• Structural Engineering and Mechanics
• /
• 제20권3호
• /
• pp.313-334
• /
• 2005

The paper presents a new approach for the analysis of slope stability that is based on the numerical solution of a differential equation, which describes the thrust force distribution within the potential sliding mass. It is based on the evaluation of the thrust force value at the endpoint of the slip line. A coupled approximation of the slip and thrust lines is applied. The model is based on subdivision of the sliding mass into slices that are normal to the slip line and the equilibrium differential equation is obtained as the slice width approaches zero. Opposed to common iterative limit equilibrium procedures the present method is straightforward and gives an estimate of slope stability at the value of the safety factor prescribed in advance by standard requirements. Considering the location of the thrust line within the soil mass above the trial slip line eliminates the possible development of a tensile thrust force in the stable and critical states of the slope. The location of the upper boundary point of the thrust line is determined by the equilibrium of the upper triangular slice. The method can be applied to any smooth shape of a slip line, i.e., to a slip line without break points. An approximation of the slip and thrust lines by quadratic parabolas is used in the numerical examples for a series of slopes.

• Journal of information and communication convergence engineering
• /
• 제13권4호
• /
• pp.275-279
• /
• 2015

There are several methods to record three dimensional (3D) information of objects such as lens array based integral imaging, synthetic aperture integral imaging (SAII), computer synthesized integral imaging (CSII), axially distributed image sensing (ADS), and axially distributed stereo image sensing (ADSS). ADSS method is capable of recording partially occluded 3D objects and reconstructing high-resolution slice plane images. In this paper, we present a computational method for depth extraction of partially occluded 3D objects using ADSS. In the proposed method, the high resolution elemental stereo image pairs are recorded by simply moving the stereo camera along the optical axis and the recorded elemental image pairs are used to reconstruct 3D slice images using the computational reconstruction algorithm. To extract depth information of partially occluded 3D object, we utilize the edge enhancement and simple block matching algorithm between two reconstructed slice image pair. To demonstrate the proposed method, we carry out the preliminary experiments and the results are presented.

• Applied Microscopy
• /
• 제42권4호
• /
• pp.200-206
• /
• 2012

Induction of neurogenesis can occur in the hippocampus in response to various pathological conditions, such as Alzheimer's disease. The aim of this study was to investigate the changes that occur in endogenous neural stem cells in response to amyloid beta $(A{\beta})_{25-35}$-induced neuronal cell damage in organotypic hippocampal slice cultures. Cresyl violet staining and Fluoro-Jade B staining were used to detect neuronal cell damage and changes of mossy fiber terminals were observed by Timm's staining. The immunofl uorescence staining was used to detect the newly generated cells in the subgranular zone (SGZ) of the dentate gyrus with specific marker, 5-bromo-2'-deoxyuridine (BrdU), Ki-67, Nestin, and doublecortin (DCX). In compared to control slices, neuronal cell damage was observed and the mossy fibers were expanded to CA3 area by treatment with $A{\beta}_{25-35}$. Ki-67/Nestin- and BrdU/DCX-positive cells were detected in the SGZ. In conclusion, these results demonstrate that $A{\beta}$-induced neuronal damage results in an increase in endogenous neural stem cells in rat hippocampal slice cultures not only for gliosis but also for neurogenesis.

• 동의신경정신과학회지
• /
• 제21권1호
• /
• pp.43-57
• /
• 2010

Objectives: This study was designed to assess neuroprotective effects of herb medicine against Alzhheimer's disease related brain damage in organotypic hippocampal slice culture. Methods: We induced dementia related brain damage in organotypic hippocampal slices by $\beta$-amyloid. Those slices were treated with herb medicines - Hwangryeonhaedoktang, Sopungsoongiwon. Using by PI staining, the extents of cell death were assessed. After that, we selected the best effective one among those herb medicines and the major components of that medicine were studied to reveal neuroprotective effects and related proteins by using PI stating. Results: In PI staining, Sopungsoongiwon is the best effective herb medicine between Hwangryeonhaedoktang and Sopungsoongiwon. Notopterygii Rhizoma, Corni Fructus, Areca Catechu, Aurantii Fructus Immaturus, Plantaginis Semen is the best effective one among the components of Sopungsoongiwon. Conclusions: We suggested that purgative effect would be the best effetive medicine on dementia related brain damage between clearing heat and toxic materials.

• 한국통신학회논문지
• /
• 제34권10C호
• /
• pp.975-982
• /
• 2009

본 논문에서는 저연산, 저지연성을 보장하는 다중 비디오 스트림 흔합 알고리즘을 제안한다. 제안된 알고리즘은 슬라이스기반 H.264/AVC 비디오 스트림들을 화소 도메인에서 혼합하지 않고 압축 도메인에서 신택스 비트스트림 변경에 의해 혼합한다. 혼합을 위한 신택스 비트스트림 변환은 혼합화면을 구성할 비디오 스트림들의 위치에 따라 변경한다. 실험결과 4개 이상의 비디오 스트림들을 고속으로 혼합할 수 있었다. 또한 표준 H.264/AVC를 지원하는 플레이어에서 화질열화 없이 재생할 수 있었다.

