• Journal of Power Electronics
• /
• 제14권5호
• /
• pp.1028-1037
• /
• 2014

To optimize controller design and improve static and dynamic performances of three-phase four-leg inverter systems, a compound control method that combines state feedback and quasi-sliding mode variable structure control is proposed. The linear coordinate change matrix and the state variable feedback equations are derived based on the mathematical model of three-phase four-leg inverters. Based on system relative degrees, sliding surfaces and quasi-sliding mode controllers are designed for converted linear systems. This control method exhibits the advantages of both state feedback and sliding mode control. The proposed controllers provide flexible dynamic control response and excellent stable control performance with chattering suppression. The feasibility of the proposed strategy is verified by conducting simulations and experiments.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 D
• /
• pp.2759-2761
• /
• 2001

Sliding mode is a robust control method and can be applied in the presence of model uncertainties and parameter disturbances. But there ane problems in sliding mode controller. Hard in modeling system parameters, chattering, etc. In this paper, new sliding controller design method is proposed for solving the above problems using fuzzy sliding mode contros(FSMC) scheme are considered. we propose that fuzzy logic system are used to approximate unknown system functions in desinging the SMC of Inverted Pendulum. In the method, a fuzzy logic system is utilized to approximate the unknown function f of the nonlinear system. As a simulation result of applying the inverted pendulum, the sliding controller shows good robust characteristics.

• Journal of Power Electronics
• /
• 제19권6호
• /
• pp.1403-1412
• /
• 2019

A coupled inductor-dual boost-inverter (CIDBI) with a differential structure has been presented for application to a micro-inverter photovoltaic module system due to its turn ratio of a high-voltage level. However, it is difficult to design a CIDBI converter with a conventional PI regulator to be stable and achieve good dynamic performance, given the fact that it is a high order system. In view of this situation, a sliding mode control (SMC) strategy is introduced in this paper, and two different sliding mode controllers (SMCs) are proposed and adopted in the left and right side of two Boost sub-circuits to implement the corresponding regulation of the voltage and current. The schemes of the SMCs have been elaborated in this paper including the establishment of a system variable structure model, selection of the sliding surface, determination of the control law, and presentation of the reaching conditions and sliding domain. Finally, the mathematic analysis and the proposed SMC are verified by experimental results.

• 센서학회지
• /
• 제28권3호
• /
• pp.146-151
• /
• 2019

This paper reports a sliding window filtering approach for ground moving targets with cross-correlated sensor noise and uncertainty. In addition, the effect of uncertain parameters during a tracking error on the model performance is considered. A distributed fusion sliding window filter is also proposed. The distributed fusion filtering algorithm represents the optimal linear combination of local filters under the minimum mean-square error criterion. The derivation of the error cross-covariances between the local sliding window filters is the key to the proposed method. Simulation results of the motion of the ground moving target a demonstrate high accuracy and computational efficiency of the distributed fusion sliding window filter.

• 한국압력기기공학회 논문집
• /
• 제19권2호
• /
• pp.61-68
• /
• 2023

The phenomenon of fretting wear due to the flow-induced vibration in steam generator (SG) tube is a significant degradation mechanism in nuclear power plants. Fretting wear in SG tube is primarily attributed to the friction and impact forces between the SG tube and the tube support structures, experienced during nuclear power plants operation. While the Archard model has generally been used for the prediction of fretting wear in SG tube, it is limited by its linear nature. In this study, we introduced an "Impact Shear Work-rate" (ISW) model, which takes into account the combined effects of impact and sliding. The ISW model was evaluated using existing experimental data on fretting wear in SG tube and was compared against the Archard model. The prediction results using the ISW model were more accurate than those using the Archard model, particularly for impact forces.

