• Journal of Advanced Marine Engineering and Technology
• /
• v.17 no.1
• /
• pp.26-32
• /
• 1993

The loads exerted on electro-hydraulic servo system are classified into inertial, viscous, and spring load. The additional load called disturbances is also exerted on system but is generally not modeled. To deal with these kinds of loads, it is necessary to maintain the continuous signal transfer, so we can construct compensator to satisfy control specifications using feedback signal such as displacement, velocity, acceleration and pressure known as state variables. In case of controlling the speed of hydraulic motor, we must keep up robust performance for the various loads and disturbances acted on the system. However, the load flow rate in the valve is characterized by nonlinearity so that traditional theory of linear control could not be expected to give the desired performance. In this paper, it is shown that speed controller of hydraulic motor gives a good command following and disturbance rejection performance by applying sliding mode theory as a way of robust control to the nonlinearity, variation of loads and disturbances.

• International Journal of Automotive Technology
• /
• v.7 no.7
• /
• pp.803-812
• /
• 2006

In order to reduce the negative effects of dynamic coupling among vehicle subsystems and improve the handling performance of vehicle under severe driving conditions, a vehicle chassis control integration approach based on a main-loop and servo-loop structure is proposed. In the main-loop, in order to achieve satisfactory longitudinal, lateral and yaw response, a sliding mode controller is used to calculate the desired longitudinal, lateral forces and yaw moment of the vehicle; and in the servo-loop, a nonlinear optimizing method is adopted to compute the optimal control inputs, i.e. wheel control torques and active steering angles, and thus distributes the forces and moment to four tire/road contact patches. Simulation results indicate that significant improvement in vehicle handling and stability can be expected from the proposed chassis control integration.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.11a
• /
• pp.743-748
• /
• 2008

This paper presents an inertia type of piezostack based active mount for unmanned aero vehicle (UAV) camera system. After identifying the stiffness and damping properties of the rubber element and piezostack a mechanical model of the active mount system is established. The governing equation of mount is them derived and expressed in a state space farm. Subsequently, a sliding mode controller which is robust to uncertain parameters is designed in order to reduce the vibration imposed according to the military specification associated with UAV camera mount system operation. Control performances such as acceleration and transmitted force are evaluated through both computer simulation and experimental implementation.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.422-427
• /
• 2006

This paper presents force-feedback control performance of a haptic device in virtual environment of minimally invasive surgery(MIS). As a first step, based on an electrorheological(ER) fluid and spherical geometry, a new type of master device is developed and integrated with a virtual environment of MIS such as a surgical tool and human organ. The virtual object is then mathematically formulated by adopting the shape retaining chain linked(S-Chain) model. After evaluating reflection force, computational time, and compatibility with real time control, the virtual environment of MIS is formulated by interactivity with the ER haptic device in real space. Tracking control performances for virtual force trajectory are presented in time domain, and theirtrackingerrorsareevaluated.

• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.552-554
• /
• 1991

In this paper is applied Sliding Mode method to position control system with Permanent Magnetic Synchronous Motor (PMSM), with realized a Digital Controller with Micro-Processor. And also, this paper proposes an Algorithm to compen-sate chattering of torque current to added controled parameter to continuous function of torque current.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.339-342
• /
• 2004

The x-y table of the SFFS to move a printer head must be the system that has a high speed and accuracy. So we propose the SMCSPO algorithm on the timing belt system. The major contribution is the design of a robust observer for the state and the perturbation of the timing belt system, which is combined with a robust controller. The control performance of the proposed algorithm is compared with PD control by the experiments. The results of SMCSPO algorithm showed more accuracy and better performance than PD control. Therefore we may apply the algorithms to a high speed and accuracy control for SFFS.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2001.12a
• /
• pp.145-148
• /
• 2001

일반적으로 가변구조제어는 외란과 변수 변화에 대해 강인한 특성을 가지지만 제어기 설계자는 이러한 값들에 대한 상한 값과 하한 값을 알아야한다. 그러나 때로는 이러한 상한 값과 하한 값을 얻는다는 것은 쉽지가 않다. 이에 반해 퍼지제어기는 외란과 변수 변화에 대한 제어기 설계에 있어서 효과적인 방법을 제공한다. 따라서 퍼지제어기와 가변구조제어기가 가지는 장점들을 결합하는 연구가 진행되어져 왔다. 본 논문에서는 기존의 선형 슬라이딩 면을 가지는 퍼지제어기를 이용하는 방법 대신 비선형 슬라이딩 면을 가지는 퍼지제어기를 이용한 적응 퍼지 가변구조제어기를 이용하였다. 따라서 시스템의 결과는 선형 슬라이딩 면을 가지는 제어기 설계에서 나타나는 동적 특성과 정적 특성의 대립을 해결할 수 있다. 또한, 가변구조제어의 동적 특성을 결정하는 제어입력을 도입하여 적응 퍼지 가변구조제어기의 안정도를 판명하였다. 제안된 제어 알고리듬의 유용성을 입증하기 위해 비선형성이 큰 가변 길이를 갖는 진자 시스템을 이용하였다.

• Proceedings of the KIEE Conference
• /
• 1994.07a
• /
• pp.465-467
• /
• 1994

A VSC with Inertial COFB(Coordinate-Operator Feedback) is presented for chattering alleviation. Athought the conventional sliding mode controller has good properties of robustness for disturbances or parameter variations, fast response, and easy implementation, there exists an inevitable chattering problem which deteriorates the control performance of system. VSC using Inertial COFB has properties of bounded feedback gain, reduced chattering, and robustness for disturbances or parameter variations. The validity of the proposed method is demonstrated through computer simulation for a position control of BLDCM.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.12 s.117
• /
• pp.1286-1293
• /
• 2006

This paper presents force-feedback control performance of a haptic device in virtual environment of minimally invasive surgery(MIS). As a first step, based on an electrorheological (ER) fluid and spherical geometry, a new type of master device is developed and integrated with a virtual environment of MIS such as a surgical tool and human organ. The virtual object is then mathematically formulated by adopting the shape retaining chain linked(S-chain) model. After evaluating reflection force, computational time, and compatibility with real time control, the virtual environment of MIS is formulated by interactivity with the ER haptic device in real space. Tracking control performances for virtual force trajectory are presented in time domain.

• Proceedings of the KIPE Conference
• /
• 2012.11a
• /
• pp.101-102
• /
• 2012

본 논문에서는 3상 승압형 정류기를 위한 슬라이딩모드 기반의 센서리스 직접전력제어방법을 제안한다. 공간벡터변조방식을 이용한 직접전력제어기법은 히스테리시스 제어기를 사용한 방법에 비해 스위칭 주파수가 일정하게 유지되어 시스템 안정성은 향상되지만, 응답속도가 떨어지는 단점이 있다. 제안하는 방법은 센서리스 기법을 이용하여 전압 센서를 제거하였고, 슬라이딩모드 제어기를 이용하여 시스템의 응답속도를 개선하였다. 3상 승압형 정류기의 시뮬레이션 결과를 통해 제안하는 제어기법의 타당성을 검증한다.