize cultivation in the slope fields. In contrast, soil characteristics weren't related with the period of maize cultivation in the flat fields. Yield was lower as the period of maize cultivation was longer at the upper position of the slope fields. At middle position of slope fields, yield tended to be low with increase of the period of maize cultivation. In contrast, yield wasn't related with the period of continuous maize cultivation in flat fields. From the results about crop management, it was presumed that the period of maize cultivation was one of the main factors causing the difference of yield and soil characteristics among the fields. Therefore, from the result of yield and soil condition, it was considered that the continuous maize cultivation decreased soil productivity in the slope fields with decline of TC, TN, Av-P, Ex-K and yield at upper position of slope fields, and decline of TC and TN in the other positions in Sainyabuli province.

• Journal of the Korean Wood Science and Technology
• /
• 제29권2호
• /
• pp.118-125
• /
• 2001

본 연구에서는 소나무의 고부가적 이용을 위한 휨가공 특성을 조사하였다. 먼저 휨가공에 영향을 미치는 수종 특성에 대하여 조사하였다. 다음으로 섬유경사각과 휨가공 특성의 관계에 대하여 조사하였다. 시험편은 섬유경사각 $0^{\circ}$, $30^{\circ}$, $45^{\circ}$, $60^{\circ}$, $90^{\circ}$와 치수 $10mm(T){\times}20mm(R){\times}350mm(L)$로 제작하였다. 휨가공 전의 고주파조사 시간은 30, 60, 90, 120초로 하였다. 본 연구의 결과는 다음과 같다. 1. 섬유경사각의 크기는 휨가공에 있어 탄성계수와 높은 상관이 있었으며, 섬유경사각이 커질수록 휨가공 성능이 크게 증가하였다. 2 강도적인 측면을 고려할 때, 지나치게 큰 섬유경사각은 강도가 약하기 때문에 휩가공채의 용도에 따라 적당한 섬유경사각의 크기가 조정되어야 할 것으로 판단되었다. 3. 휨가공성은 수종에 따라 현저하게 차이가 있는 것으로 조사되었고 수종특성이 명백히 존재하였다.

• 한국환경복원기술학회지
• /
• 제13권2호
• /
• pp.95-104
• /
• 2010

The purpose of this study is to analyze the correlation between physical stream characteristics and bed materials in natural rivers. Accordingly, four natural rivers were selected reference streams, they were Nam river, Sumjin River, Naesung River and Han River. Grain size distributions of bed materials were gravels, cobbles and boulders in Han river and Nam river, were sand, gravels, cobbles and boulders in Sumjin river and were sand in Naesung river. Four reference streams were divided into each two reference reaches (straight and bend) by plan and profile characteristics of naturally meandering stream. Therefore various reference reaches were chosen in the aspect of physical stream characteristics and grain size distributions. The results investigated and analyzed are as follows. The streams that grain sizes distributions of river bed materials were coarse were stable because they had variety of bed slope without sediment deposition, and then the riffles frequency and the physical characteristics were various. Also, velocitydepth regime were various in four kinds, and the response parts for water level change were small, so that channel flow status were stable and excellent condition. On the other hand, sand river that grain sizes distributions of river bed materials were fine had not the variety of parameters as velocity-depth regimes, sediment deposition, channel flow status and riffles frequency, so that the physical stream characteristics were not various.

• 대한지리학회지
• /
• 제32권4호
• /
• pp.435-444
• /
• 1997

bar는 하상의 기복중에서 가장 대표적인 충적지형으로 어느 하천에서나 쉽게 발견된다. 본 연구의 목적은 이러한 bar의 지형적 특성을 구명하는 것이다. 연구지역은 골지천 하류뷰이며, 총 6개 지점 bar를 조사하였다. 6개 bar는 모두 입경이 2mm 이상인 gravel bar이며 3, 5지점을 제외한 나머지 bar들은 유슈의 방향을 따라 길쭉한 형상을 하고 있다. bar의 력을 조사한 결과, 상류뷰에서 하류뷰로 가면서 입경이 감소하며 원마도는 증가하였다. bar의 형상은 수위변도, 하도경사, 형상계수 등에 따라 국지적으로 다르게 변화한다.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1210-1210
• /
• 2001

On farm analysis of protein, moisture and oil in cereals and oil seeds is quickly being adopted by Australian farmers. The benefits of being able to measure protein and oil in grains and oil seeds are several : $\square$ Optimize crop payments $\square$ Monitor effects of fertilization $\square$ Blend on farm to meet market requirements $\square$ Off farm marketing - sell crop with load by load analysis However farmers are not NIR spectroscopists and the process of calibrating instruments has to the duty of the supplier. With the potential number of On Farm analyser being in the thousands, then the task of calibrating each instrument would be impossible, let alone the problems encountered with updating calibrations from season to season. As such, NIR technology Australia has developed a mechanism for \ulcorner\ulcorner\ulcorner their range of Cropscan 2000G NIR analysers so that a single calibration can be transferred from the master instrument to every slave instrument. Whole grain analysis has been developed over the last 10 years using Near Infrared Transmission through a sample of grain with a pathlength varying from 5-30mm. A continuous spectrum from 800-1100nm is the optimal wavelength coverage fro these applications and a grating based spectrophotometer has proven to provide the best means of producing this spectrum. The most important aspect of standardizing NIB instruments is to duplicate the spectral information. The task is to align spectrum from the slave instruments to the master instrument in terms of wavelength positioning and then to adjust the spectral response at each wavelength in order that the slave instruments mimic the master instrument. The Cropscan 2000G and 2000B Whole Grain Analyser use flat field spectrographs to produce a spectrum from 720-1100nm and a silicon photodiode array detector to collect the spectrum at approximately 10nm intervals. The concave holographic gratings used in the flat field spectrographs are produced by a process of photo lithography. As such each grating is an exact replica of the original. To align wavelengths in these instruments, NIR wheat sample scanned on the master and the slave instruments provides three check points in the spectrum to make a more exact alignment. Once the wavelengths are matched then many samples of wheat, approximately 10, exhibiting absorbances from 2 to 4.5 Abu, are scanned on the master and then on each slave. Using a simple linear regression technique, a slope and bias adjustment is made for each pixel of the detector. This process corrects the spectral response at each wavelength so that the slave instruments produce the same spectra as the master instrument. It is important to use as broad a range of absorbances in the samples so that a good slope and bias estimate can be calculated. These Slope and Bias (S'||'&'||'B) factors are then downloaded into the slave instruments. Calibrations developed on the master instrument can then be downloaded onto the slave instruments and perform similarly to the master instrument. The data shown in this paper illustrates the process of calculating these S'||'&'||'B factors and the transfer of calibrations for wheat, barley and sorghum between several instruments.