• 제목/요약/키워드: slender spindle

검색결과 14건 처리시간 0.022초

키큰방추형 '후지'/M.9 사과나무의 영양생장, 생산성 및 과실품질 (Vegetative Growth, Productivity, and Fruit Quality in Tall Spindle of 'Fuji'/M.9 Apple Trees)

  • 양상진;사공동훈;윤태명;송양익;박무용;권헌중
    • 원예과학기술지
    • /
    • 제33권2호
    • /
    • pp.155-165
    • /
    • 2015
  • 우량 측지묘(측지수 : 10개 이상)를 $3.0{\times}1.0m$ 거리로 심고 수고를 2.5m 정도로 한 세장방추형과 수고를 3.5m로 높인 키큰방추형으로 키우면서 8년간 수체생장, 생산성 및 과실품질을 비교하였다. 재식 4년차에 키큰방추형의 수관용적이 세장방추형보다 커지기 시작하여 5년차에는 주당 수관용적이 키큰방추형은 세장방추형에 비해 25% 정도 더 컸다. 8년 동안의 10a당 누적수량은 키큰방추형이 세장방추형에 비해 14% 정도 증수되었다. 더군다나 재식 5년차 이후로 두 시험구 모두 해거리 및 갈색무늬병이 발생하여, 수세가 종종 불안정하였는데, 키큰방추형의 생산량 감소 및 수세 불안정 정도는 세장방추형보다 덜하였다. 가용성고형물 함량과 착색은 재식 5년차에 키큰방추형이 세장방추형보다 증가하였는데, 이는 키큰방추형의 측지 및 착과가 세장방추형보다 균일하게 배치되면서 수관 내 광투과율이 증가되었기 때문으로 생각되었다. 결론적으로 국내에서 '후지'/M.9 사과나무를 333주/10a 이상으로 재식할 경우 세장방추형의 수고를 3.5m로 높이는 것이 광투과율, 생산량 및 과실품질 측면에서 관행의 세장방추형보다 나을 것으로 판단되었다.

'홍로'/M.9 사과나무의 세장방추형에서 수고가 투광율, 투약율, 수체 생육 및 과실 품질에 미치는 영향 (Effect of Tree Height on Light Transmission, Spray Penetration, Tree Growth, and Fruit Quality in the Slender-spindle System of 'Hongro'/M9 Apple Trees)

  • 최동근;송주희;강인규
    • 원예과학기술지
    • /
    • 제32권4호
    • /
    • pp.454-462
    • /
    • 2014
  • '홍로'/M.9 사과나무 세장방추형의 생산성을 높이기 위하여 수고에 따른 투광율, 투약율, 수체생육, 과실 품질, 그리고 노동 생산성을 비교 분석하였다. 수고가 높을수록 수관내부, 특히 낮은 수관위치에서의 투광률은 감소하였다. 엽면적지수(LAI)는 수고가 높을수록 증가하였으나 엽면적지수의 증가는 수관 내부 농약 살포 효과를 감소시켰다. 신초 생장은 수고가 높을 때 가늘고 길게 자라는 경향이었고, 과실의 착색도는 수고가 높을 때 감소하였으나, 과실 경도와 산함량은 차이가 없었다. 수고가 높을 때 주당 착과수는 증가하였으나, 305g 이상의 대과 생산량은 감소하였다. 수고가 높아질수록 적화, 적과, 전정, 수확 등에 필요한 노동력은 증가하였으나, 높은 수고에서의 노동력 증가는 고소작업차를 투입하여 해결할 수 있었다. 4.5m 수고에서 적화 작업의 경우 사다리보다 전동고소작업차를 이용했을 때 작업시간은 14.6분/주가 절약되었다. 투광율 향상과 과실착색도 증진을 위하여 수관내부의 광환경 개선이 필요함을 알 수 있다.

원통연삭 실험자료를 이용한 트래버스 연삭공정중의 형상예측 (Prediction of Form Accuracy during Traverse Grinding of Slender Workpiece Using the Cylindrical Prunge Grinding Data)

  • 박철우;이상조
    • 한국정밀공학회지
    • /
    • 제17권3호
    • /
    • pp.174-183
    • /
    • 2000
  • Non-Parallelism the axial direction occurs during grinding process of long slender shafts. The reason for the axial error is due to elastic deformation of the components, accumulation phenomenon of the grinding and wheel wear during the grinding process. The accumulation phenomenon, the size generation mechanism and the wheel wear process during traverse grinding result in complicated process at each step on the wheel surface. The grinding system stiffness obtained from the stiffness of the center on the tailstock and the workpiece varing according to the relative position of the wheel and the workpiece. Further more, the value of wheel wear increases as the grinding process advances. The above mentioned issues make the shape generation process during traverse grinding quite complicated. This research analyzes the shape generation process in the direction of the work spindle. First, the formulation of the grinding system stiffness was conducted and the simulation analysis method of the traverse grinding was established. Also, a measuring system for assessing the dimensinal accuracy of the workpiece has been developed.

