• 한국수자원학회논문집
• /
• 제51권11호
• /
• pp.999-1009
• /
• 2018

본 연구에서는 국내 하천에서 실측한 유사량 자료를 기초로 데이터 마이닝의 Model Tree 기법을 통해 유사량 산정 공식들을 도출하였으며, 이를 활용하여 내성천에서의 안정하도 단면을 평가하였다. 본 연구에서 도출한 유사량 공식은 국내 모래하상 전체를 대상으로 한 경우, 하폭, 유속, 수심, 경사, 하상토 중앙입경을 선택하였을때 적합도가 가장 높은 것으로 나타났다. 또한 내성천으로 자료의 범위를 한정한 경우에는 경사를 제외한 하폭, 유속, 수심, 하상토 중앙입경을 선택한 유사량 공식의 적합도가 가장 높게 나타났다. 각각의 Model Tree 공식들은 내성천 영주댐 하류 용혈지점에서의 안정하도 단면 평가를 수행하는데 적용되었으며, 현재 내성천의 단면과 비교했을 때 향후 안정하도 단면으로의 변화를 위해 하상의 침식이 발생할 것으로 예측되었다. 또한 현재 하상보다 완만한 경사가 유지될 경우 장기적으로 평형상태에 도달할 것으로 예측되었다.

• 한국조경학회지
• /
• 제33권2호
• /
• pp.32-47
• /
• 2005

This study was carried out to investigate and propose a green-wall system with evergreen plants for urban greening of Tongyeong City. To achieve these goals, the requirements and possibilities for wall greening were investigated and evaluated considering the location, topography, and climate of Tongyeong City. Existing walls were analyzed and then a suitable green wall system is proposed. Tongyeong City and its 151 islands covers the central and the southern parts of the Goseong peninsula. Most of the land is covered with hills and mountains; $43.9\%$ of the land area has a slope greater than $15\%$ and most hills and mountains near the urban area have a slope of more than $30\%$. As a result of the topographical properties, concrete retaining walls can often be seen along the streets in urbanized areas. These retaining walls are not only unattractive, but they also create environmental problems, and thus should be replaced with native evergreen plants. Options for replacing the retaining walls include evergreen vine-plants such as Hedaa spp. and Euonymus radicans, but native evergreen shrubs such as Pittosporum tobira, Nandina domestica, Raphiolepis umbellata, Ilex cornuta, flex crenata, Fatsia japonic, and Aucuba japonica may be a more attractive option. Current wall conditions are unsuitable for planting vines, therefore, a reservoir-drainage-type plant box filled with a light artificial substrate is required for greening these concrete retaining walls. These might be irrigated in the dry season and fertilized annually by an appropriate system. These plant boxes could be attached along the entire walls. An experiment investigating effects of substrates and bark-chip mulching on the growth of Hedera spp. showed that the mixture of cerasoil and field soil(v/v, 4:6) was superior to field soil alone and to the mixture of perlite small grain, large grain, and field soil(v/v/v, 2:2:6). Bark-chip mulching tended to increase the growth of Hedera spp..

• 한국수자원학회논문집
• /
• 제47권12호
• /
• pp.1213-1225
• /
• 2014

본 연구에서는 혼합사로 구성된 망상하천에서 사주의 변화와 하상토 분급현상을 실내실험을 통하여 파악하였다. 하상경사가 급한 하도에서 유사 유출량은 시간의 변화에 따라 매우 불규칙하지만, 경사가 완만한 하도에서 유사 유출량은 규칙적이고, 일정한 주기를 나타내었다. 또한 2중 퓨리에 해석을 통하여 지배적인 사주의 특성과 진폭을 분석하였다. 하상고가 상승하면 무차원 하상토 입경은 작아졌지만, 하상고가 저하되면 무차원 하상토 입경은 커졌다. 기층에서 무차원 한계소류력과 표층에서 무차원 한계 소류력의 비가 증가하면, 표층에서 평균입경과 무차원 하상토 중앙입경이 작아졌다. 또한 국부적으로 하상경사가 증가하면서, 유사의 선택적 이동에 의하여 하상토가 분급되고, 평면적으로 입경이 불균일하게 분포하는 분급 특성이 나타났다.

