• 전기학회논문지
• /
• 제58권1호
• /
• pp.69-76
• /
• 2009

This paper describes sensorless high-speed control for 45,000rpm/22kw type PMSM by using iterative adaptive sliding mode observer. The proposed algorithm is based on sensorless vector control by on-line estimating the speed of rotor in the wide speed operating range between the starting operation. In addition, it shows the enhanced performance of the iterative adaptive observer by lessening its chattering and getting stable response in limited PWM period. The simulation and experiment results show the reliable performance of the proposed algorithm through starting to high speed operating range.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 D
• /
• pp.1159-1161
• /
• 1997

This paper presents a power system stabilizer(PSS) using the $H_{\infty}$ observer-based sliding mode controller($H_{\infty}$ observer-based SMC) for unmeasurable state variables. The effectiveness of the proposed $H_{\infty}$ observer-based SMPSS for unmeasurable state variables is shown by the simulation result.

• Journal of Power Electronics
• /
• 제9권4호
• /
• pp.582-592
• /
• 2009

This paper proposes a new speed sensorless direct torque and flux controlled interior permanent magnet synchronous motor (IPMSM) drive. Closed-loop control of both the torque and stator flux linkage are achieved by using two proportional-integral (PI) controllers. The reference voltage vectors are generated by a SVM unit. The drive uses an adaptive sliding mode observer for joint stator flux and rotor speed estimation. Global asymptotic stability of the observer is achieved via Lyapunov analysis. At low speeds, the observer is combined with the high frequency signal injection technique for stable operation down to standstill. Hence, the sensorless drive is capable of exhibiting high dynamic and steady-state performances over a wide speed range. The operating range of the direct torque and flux controlled (DTFC) drive is extended into the high speed region by incorporating field weakening. Experimental results confirm the effectiveness of the proposed method.

• 한국해양공학회지
• /
• 제20권6호
• /
• pp.7-17
• /
• 2006

Depth and heading control of an AUV are considered to follow the predetermined depth and heading angle. The proposed control algorithm is designed. based on a sliding mode control using estimated hydrodynamic coefficients. The hydrodynamic coefficients are estimated with conventional nonlinear observer techniques, such as sliding mode observer and extended Kalman filter. By using the estimated coefficients, a sliding mode controller is constructed for the combined diving and steering maneuver. The simulation results of the proposed control system are compared with those of control system with true coefficients. This paper demonstrates the proposed control system, discusses the mechanisms that make the system stable and follows the desired depth and heading angle, accurately, in the presence of parameter uncertainty.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.846-851
• /
• 2004

In this paper, a sliding mode control based on disturbance observer is proposed to attenuate disturbance responses in an active magnetic bearing system, which is subject to base motion. An algorithm for exactly decoupling the disturbance estimation dynamics from the sliding mode dynamics is developed. It is also shown that the proposed method preserves the robustness of the sliding mode and asymtotically achieves zero regulation error, in the presence of external disturbances and parametric uncertainties. The proposed control is applied to a 2-DOF active magnetic bearing system subject to base motion. The feasibility of the proposed technique is illustrated, and the results of an experimental demonstration are shown.

• International Journal of Ocean System Engineering
• /
• 제1권1호
• /
• pp.16-27
• /
• 2011

The depth and heading control of an autonomous underwater vehicle (AUV) are considered to follow the predetermined depth and heading angle. The proposed control algorithm was based on a sliding mode control, using estimated hydrodynamic coefficients. The hydrodynamic coefficients were estimated employing conventional nonlinear observer techniques, such as sliding mode observer and extended Kalman filter. Using the estimated coefficients, a sliding mode controller was constructed for a combined diving and steering maneuver. The simulated results of the proposed control system were compared with those of a control system that employed true coefficients. This paper demonstrated the proposed control system, and discusses the mechanisms that make the system stable and accurately follow the desired depth and heading angle in the presence of parameter uncertainty.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.648-653
• /
• 1993

This paper presents an nonlinear observer scheme for flexible joint robot manipulators. This nonlinear observer scheme is based on the sliding mode method. Sliding controllers have recently been shown to feature excellent robustness and performance properties for specific classes of nonlinear tracking problems. Dynamic equations of flexible joint robot manipulators are derived from the Euler-Lagrange equations by forming the corresponding Lagrangian. Simulation results are presented to show the validness of the proposed nonlinear observer scheme.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.284-284
• /
• 2000

In adaptive fuzzy control systems. fuzzy systems are used to approximate the unknown plant nonlinearities. Until now. most of the papers in the field of controller design for nonlinear system using fuzzy systems considers the affine system with fixed grid-rule structure based on system state availability. This paper considers observer-based nonlinear controller and dynamic fuzzy rule structure. Adaptive laws for fuzzy parameters for state observer and fuzzy rule structure are established so that the whole system is stable in the sense of Lyapunov.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 A
• /
• pp.297-299
• /
• 1995

In this paper, a disturbance observer with binary control is proposed to suppress the chattering of sliding mode observer in estimation of the external disturbance. Binary control has the properly of chattering alleviation in addition to advantages of the conventional sliding mode control. As a simulation result, it is confirmed that the robust and high precision position control is possible by the proposed binary observer.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제50권2호
• /
• pp.80-86
• /
• 2001

We design a sliding mode cascade observer to estimate derivatives of the output. In the 1st step of the observer, the output will be estimated, and the 1st order derivative of the output will be estimated via the 2nd step of the observer. Also, nth order derivative of the output will be estimated in the n+1th step of the observer. Exponential convergence of the estimation errors is shown under the bounded initial condition. Numerical examples will be presented to show the validity of the proposed observer.