• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.585-588
• /
• 2008

KICT has been carried out inventory research on the cut slopes of national roads. Inventory research results are basic data using cut slope management system. Inventory data are classified by general status, cut slope characteristics and inspector opinion. Inventory data are utilized to figure out dangerous slopes and decide survey ranking of detailed safety diagnostication. This paper drew the distribution area of dangerous cut slopes using inventory data in Chungcheongdo, and verified efficiency on distribution area of dangerous cut slopes by comparing occurrence frequency of real collapsed cut slopes.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2001년도 봄 학술발표회 논문집
• /
• pp.183-190
• /
• 2001

There are complicated and big shear zone which is about several tens meter in the middle of the cutting slope in this study area. And slope stability analysis is very hard because many fault zones are gathered in the shear zone. This study furnish imformations of scrutinized geological survey, numerical stability analysis, reinforcement work analysis and computation of ground mass properties. Then this offer rational slope stability analysis, rock mass decision and counterplan.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2001년도 봄 학술발표회 논문집
• /
• pp.265-272
• /
• 2001

Excavation in a big city is different from excavation in a local area because construction methods and stability are directly connected in a loss of life. Especially, estimate of rock mass slope stability is excuted by more detail and safty work. In this study, we are made reserches in rock mass slope stability and safety method that the slope is closed by elementary school in a big city. The result of many field study and numerical analysis is shown up direct reinforcement used to anchor.

• 한국의류산업학회지
• /
• 제7권2호
• /
• pp.225-230
• /
• 2005

This research was undertaken to compare basic bodice prototypes for Internet shopping customer, and to select a profitable fit vacant space quantity between clothing and body. A total one hundred of eighteen outfits (4 types of pattern ${\times}$ 9 subjects ${\times}$5 body areas) were constructed with basic bodice drafting method of Japan Bunka Women's University according to nine male body types. Fifty-two experts analysis of the different prototypes as five body area and evaluate the most appropriate ease amount and stabilization of the simulation images on the computer. The experiments with automated methods using simulation image are based on AZ program of TORAY, Japan. Data was analyzed using percentiles, frequency and $X^2$. Taken together, the present result of vacant space quantity and stability evaluation through images shows that there is a significant difference in the size variation of the chest circumference, shoulder slope and waist circumference. In case of ease amount, chest area, shoulder slope, waist area and armhole except neckline area were shown more appropriate on the basic bodice pattern without size change. In case of stabilization, the chest area, shoulder slope and armhole except waist area and neckline area was shown the best on the basic bodice pattern without size change. However the waist area was shown on the basic bodice pattern plus 2 cm, neckline was shown more appropriate on the basic bodice pattern plus 1cm.

• 대한인간공학회:학술대회논문집
• /
• 대한인간공학회 1995년도 춘계학술대회논문집
• /
• pp.155-164
• /
• 1995

For efficient operation, vital hand controls must be easily controlled by the operator from his normal working position. The primary working area based on operator's working comfort was developed to serve as a design guideline tothe control panel layout. Ten male subjects participated in the experiment in which working comfort was measured for two controls of a lever type control and a knob type control with respect to the frontal and sagittal distances from the body center and the slope of a workplace. The response surface methodolgy using a central composite design was employed to develop a prediction model for perceived working comfort of each control. Both controls have a similar pattern of comfortable working area, but the lever type control has slightly broader working area. The concept of the proposed working area is a significant extension to the conventional working area such as Farley's or Squires' curves. It is shown that the distance toa control device and the slope have a quadratic effect to working comfort. It is noticeable that comfortable working area exists outside the conventional working area. The result of the response surface analysis also indicated that a little slope of about 15 .deg. for a control panel improves working comfort.

• 전기학회논문지
• /
• 제67권4호
• /
• pp.569-577
• /
• 2018

In this paper, with the aid of information which is included within data, preprocessing algorithm-based black plastic classifier is designed. The slope and area of spectrum obtained by using laser induced breakdown spectroscopy(LIBS) are analyzed for each material and its ensuing information is applied as the input data of the proposed classifier. The slope is represented by the rate of change of wavelength and intensity. Also, the area is calculated by the wavelength of the spectrum peak where the material property of chemical elements such as carbon and hydrogen appears. Using informations such as slope and area, input data of the proposed classifier is constructed. In the preprocessing part of the classifier, Principal Component Analysis(PCA) and fuzzy transform are used for dimensional reduction from high dimensional input variables to low dimensional input variables. Characteristic analysis of the materials as well as the processing speed of the classifier is improved. In the condition part, FCM clustering is applied and linear function is used as connection weight in the conclusion part. By means of Particle Swarm Optimization(PSO), parameters such as the number of clusters, fuzzification coefficient and the number of input variables are optimized. To demonstrate the superiority of classification performance, classification rate is compared by using WEKA 3.8 data mining software which contains various classifiers such as Naivebayes, SVM and Multilayer perceptron.

• 지질공학
• /
• 제17권4호
• /
• pp.577-587
• /
• 2007

본 연구지역은 절취사면 연장이 약 450m에 달하며 사면 절취결과 암질의 측방변화가 현저한 지반조건을 나타냈다. 사면 안정대책의 수립을 위해 절취사면에서 구성암석, 지질구조, 불연속면의 방향성 등 지질공학적인 조사를 수행하였다. 절취사면의 방향성, 사면높이, 지반조건 등을 고려하여 6개의 Zone으로 구분하고, 안정성 분석은 불연속면의 방향성과 사면의 절취방향간의 기하학적 상관관계에 의한 안정성 분석이 가능한 DIPS 프로그램을 이용한 평사투영법으로 실시하였다. 사면안정성 분석결과를 바탕으로 시공성, 안정성, 경제성을 고려하여 비교적 큰 암괴의 이완시 도로 하단부에 미치는 영향을 최소화 할 수 있는 고강도 낙석 방지망(higth tensile steel wire net) 설치, 사면 보호공, 옹벽의 증고 등 다양한 공법으로 사면안정 대책을 수립, 시행하였다.

