• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.736-744
• /
• 2009

The abrupt failure of slope caused by a concentrated rainfall would be a disaster in this country. Specially, the soil slope may be collapsed by the rainfall seepage, however, there is not much information for the mechanism of slope failure during rainfall. As analyzing the stability of slope by rainfall, the conventional method is to put the ground-water level on the surface of slope. However, it may provide the over-reinforcement for the slope stability. Futhermore, although over-reinforcement for the slope was fulfilled, the possibility of potential slope failure still exists. In this study, the slope stability by the conventional design method and the causes of unstable slope during rainfall were investigated. To analyze the slope stability by rainfall, the computer program SEEP/W for the analysis of seepage was used. As changing the intensity and duration of rainfall in SEEP/W, the analysis were performed. After completion of analysis, the porewater pressure data from SEEP/W was applied to SLOPE/W. As a results of this analysis, it is not reasonable that the groundwater level is going up to the surface of slope during rainfall. Therefore, the conventional reinforcement for the slope stability is not obvious to satisfy the criterion safety factor during rainfall. The reasonable counterplan is to install drainage hole on the surface of slope in order to prevent erosion and debris flow.

• 터널과지하공간
• /
• 제29권5호
• /
• pp.305-317
• /
• 2019

노출 암반과 시추 코어를 특성화하고, 터널, 공동 및 광산 갱도에서 지보 및 보강 대책을 추정하기 위해 RMR 및 Q 분류법이 기술자들에 의해 널리 사용되어왔다. 사면에서의 암반분류는 SMR이 많이 사용되었지만 Q-Slope가 2015년부터 사면에 도입되었다. 지난 10년간, Q-slope라 불리는 수정된 Q시스템이 노천광산의 벤치, 도로사면 사면에 적용하기 위해 많은 저자들에 의해 시험되었다. 이 시험들을 통하여 Q-slope 값과 장기 안정 및 무지보 사면 경사각 사이에 간단한 상관관계가 있음이 나타내어 왔다. 터널이나 지하공간에서 RMR과 Q를 병용하면서 비교를 통해 상호보완 해왔던 것과 마찬가지로 사면에서도 SMR과 병행하여 Q-Slope를 사용할 수 있을 것이다. 국내에서 발표사례가 없는 Q-Slope의 사용방법과 인도네시아 Pasir 노천석탄광의 적용 예를 소개하고자 한다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 토목섬유 특별세미나
• /
• pp.81-92
• /
• 2000

Green Slope(F.F.R : Fabric Form Reinforcement Method) is one of an environmental slope protection method at steep cutting sites. This method is that soil and rock at the steep slope is fixed using the environmental Fabric Form, Nail, Rock Bolt and Rock Anchor, And then, the surfaces covered with grasses or weeds. This method will be satisfied both safe slope protection and natural environment appearance. Green Slope is a useful method of the construction sites of steep cutting slopes.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2007년도 정기총회 및 학술발표대회
• /
• pp.263-266
• /
• 2007

In this paper, analysis results on the failure of slope behind a Plant Complex of Gimhae due to typhoon Rusa in 2002 are introduced. The left side of the slope was reinforced by soil nails and the right side of the slope was going to construct slope reinforcement works. In the slope failure, the damage area is about $34,000m^2$, the lower width of slope failure is about 230m, the upper width of slope failure is about 50m, and the height of slope failure is about 120m. The elevation of a bedrock in the right side of the slope was lower than the left side of the slope. Due to the depth of weathered soils and weathered rocks in right side of the slope was thick, it will be expected that the effects of pore-water pressure during the rainfalls are large. For the analysis of the failure mechanism, 3-dimensional numerical analysis was carried out by FLAC-3D.

• 한국환경복원기술학회지
• /
• 제3권1호
• /
• pp.1-9
• /
• 2000

The purpose of this study was to analyze the characteristics of soil erosion on the fill-slope of forest road by elapsed years after road construction. Thirteen plots were established on the fill-slope of the newly-constructed forest road, and surveyed for two years(1997~1998). In these plots, the data about soil erosion, surface runoff, vegetation coverage, slope structural characteristics and rainfall were collected. In 1997, the major causes for soil erosion were found by the correlation coefficients with the amount of surface runoff from the fill-slope, vegetation coverage, slope length, slope degree, total rainfall and max. 1 hour rainfall. But, in 1998, the major causes for soil erosion were vegetation coverage and slope degree. Using the stepwise multiple regression method, in 1997, the amount of soil erosion from the fill-slope was complexly expressed as a exponential function of statistically significant the amount of surface runoff from the fill-slope, total rainfall, slope degree of fill-slope and vegetation coverage, but, in 1998, simply expressed as a exponential function of vegetation coverage.

