• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2005년도 연구개발 발표회 논문집
• /
• pp.722-731
• /
• 2005

• 대한기계학회논문집A
• /
• 제41권2호
• /
• pp.157-164
• /
• 2017

패러럴 슬라이드 게이트밸브는 복합발전플랜트 배열회수보일러와 증기터빈 사이에 위치하여 증기유동의 흐름을 제어하는 밸브로서 운전기간 동안 기동, 부하변동 및 정지 등의 운전이 반복적으로 이루어진다. 따라서, 각 기동운전 중에 밸브 두께 방향의 온도 차이로 인하여 발생하는 큰 압축 열응력으로 인한 피로손상 및 구조건전성에 대한 평가가 필요하다. 본 논문에서는 배열회수보일러의 주중기 밸브로 설치되는 16인치 패러럴 슬라이드 게이트밸브의 피로수명 평가를 위한 열구조해석 및 ASME B&PVC VIII-2에서 제시된 탄성응력해석 및 등가응력에 기반한 피로수명 평가를 수행하였다.

• 한국철도학회논문집
• /
• 제9권2호
• /
• pp.230-236
• /
• 2006

For a short-term measurement to reduce an accident on a railroad crossing, it is necessary to find out the weakness and problems of existing equipment in the railroad transportation system. The analysis of railroad crossing accidents shows that main causes of accidents (24.9%) are the careless driving including an engine problem, damage on the safety equipment, slide on the snow, and an engine stop on the railroad crossing. Therefore, it is required to install a sensor, or to make a crossing gate at the exist for detecting obstacles on a railroad to prevent collisions among trains. This paper suggests 'a panel sensor using the strain gauge' to make up the weaknesses of the sensing Dead Zone, which are caused by using a laser method, and to detect any small objects passing railroads in order to reduce the errors, which are occurred in the earth magnetic field for controlling Exit Slide Crossing Arm Detector. The device, suggested in this paper, is verified with detecting any small objects passing the railroad, with judging entry decision clearly, and with controlling passing gate and obstruction warnings/cautions obstacles at the same time, through an experimental test.

• 한국조경학회지
• /
• 제27권1호
• /
• pp.110-121
• /
• 1999

The purpose of this study is to focus on the characteristics of the form and preference of the main gates of universities. The gate of a university have both functions and artistic design aspects. Fifty-two universities selected for this study were placed all around country except for Je-ju island. The following two research methods were used for this study. 1) an analysis of form character through a classification of the types. 2) and analysis of preference to the gates through a side show. The results are summarized as follows: 1. Main gates of universities were classified by covered-type and uncovered-type in existence of cover. And they were classified by eighteen types in detail. 2. Visual preference have been analyed by using the regression, the result is as follows: Y=-0.357+0.630 X$_4$+0.377X$_1$+0.075X$_2$-0.015X$_3$($R^2$=0.971, X$_4$;harmony, X $_1$;speciality, X$_2$;softness, X$_3$;complex) 3. The gate of Chung-Ang university(Ahn Sung campus) is the highest of all the universities at the average of preference 4.32 through result of slide show. Covered type has a higher preference than uncovered type. This has a good modification and decoration in front side type of main gate.