• 대한기계학회논문집A
• /
• 제20권11호
• /
• pp.3560-3572
• /
• 1996

This paper presents a new discrete-time fuzzy-sliding mode controller for robust vibration control of a smart structure featuring a piezofilm actuator. A governong equation of motion for the smart beam structure is derived and discrete-time codel with mismatched uncertainties such as parameter variations is constructed ina state space. A discrete-time sliding mode control system consisting of an equivalent controller and a discontinuous controller is formulated. In the design of the equivalent part, so called an equivalent controller separation method is adopted to achieve vzster convergence to a sliding surface without extension of a sliding region, in which the system robustness maynot be guaranteed. On the other hand, the discontinuous part is constructed on the basis of both the sliding and the convergence conditions using a time-varying feedback gain. The sliding moide controller is then incorporated with a fuzzy technique to appropriately determine principal control parameters such as a discountinuous feedback gain. Experimental implementation on the forced and random vibraiton controls is undertaken in order to demonstrate superior control performance of the proposed controller.

• 한국철도학회논문집
• /
• 제10권6호
• /
• pp.772-778
• /
• 2007

곡선통과 새마을호 열차의 마모 특성을 평가하기 위하여 다량 편성 해석모델이 사용된다. 이 모델과 ADAMS/Rail를 사용하여 마모 특성과 관련된 변수의 변화에 따른 민감도 해석이 수행된다. 저속에서 우측 차륜의 마모도와 미끄럼도가 좌측 차륜보다 높으나, 고속의 경우는 좌측 차륜이 우측 차륜보다 높다. 곡선반경의 감소에 따라 마모도와 미끄럼도가 증가한다. 완화곡선의 길이가 증가하련 마모도와 미끄럼도가 증가한다. 또한 캔트가 증가하면 마모도와 미끄럼도가 증가한다.

• 한국전산구조공학회논문집
• /
• 제20권2호
• /
• pp.147-155
• /
• 2007

본 논문에서는 수정 슬라이딩 모드제어기의 비선형 이력구조물의 지진응답 제어성능이 평가되었다. 수정 슬라이딩모드 제어는 제어력을 계산하기 위해 Lyapunov함수의 목표변화율을 이용하는 기법으로 기존 연구에서는 선형구조물에 대한 성능만이 조사되었다. 그러나 강진시 대부분의 구조물은 비선형 거동을 보인다는 점을 고려할 때 기존 연구의 결과는 실제 적용에 있어 제한점을 가지고 있다. Bouc-Wen 모델을 사용하여 구조물의 비선형 거동을 모델링 하였으며, 이력이선형 단자유도 구조물에 대한 통계해석과 비선형이력 면진구조물에 대한 해석결과는 제안된 수정 슬라이딩모드 제어알고리즘이 기존의 슬라이딩모드 제어기보다 우수한 성능을 가짐을 보여준다.

• 한국정밀공학회지
• /
• 제19권9호
• /
• pp.157-165
• /
• 2002

The design of hydraulic & control system has been developed for the disc spinning machine. The hydraulic system has been designed in the overall system including the vertical & horizontal slide fur spinning works which are controlled by hydraulic servo valves in right & left side, and the clamping slide for holding & pressing blank material in center during spinning process. Based on the design concept of this hydraulic system, model test experiments for hydraulic servo control system is tested to conform confidence and applying possibility. The control system is introduced with the fuzzy-sliding mode controller for the hydraulic force control reacting force as a disturbance, because a fuzzy controller does not require an accurate mathematical model for the generation of nonlinear factors in the actual nonlinear plant with unknown disturbances and a sliding controller has the robustness & stability in mathematical control algorithm. We conform that the fuzzy-sliding mode controller has a good performance in force control for the plant with a strong disturbance. Also, we observe that a steady state error of the fuzzy-sliding mode controller can be reduced better than those of an another controllers.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 D
• /
• pp.1168-1170
• /
• 1997

In this paper, the sliding mode-model following(SM-MF) power system stabilizer(PSS) including closed-loop feedback(CLF) for single machine system is extended to multimachine system. Simulation results show that the SM-MF multimachine stabilizer is able to achieve asymptotic tracking error between the reference model state and the controlled plant state at different initial conditions.