  • PDF

'Fuji'/M.9 사과나무에 있어 세장방추형의 수고가 영양생장, 생산성 및 노동력에 미치는 영향 (Influence of Tree Height on Vegetative Growth, Productivity, and Labour in Slender Spindle of 'Fuji'/M.9 Apple Trees)

  • 양상진;박무용;송양익;사공동훈;윤태명
    • 생물환경조절학회지
    • /
    • 제18권4호
    • /
    • pp.492-501
    • /
    • 2009
  • 재식거리 $3.2{\times}1.2m$로 심어 수고 2.5m의 세장방추형으로 관리해 오던 '후지'/M.9 사과나무를 재식 6년차부터 2년 동안 수고 4.0m로 관리하였다. 이후 재식 8년차에 수고를 2.5m(대조구), 3.0m, 3.5m, 4.0m로 조절하고 수고에 따른 2년간의 생산성 및 노동력을 비교하였다. 대조구인 수고 2.5m를 기준으로 하여 처리에 따른 10a당 생산량을 비교해 보면 첫해에는 수고 4.0m, 3.5m, 3.0m에서 각각 46%, 25%, 4%, 2년차에는 17%, 12%, 10% 증가하였다. 수고에 따른 과실 품질에 있어서는 가용성 고형물 함량은 2개년 모두 수고 2.5m가 가장 높았으나, 착색정도는 수고에 따른 뚜렷한 차이가 없었다. 노동력은 수고가 높아질수록 증가하였으나, 노동력에 따른 과실생산량은 수고가 낮을수록 증가하였다. 조수입과 순수입은 2005년의 경우 수고가 높아질수록 증가하였으나, 2006년은 수고 2.5m가 가장 높았지만 통계적 유의차는 없었다. 따라서 수고에 따른 생산성, 노동력, 경제성을 고려해 볼때 적정수고는 3.0~3.5m인 것으로 판단되었다.

다중 박 원판을 갖는 유연 회전축계의 유한 요소 및 실험적 모드 해석 (Finite Element and Experimental Modal Analyses of Multiple Thin-Disked Flexible Spindle Systems)

  • 임승철;제인주
    • 소음진동
    • /
    • 제9권5호
    • /
    • pp.1029-1035
    • /
    • 1999
  • This paper relates to the flexural vibration analysis of slender spindle systems with multiple thin disks, supported by the ball bearings by means of the finite element method. Each system component is analytically modeled taking into account its flexibility and also the centrifugal effect especially for the disk. In order to show the rapid convergence rate and accuracy of the proposed approach, an experimental set-up is built to be versatile. In two distinct cases, its natural modes are numerically computed using only a small number of total element meshes as the shaft rotational speed is varied, and verified through experimental frequency response function obtained by the impact test.

  • PDF

후두의 유육종암 1 예 - 광학 및 전자현미경적 연구 - (Sarcomatoid Carcinoma of the Larynx -A Case Report with Light and Electron Microscopic Study -)

  • 이상숙;정재홍;박준식
    • 대한두경부종양학회지
    • /
    • 제2권1호
    • /
    • pp.67-73
    • /
    • 1986
  • An unusual polypoid laryngeal tumor has been studied with light and electron microscopy. In light microscopic section, there were two components: a squamous cell carcinoma and a sarcomatoid spindle cell population. Transitional zone between these two components was found. The electron micrographs demonstrated the presence of slender bundles of tonofilaments in many tumor cells. Desmosomes were present, but few in number and poorly developed. Findings suggest this laryngeal tumor as a spindle cell variant of squamous cell carcinoma.

  • PDF

'후지' 사과나무 세장방추형에서 하단측지수가 수체생육에 미치는 영향 (Enfluence of the Number of the Lower Scaffold Limbs in Slender Spindle Form on the Tree Growth and Development of 'Fuji' Apple Trees)

  • 박무용;양상진;박정관;최동근;강인규
    • 생물환경조절학회지
    • /
    • 제16권3호
    • /
    • pp.258-263
    • /
    • 2007
  • '후지'/M.9에 대한 세장방추형에 적합한 하단측지수 구성을 위하여 하단측지수를 달리하여 수체생육, 광환경, 수량 및 과실품질을 조사하였다. 하단측지수준별 생육은 하단측지수를 5개로 유지했을 때 수폭은 넓었고, 신초장 및 정단신초장은 증가하였다. 수관위치별 수광률은 하단측지수가 5개인 처리구에서 수관상부(지상 150cm)와 수관중부(지상 100cm)에서는 높은 경향을 보였다. 총 단과지 화아수는 측지수에 따라 차이가 없었으나, 수관위치별로 보면 수관하부(지상 120cm 이하)에서 하단측지수가 5개 처리에서 가장 많았으며, 화아의 횡경도 커지는 경향이었다. 과실수량은 하단측지수가 5개에서 가장 많았고, 과중은 하단측지수가 5개와 8개에서 증가하는 경향이었다. 과실특성은 과형지수, 경도, 산함량, Hunter L, b값은 수관위치와 측지수준에 따라 차이가 없었으나, 가용성고형물 함량은 하단측지수가 5개일 때 높았다. 과실의 착색도를 나타내는 Hunter a값은 수광률이 가장 높은 하단측지수를 5개로 유지한 처리구에서 가장 높게 나타났다.