• 한국수산과학회지
• /
• 제40권3호
• /
• pp.160-166
• /
• 2007

The coarse deposit with a lower mud content adjacent to the shelf of the southern East Sea is probably a "relict" sediment deposited in response to a lower stand of sea level during the Pleistocene. The sediment that developed on the slope and in the deep sea was river-borne primarily and was secondarily reworked or redistributed by the Tsushima Warm Current from the East China Sea. The clay mineralogy of the area suggests various sources of fine-grained sediment from adjacent rivers, the Korea Strait, volcanic material from Ulleung Island, and the Japan coast. Massive sand, bioturbated mud, homogeneous mud, and laminated mud were the dominant facies found in the core sediments from the study area. The massive sand was mainly volcanic ash from an eruption on Ulleung Island (9300 yr BP) and consisted of colorless pumiceous glass and a black scoriaceous type. The sedimentation rates on the slope, based on the Ulleung-Oki ash layer, were about 10cm/ky higher than in the basin. Other than the coarse-grain sediment, the mean size of the fine sediment dominating the bioturbated and homogeneous muds in the basin and the laminated mud on the slope was 6-10 phi. This indicates a difference in the major sedimentary process: hemipelagic sedimentation in the Ulleung Basin and mass flow deposition, such as turbidite, on the slope of the southern East Sea.

• 한국해양학회지
• /
• 제25권1호
• /
• pp.36-48
• /
• 1990

본 연구는 동해의 대륙붕 및 대륙사면에서의 다모류 군집의 종 조성과 분포을 알 기 위해 수행되었다. 다모류의 채집은 1985년 4월에 1987년 4월, 10월의 3회의 항해 동안 이루어졌다. 채집된 다모류는 총 36과 112 종이었으며, 우점다모류는 Chaetozone setosa, Aglaophanus malmgrent Ampharete arctica Lerchellules horikoshii, Tharyx sp., 와 Magelona pacifica 등이었다. 본 조사지역의 다모류 군집에 대한 주요 기여종 들은 복반부의 냉수종들이었다. 특히 우점종들은 대륙붕에서부터 대륙사면 상부 혹은 중부에서 주로 분포하며, 특정 서식 깊이를 보였다. 전반적인 평균서식밀도를 300개체 / m$^2$이며, 송풍부도는 15종/0.2 m$^2$ 정도이다. 평균서믹밀도와 종풍부도지수는 600 m 나 그 이상의 수심에서 뚜렷한 변화를 보였다. 우점종의 평균서식밀도와 밀접한 상관 관계를 보인 물리적 환경은 수심, 수온, 니질함량, 평균입도 등이었다.

• 한국의류산업학회지
• /
• 제10권6호
• /
• pp.989-996
• /
• 2008

The purpose of this study is to provide the basic knowledge for the pattern development of a flared skirt. Two flat pattern (FP) methods, the concentric circle method and the corrected concentric circle method, and a draping were used for pattern making. Using these patterns, skirts were made with lengthwise grain in the centerline. The influence of pattern making method on the silhouette of the flared skirt was evaluated by the hemlines formed at the skirt worn in a dress form. Moreover, the combined influence of pattern making method and cutting direction on the silhouette of the flared skirt was examined with the draping pattern (DP) skirt and a FP skirt with $45^{\circ}$ bias grain in the centerline. The DP skirt had more uniform nodes and formed a stable wave form than the FP skirts throughout the whole hemlines. The number of nodes was reduced with lining in the two FP skirts, whereas the number of nodes was not changed in the DP skirt. The unit wave form of all the skirts by three patterns showed long loop form, and the slope angles of the unit wave form of the two FP skirts were higher than that of the DP skirt. The silhouette of the flared skirt was highly influenced by the shape of the waist circumference line in patterns. The DP skirt with lengthwise grain in the centerline showed good silhouette with uniform nodes and high marking efficiency, compared to the FP skirt with $45^{\circ}$ bias grain in the centerline.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제52권6호
• /
• pp.235-240
• /
• 2003