• Korean Chemical Engineering Research
• /
• 제50권3호
• /
• pp.492-498
• /
• 2012

본 연구에서는 고온고압 건식탈황장치를 이용하여 고체순환량과 탈황반응기 내의 공극률에 대한 수력학적특성을 파악하고, 아연계 탈황제의 고온고압 조건에서 탈황반응온도에 대한 반응특성 및 연속운전을 통한 탈황 효율을 분석하였다. 실험에 사용된 고온고압건식탈황장치는 고속유동층 형태의 탈황반응기(내경: 0.015 m, 높이: 6.2 m), 기포유동층 형태의 재생반응기(내경: 0.053 m, 높이: 1.6 m), 가스의 역흐름을 방지하는 loop-seal, 두 반응기 후단에 압력컨트롤밸브로 구성되어있다. 수력학 특성으로는 고체순환밸브 개구비, 탈황반응기 가스 유속, 탈황반응기 온도 변화에 따른 고체순환량과 각 조건에서의 고속유동층 형태의 탈황반응기 높이에 따른 공극률 분포를 알아보았다. 고체순환량은 동일한 유속조건, 동일한 고체순환밸브 개구비에서 탈황반응기 온도가 상온일 때보다 $300^{\circ}C$와 $550^{\circ}C$일 때 감소하였으며 $300^{\circ}C$와 $550^{\circ}C$ 조건에서는 큰 차이가 없었다. 탈황반응기내의 공극률은 고체순환밸브 개구비가 10~20%로 고체순환량이 적은 경우 고속유동층 형태의 공극률 분포를 보이고, 30~40%로 고체순환량이 많아지는 경우 탈황반응기 하부에서 turbulent 형태의 공극률의 분포를 나타냈다. 아연계 탈황제의 탈황반응온도에 따른 반응특성은 시스템 압력 20 atm, 연속 반응 조건에서 탈황 온도를 변화시키면서 살펴보았다. 일정한 고체순환 조건에서 탈황온도 $450^{\circ}C$ 이하에서 탈황 효율 저하가 시작되는 것을 확인하였으며, 높은 탈황 효율을 유지시키기 위하여 10시간 연속운전에서는 탈황 반응 온도를 $500^{\circ}C$로 설정하여 실험하였다. 실험 결과, 10시간 연속운전을 통해, 유입 $H_2S$ 농도 5,000 ppmv 조건에서 탈황 반응기 후단 $H_2S$ 농도는 UV분석기(Radas2)와 검지관(GASTEC)의 검출한계인 1 ppmv 이하를 유지하여 $H_2S$ 제거 효율 99.99% 이상을 달성하였다.

• 한국생산제조학회지
• /
• 제21권2호
• /
• pp.214-220
• /
• 2012

About 12 million people of the mobility handicapped were increased by the end of 2009 year. Universal design concept has been implemented in developed countries. Since 2004 low-floor buses are in Korea. In this study, there is no provision for mobility handicapped and small buses that can be comfortable riding car ramp design presented. The gate of a small buses lowered height of 200mm. Install the ramp in the center of the ramp by an air cylinder moves from side to side. The slope of the ramp was controlled by a hinge. Air cylinder thin type applicable in the narrow space of the slide cylinder was used.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.212-215
• /
• 2005

The needs of larger screen in mobile device would be increased as the time of ubiquitous and convergence is coming. And, the type of mobile device has been evolved from bar, slide to row. Recently, the study on the multi-display screen which has seamless gap between two display panel has been published, and moreover the System On Chip(SOC) design strategy of core chip has been the most promising Field-Programmable Gate Array(FPGA) technology in the display system. Therefore, in this paper, we proposed the design technique of SOC and evaluated the effectiveness with Very high speed Hardware Description Language(VHDL) Intellectual Property (IP) for the operation of multi display device driver. Also, This IP design would be to allow any kind of user interface in control system.

• Structural Engineering and Mechanics
• /
• 제51권3호
• /
• pp.471-485
• /
• 2014

Until now, the finite corner stiffness of the right-angle frames used as horizontal girders in a bonnet, have not been considered during the design process to result in not a precise result. This paper presents a design equation set for right-angle frames used as horizontal girders in a bonnet assuming rigid corner stiffness. By comparing the center stresses of the right-angle frame according to the design equation set with the results of the finite element method, the master curves for the empirical corner stiffness can be determined as a function of slenderness ratio. A second design equation set for a right-angle frame assuming finite corner stiffness was derived and compared with the first equation set. The master curves for the corner stiffness and the second design equation set can be used to determine the design moments at the centers of the girder so that the bending stresses can be analyzed more precisely.