• 한국환경복원기술학회지
• /
• 제1권1호
• /
• pp.63-69
• /
• 1998

The slope revegetation methods in Korea are generally the hydroseeding mixed with perennial herbs, soil, fibers, and fertilizer in consideration of scenic landscape rather than ecological and engineering effect. But perennial herbs can't protect the slope from deep surface erosion and they are not tall enough to create the original naturalness at the boundary parts of existing woodlands. This study is about the slope revegetation method using nutritional propagation capacity of plants and the experimental construction was carried out on the cut-slope of Yongin Hoam C.C. We dug several trenches to a depth of 80cm and at intervals of 150cm from each other. After placing various kinds of live branches(Salix species) into the trench, we backfilled with the excavated soils and finally sprayed water mixed with soil-stabilizer, fertilizer. As six months passed, we made a vegetation research and check the slope surface erosion. Vegetation research was performed in examining the frequency of each block using transect method. 31 kinds of plant species appeared in total area($113.6m^2$) and the dominant species are Setaria viridis, Artemisia rubripes, Persicaria pubescens, Plantago asiatica, Cyperus amuricus, Commelina communis. Among the examined blocks, '아', the top part of the slope, showed the ratio of 1.4 as the highest Alpha-diversity. With regard to life form, therophytes were shown dominant distribution of 58% of total species and neophytes relatively low distribution of 16%. It can be estimated that there is no ecological stabilization of this slope, because of ruderal species' occupation of 74% in total area. Regarding the slope stabilization, the serious surface erosion didn't take place in spite of heavy rainfall this year, but a little surface erosion took place at the block where no other species coming from outside of the site were found.

• 한국환경생태학회지
• /
• 제18권2호
• /
• pp.124-130
• /
• 2004

덕유산국립공원의 못봉지역을 중심으로 남향사면인 송계사-못봉지역과 북향사면인 월하탄-못봉지역의 계곡부를 대상으로 사면방향과 해발고에 따른 산림구조를 조사 분석하였다. 사면 전체로 볼 때, 북향사면이 남향사면에 비하여 교목층과 아교목층의 밀도, 평균 수고와 흉고직경, 흉고단면적 둥이 모두 높았다. 해발고가 높아짐에 따라 상대 중요치가 증가하는 수종은 들메나무, 까치박달 등이었으며, 감소하는 수종은 졸참나무, 갈참나무 등이었다. 식생층 전체의 목본식물 종다양도는 북향사면이 1.362로서 남향사면의 1.242보다 높았다. 이것은 북향사면이 남향사면에 비하여 종수와 균재도가 모두 높기 때문이었다. 해발고대별 전체 식생충의 종수, 종다양도는 2개 사면 모두 해발고가 높아짐에 따라 감소하는 경향이었다. Cluster 분석 결과 남향사면과 북향사면 중, 하부의 활엽수혼효군집, 남향사면과 북향사면 상부의 들메나무-신갈나무 군집, 능선부인 정부의 신갈나무 군집 등 3개 군집으로 구분되었다. 상대중요치에 의한 종상관 분석 결과 졸참나무, 물박달나무, 피나무는 3개 수종간 유의적인 정의 상관이 있었다. 서어나무는 층층나무, 피나무, 생강나무와 유의적인 정의 상관이 있었다. 들메나무는 소나무와 유의적인 부의 상관이 있었다.

• 한국산림과학회지
• /
• 제89권2호
• /
• pp.275-284
• /
• 2000

본 연구는 집중호우로 인하여 임도사면의 붕괴가 발생된 변성암지역 및 화성암지역의 임도를 대상으로 성토사면의 토질역학적 특성파악과 사면안정해석을 실시하였다. 그 결과는 다음과 같다. 1) 통일분류법에 의한 임도성토사면의 토질의 분류는 화성암과 변성암지역 모두 토사사면은 SW, 풍화암사면은 SP, 연암사면은 GP로 나타났으나, 호박돌 섞인 토사사면에서는 화성암지역은 SP, 변성암지역은 GW로 나다났다. 2) 화성암지역의 성토사면 흙의 건조말도는 $1.34g/cm^2{\sim}1.59g/cm^2$, 비중은 2.57~2.61, 간극비는 0.66~0.93으로 나타났고, 변성암지역의 흙의 건조밀도는 $1.35g/cm^2{\sim}1.51g/cm^2$, 비중은 2.67~2.77, 간극비는 O.78~1.01로 나타났다. 3) 흙의 강도정수인 내부마찰각과 점착력의 시험결과, 화성암지역에서의 내부마찰각은 $29.51^{\circ}{\sim}41.82^{\circ}$ 점착력은 $0.03kg/cm^2{\sim}0.38kg/cm^2$, 변성암지역에서의 내부마찰각은 $21.43^{\circ}{\sim}41.43^{\circ}$, 점착력은 $0.05kg/cm^2{\sim}0.44kg/cm^2$로 나타났다. 4) 사면안정해석을 실시한 결과 안전율은 전체적으로 화성암지역의 경우에는 풍화암사면, 변성암지역의 경우에는 토사사면과 풍화암사면이 1 이하로 붕괴발생위험이 가장 큰 것으로 나타났다.