In this paper, we present the fabrication and the characteristic analysis of sequential lateral solidification(SLS) poly-Si thin film transistors(TFT's) with molybdenum gate for active matrix liquid displays (AMLCD's) pixel controlling devices. The molybdenum gate is applied for the purpose of low temperature processing. The maximum processing temperature is 55$0^{\circ}C$ at the dopant thermal annealing step. The SLS processed poly-Si film which is reduced grain and grain boundary effect, is applied for the purpose of electrical characteristics improvements of poly-Si TFT's. The fabricated low temperature SLS poly-Si TFT's had a varying the channel length and width from 10${\mu}{\textrm}{m}$ to 2${\mu}{\textrm}{m}$. And to analyze these devices, extract electrical characteristic parameters (field effect mobility, threshold voltage, subthreshold slope, on off current etc) from current-voltage transfer characteristics curve. The extract electrical characteristic of fabricated low temperature SLS poly-Si TFT's showed the mobility of 100~400cm$^2$/Vs, the off current of about 100pA, and the on/off current ratio of about $10^7$. Also, we observed that the change of grain boundary according to varying channel length is dominant for the change of electrical characteristics more than the change of grain boundary according to varying channel width. Hereby, we comprehend well the characteristics of SLS processed poly-Si TFT's witch is recrystallized to channel length direction.

• 한국수산과학회지
• /
• 제45권6호
• /
• pp.694-703
• /
• 2012

To understand the characteristics of sedimentary and benthic environments in habitats of naturally-occurring intertidal benthic macroalgae, various geochemical parameters of sediment (grain size, ignition loss [IL], chemical oxygen demand [COD], and acid volatile sulfur [AVS]) and pore water (temperature, salinity, pH, and nutrients) were measured in the southern intertidal zone of Hampyeong Bay at two month intervals from April to October 2009. Ecological characteristics including the distribution and biomass of benthic macroalgae were also investigated. Benthic macroalgae were distributed below 4 to 5 m depth from mean sea level near the lower portion of the intertidal zone where air exposure time is relatively short. The distribution area and biomass of benthic macroalgae gradually decreased during the study period. The surface sediments in the benthic algal region were mainly composed of finer sediments, such as slightly gravelly mud and mud. The temperature, salinity, pH, and nutrient concentrations (except dissolved inorganic nitrogen) in pore water did not differ in regions with and without benthic macroalgae, whereas the mean grain size and the concentrations of IL, COD, and AVS in sediments were much higher in regions harboring benthic macroalgae. The correlation between mean grain size and IL in sediments displayed two distinct gradients and the slope was much steeper in regions harboring benthic macroalgae, indicating that the content of organic matter in benthic algal region is not solely dependent on mean grain size. Our results indicate that the benthic macroalgae in the southern intertidal zone of Hampyeong Bay play an important role in the accumulation of organic matter in sediment.

• 한국해양공학회지
• /
• 제22권6호
• /
• pp.7-12
• /
• 2008

The present study numerically investigates the effect of the shape of absorbing revetment on wave overtopping rate under regular and irregular incident waves. At first, the numerical model developed by Hur and Choi(2008), which considers the flow through a porous medium with inertial, laminar and turbulent resistance terms, directly simulates Wave-Structure-Sandy seabed interaction and can determine the eddy viscosity with LES turbulent model in 2-Dimensional wave field (LES-WASS-2D), is validated when compared to experimental data. Numerical simulations are then performed to examine the effect of the shape of absorbing revetment and incident wave conditions on wave overtopping rate. The numerical result shows that the wave overtopping rate decreases with the slope gradient of absorbing revetment under both regular and irregular waves. In addition, the effects of mean grain size and porosity of absorbing revetment, incident wave period and crest height on wave overtopping rate are discussed.

• The Journal of the Acoustical Society of Korea
• /
• 제22권4E호
• /
• pp.167-175
• /
• 2003

Shear wave velocity was measured and grain size analysis was conducted on two core samples obtained in unconsolidated marine sediments of the western continental margin, the East Sea. A pulse transmission technique based on the Hamilton frame was used to measure shear wave velocity. Duomorph ceramic bender transducer-receiver elements were used to generate and detect shear waves in sediment samples. Time delay was calculated by changing the sample length from the transducer-receiver element. Time delay is 43.18 μs and shear wave velocity (22.49 m/s) is calculated from the slope of regression line. Shear wave velocities of station 1 and 2 range from 8.9 to 19.0 m/s and from 8.8 to 22 mis, respectively. Shear wave velocities with depth in both cores are qualitatively in agreement with the compared model〔1〕, although the absolute value is different. The sediment type of two core samples is mud (mean grain size, 8-9Φ). Shear wave velocity generally increases with sediment depth, which is suggesting normally consolidated sediments. The complicated variation of velocity anisotropy with depth at station 2 is probably responsible for sediment disturbance by possible gas effect.