세장방추형 '홍로' 사과나무의 수관 부위별 수광상태와 잎 및 과실의 특성 (Light Conditions and Characteristics of Leaves and Fruit at Different Canopy Positions in Slender-spindle 'Hongro' Apple Trees)

  • 송주희;강인규;최동근
    • 원예과학기술지
    • /
    • 제32권4호
    • /
    • pp.440-447
    • /
    • 2014
  • '홍로'/M.9 세장방추형 수형에서 수관위치에 따른 광환경과 잎과 과실의 특성을 구명하기 위하여 수관을 상부와 하부, 그리고 내부와 외부로 나누어 조사하였다. 수관상단의 외부가 투광량이 가장 높았고, 광합성속도는 수관하단의 내부보다 약 4.5배 높게 나타났다. 잎의 생장은 수관 내부 잎이 외부 잎보다 더 넓고 얇았으며, 잎의 책상조직 첫번째 층의 두께는 수관외부($110.3{\mu}m$)가 수관내부($68.5{\mu}m$)보다 두꺼웠다. 과중, 가용성 고형물 함량 및 착색도는 투광률이 높은 수관외부의 과실이 내부보다 높았다. 과실의 가용성 유리당 함량은 수관외부 과실이 내부보다 높았다. 수관내부의 과실은 숙기가 지연되었다. 과피는 수관내부 과실에서 더 두꺼웠고 왁스층의 발달도 많게 나타났다. 따라서 본 연구결과는 수관내부의 광환경을 개선하기 위한 노력과 수관 부위별로 숙기에 따른 분할 수확이 필요함을 제시하였다.

결합조직형성 섬유종 - 2례 보고 - (Desmoplastic Fibroma - 2 Cases Report -)

  • 박용구;류경남;한정수
    • 대한골관절종양학회지
    • /
    • 제6권2호
    • /
    • pp.92-97
    • /
    • 2000
  • 결합조직형성 섬유종은 골에 발생하는 종양중 매우 드문 종양으로, 조직학적으로나 생물학적 성상이 연부조직에 발생하는 복강외 섬유종과 유사하다. 저자들은 22세 남자에 발생한 견갑골 병변과, 34세 남자에 발생한 치골병변을 보고하는 바이다. 방사선학적으로 종양은 골융해성 병변으로, 팽창성 성장을 하였다. 조직학적으로, 다량의 교원질 섬유를 함유하고 있는 방추형 세포로 구성되어 있다. 광범위 절제술을 시행하였으며, 재발은 없었다. 골에 원발성으로 발생하는 결합조직형성 섬유종은 매우 드문 골 종양으로 참고문헌과 함께 보고하는 바이다.

  • PDF

무당개구리 (Bombina orientalis) 진피 상처치유반응의 형태적 분석 (Morphological Analysis of the Dermal Wounds Healing Responses in Bombina orientalis)

  • 정문진;문명진
    • Applied Microscopy
    • /
    • 제28권3호
    • /
    • pp.379-390
    • /
    • 1998
  • Dermal wound healing responses in the skin of the toad, Bombina orientalis, were examined using transmission electron microscopy. At 12 hours after wounding, debridement and collagenolysis occurred in damaged dermis. Histocyte has a large nucleus and long cytoplasm process. Phagocytic vesicle and lysosome were observed in the cytoplasm. Damaged blood cells were transformed spindle to irregular shape. Autolysis was observed in their cytoplasm. Histocytes are found in poly-band. The irregularly shaped nucleus is located peripheral region in cytoplasm. At 2 days after wounding, partial aggregation of blood cells is observed. Phagocytic, activity is observed in histocyte and collagenolytic collagen fibers are scattered. Fibroblast is observed in the dermis at 3 days after wounding. Clusters of ribosomes and some short cisternae of rough-surfaced endoplasmic reticulum are found in the cytoplasm. In histocyte at 7 days post wounding, various size granules composed of moderately dense material are found the cytoplasm. In this period histocyte is round to rod in profile, with slender processes projecting from the surface. At 7 day after injury, it was observed that formation of connective tissue fibers and amorphous ground substance in regenerating skin.

  • PDF