• Geomechanics and Engineering
• /
• 제36권6호
• /
• pp.631-640
• /
• 2024

In the traditional slope stability analysis, ignoring the spatial variability of slope soil will lead to inaccurate analysis. In this paper, the K-L series expansion method is adopted to simulate random field of soil strength parameters. Based on Random Limit Equilibrium Method (RLEM), the influence of variation coefficient and fluctuation range on reliability of soil slope supported by micro-pile is investigated. The results show that the fluctuation ranges and the variation coefficients significantly influence the failure probability of soil slope supported by micro-pile. With the increase of fluctuation range of soil strength parameters, the mean safety factor of the slope increases slightly. The failure probability of the soil slope increases with the increase of fluctuation range when the mean safety factor of the slope is greater than 1. The failure probability of the slope increases by nearly 8.5% when the fluctuation range is increased from δ_v=2 m to δ_v =8 m. With the increase of the variation coefficient of soil strength parameters, the mean safety factor of the slope decreases slightly, and the probability of failure of soil slope increases accordingly. The failure probability of the slope increases by nearly 31% when the variation coefficient increases from COV_c=0.2, COV_φ=0.05 to COV_c=0.5, COV_φ=0.2.

• 터널과지하공간
• /
• 제18권6호
• /
• pp.447-456
• /
• 2008

노천광산에서 사면설계는 안정성과 경제성 측면에서 동시에 접근하여 결정해야 한다. 또한 일반 도로나 철도 연변의 사면과는 달리 대부분 지보나 보강없이 굴착해야 하기 때문에 사면각도가 가장 중요한 설계 변수이다. 본 연구에서는 인도네시아 파시르에 위치한 노천채광방식의 대규모 석탄광산 사면에 대하여 안정성 측면에서의 사면 각도 및 한계사면높이를 결정하였으며 이러한 설계가 가지고 있는 불확실성을 보완할 수 있는 계측 및 계측자료 해석을 수행하였다. 연구 결과, 사면각도(Overall Elope angle) $30^{\circ}$를 유지하는 경우 안전율 1.5를 확보하는 최대개발심도는 $353{\sim}438m$로 계산되었으나 강도정수에 대한 민감도분석결과를 고려할 때 사면높이는 300m를 초과하지 않는 것이 바람직하다. 또한 변위계측자료에 대한 역변위속도 분석 결과가 현장사면 사례와 잘 일치하여 이 방법을 통해 사면의 불안정성 및 파괴시기를 대략적으로 예측할 수 있을 것으로 판단된다.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2007년도 정기총회 및 학술발표대회
• /
• pp.505-508
• /
• 2007

Usually, cut-slope is the term that call rock slope. Therefore, the cause of instability of cut-slope is influenced generally in lithological and structure geological qualities including weathering disintegration. Through the several case studies, we could confirm that stabilization countermeasure also should be based in geological properties.

• 자원환경지질
• /
• 제33권1호
• /
• pp.51-59
• /
• 2000

As a part of natural hazard assessment, regional slope stability analysis was conducted using Geoscientific Information System (GIS) in the northern area of Chungju Lake. Selected factors which affect the slope stability in the study area were lithology, soil, density of lineament, groundwater level, dip of slope, aspect of slope, and geological engineering properties. Geological structural domains were determined by collected data of joint orientation from about 200 sites in order to produce a slope instability map. Potential type of failure and its direction could be expected through the domains. And a slope instability map was produced, comparing the representative orientations of the domains with the orientations of the slopes which were made through TIN module in ARC/INFO. Under the consideration of environmental geological characteristics of the study area, rating and weighting of each factor of slope stability analysis were decided and spatial analysis of regional slope stability was couducted through overlaying technique of GIS. The result of areal distribution of slope stability showed that the most unstable area was the area between Mt. Pudae and Mt. Jubong, and the northern area of the railway station, Samtan.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 가을 학술발표회 논문집
• /
• pp.16-26
• /
• 2002

As the slope designs had simply followed some slope guidelines during 1960's∼1970's, of which the main purpose was to estimate earth work quantities in the feasibility stage, slope failures had been experienced in Korea Highways. Various site investigation methods for highway cut-slopes have been continuously developed, and major cut-slope failures caused by slope instability have rapidly reduced. The failure mode of recent cut-slope failures in highways during typhoon RUSA No.15. featured a debris flow in soil mass activated by flowing water. The study of the surface soil scour and the debris flow caused by heavy rainfall must be done to protect the cut-slope failures in the future