• Journal of Welding and Joining
• /
• 제10권2호
• /
• pp.43-50
• /
• 1992

This study was aimed at resolving uncertainties about lamellar tearing initiation temperatures and studying the effect of nonmetallic inclusions on the tear initiation. In order to measure the lamellar tearing initiation temperature, the slice bend test was conducted in the temperature range of 20.deg.C to 425.deg.C on A572 Grade 50 and A588 Grade A steels. In addition, the weld restrain test was carried out to measure directly the tear initiation temperature with A572 steel. In slice bend tests, A572 steel showed the most susceptible region to lamellar tearing to be in the range of 100 to 300.deg.C, where the steel showed the minimum ductility. The observed tear initiation by the weld restraint test was to be in the range of 200to 300.deg.C. The tears became narrower and less rounded at the susceptible temperatures. It was confirmed in this study that lamellar teraring initiated during cooling from welding in the range of 200 to 300.deg.C and they were initiated by strain aging embrittlement.

• 대한의용생체공학회:의공학회지
• /
• 제20권3호
• /
• pp.283-290
• /
• 1999

Mr(Magnetic Resonance ) 영상은 인체 기관의 상태에 관한 많은 정보를 가지고 있어 이것을 분석하여 가시화하면 의료 진단에 유용하게 이용될 수 있다. MR 영상의 가시화는 영상의 획득, 전처리, 조직 분류, 보간, 렌더링의 단계로 이루어진다. 이 단계 중 Mr 영상의 불완전성 때문에 현재 조직 분류 및 보간이 문제로 되어 있다. 본 논문에서는 머리 MR 영상을 대상으로 조직 분류 및 보간에 대한 기법을 제안하고 제안된 기법을 바탕으로 뇌를 3차원 가시화한다. 조직 분류 기법에서는 뇌조직 성분 구성 등 임상 실험에 의해 밝혀진 뇌에 대한 구조적인 지식을 단계적으로 이용한다. 보간 기법은 오목 윤곽선에 사용할 수 있게 동적 탄성 보간기법을 개선하였다. 제안한 구조적인 분류 기법 및 보간 기법을 다른 기법과 비교 평가한다.

• 한국CDE학회논문집
• /
• 제7권3호
• /
• pp.148-156
• /
• 2002

Most Rapid Prototyping (RP) processes adopt a solid Computer Aided Design (CAD) model, which will be sliced into thin layers of constant thickness in the building direction. Each cross-sectional layer is successively deposited and, simultaneously, bonded onto the previous layer; and eventually the stacked layers from a physical part of the model. A new RP process, the transfer-type Variable Lamination Manufacturing process using expandable polystyrene foam sheet (VLM-ST), has been developed to reduce building time and to improve the surface finish of parts with the thick layers and a sloping surface. This paper describes the generation of Unit Shape Layer (USL), the cutting path data of the linen. hotwire cutter for the VLM-ST process. USL is a three-dimensional layer with a thickness of more than 1 mm and a side slope, and it is the basic unit of cutting and building in the VLM-ST process. USL includes data such as layer thickness, positional coordinates, side angles of each layer, hotwire cutting speed, the heat input to the hotwire, and reference shape. The procedure of generating USL is as follows: (1)Generation of the mid-slice from the CAD model, (2)Conversion of the mid-slice into a simply connected domain, (3)Generation to the reference shape for the mid-slice, (4)Calculation of the rotation angle of the hotwire of the cutting system.

• Journal of Information Processing Systems
• /
• 제6권4호
• /
• pp.537-552
• /
• 2010

Software Debugging is the most time consuming and costly process in the software development process. Many techniques have been proposed to isolate different faults in a program thereby creating separate sets of failing program statements. Debugging in parallel is a technique which proposes distribution of a single faulty program segment into many fault focused program slices to be debugged simultaneously by multiple debuggers. In this paper we propose a new technique called Faulty Slice Distribution (FSD) to make parallel debugging more efficient by measuring the time and labor associated with a slice. Using this measure we then distribute these faulty slices evenly among debuggers. For this we propose an algorithm that estimates an optimized group of faulty slices using as a parameter the priority assigned to each slice as computed by value of their complexity. This helps in the efficient merging of two or more slices for distribution among debuggers so that debugging can be performed in parallel. To validate the effectiveness of this proposed technique we explain the process using example.

• 스마트미디어저널
• /
• 제5권1호
• /
• pp.49-54
• /
• 2016

Medical image processing is a compulsory process to diagnose many kinds of disease. Therefore, an automatic algorithm for this task is highly demanded as an important part to construct a computer-aided diagnosis system. In this paper, we introduce an automatic method to segment the liver region from 3D abdominal CT images using Otsu method. First, we choose a 2D slice which has most liver information from the whole 3D image. Secondly, on the chosen slice, we enhanced the image based on its intensity using Otsu method with multiple thresholds and use the threshold to enhance the whole 3D image. Then, we apply a liver mask to mark the candidate liver region. After that, we execute the Otsu method again to segment the liver region from the chosen slice and propagate the result to the whole 3D image. Finally, we apply preprocessing on the frontal side of 3D images to crop only the liver region from the image.