• Horticultural Science & Technology
• /
• v.33 no.2
• /
• pp.155-165
• /
• 2015

Well-feathered (over 10 feathers) 'Fuji'/M.9 apple trees were planted at $3.0{\times}1.0m$ and trained to slender spindle with 2.5 m height or to tall spindle with 3.5 m height, and the vegetative growth, productivity, and fruit quality of two training systems were compared for 8 years. The canopy volume of the tall spindle trees surpassed that of the slender spindle trees 4 years after planting and was 25% larger than that of the slender spindle trees 5 years after planting. The accumulated yield over 8 years for the tall spindle system was 14% higher than that of the slender spindle system. Alternate bearing and incidence of marssonina blotch were observed in both treatments after 5 years of planting. There was often vegetative imbalance in the trees however, the degree of yield loss and vegetative imbalance of the tall spindle trees was lower than those of the slender spindle trees. Soluble solid content and fruit red color of the tall spindle trees were higher than that of the slender spindle trees in 5 year after planting, resulting from increased light penetration in the canopy due to even distribution of lateral branches and from fruit bearing in different height locations of the trees. In conclusion, increasing the tree height to about 3.5 m using slender spindle 'Fuji'/M.9 apple trees planted with over 333 trees per 10a led to better light penetration, yield and fruit quality compared to a conventional wide training system with the slender spindle.

• Horticultural Science & Technology
• /
• v.32 no.4
• /
• pp.454-462
• /
• 2014

This study was carried out to determine the effect of tree height on light transmission, spray penetration, tree growth performance, fruit quality attributes, and labor productivity in the slender-spindle system of 'Hongro'/M.9 apple trees. With increasing tree height, the light penetration into the internal parts of the canopy decreased, especially in the lower canopy. Leaf area index (LAI) increased with increasing tree height, thereby leading to a reduction in the extent of spray penetration into the interior of the canopy. With increasing tree height, shoot growth was more vigorous but produced slender shoots in the upper canopy compared to the lower canopy. Although the soluble solid content and coloration of fruit decreased, there was no difference in fruit firmness and acidity. In addition, the number of final fruit set increased, although the production of large fruit (> 305 g) decreased. The increase in tree height also significantly increased the labor required for practices such as thinning of flowers and fruits, pruning, and harvesting. Nevertheless, this problem of increased in labor input in taller trees would was eased by use of a mechanical lift. Utilizing a lift for thinning the flowers of trees 4.5 m in height saved 14.6 min per tree, compared to the use of ladder. Therefore, it is highly considerable that in order to enhance light transmission and fruit coloration, light conditions should be improved in the internal tree canopy of slender-spindle systems.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.3
• /
• pp.174-183
• /
• 2000

Non-Parallelism the axial direction occurs during grinding process of long slender shafts. The reason for the axial error is due to elastic deformation of the components, accumulation phenomenon of the grinding and wheel wear during the grinding process. The accumulation phenomenon, the size generation mechanism and the wheel wear process during traverse grinding result in complicated process at each step on the wheel surface. The grinding system stiffness obtained from the stiffness of the center on the tailstock and the workpiece varing according to the relative position of the wheel and the workpiece. Further more, the value of wheel wear increases as the grinding process advances. The above mentioned issues make the shape generation process during traverse grinding quite complicated. This research analyzes the shape generation process in the direction of the work spindle. First, the formulation of the grinding system stiffness was conducted and the simulation analysis method of the traverse grinding was established. Also, a measuring system for assessing the dimensinal accuracy of the workpiece has been developed.

• Journal of Bio-Environment Control
• /
• v.18 no.4
• /
• pp.492-501
• /
• 2009

This study was carried out to investigate influence of tree height on vegetable growth, productivity, and labor input in 5 year old slender spindle 'Fuji'/M.9 apple trees planted with the tree space of $3.2{\times}1.2m$ and trained to the tree height of 2.5m in the apple orchard of Apple Research Station, NIHHS, RDA in Gunwi County, Korea. Tree height was extended to the tree height of 4.0m for two years. And then, the tree height was restricted to 2.5 (control), 3.0, 3.5, and 4.0m in 8th year. Yield per 10a was 46, 25, and 4% higher at the tree height of 4.0, 3.5, and 3.0m than at the tree height of 2.5m respectively in first year and 17, 12, and 10% higher respectively, indicating the taller tree, the higher yield. Soluble solid contents was highest in the height of 2.5m than in any other treatments for 2 years, but fruit skin color was not clear. Labor input was increased parallel with the increase of tree height, but yield per labor input was decreased. Gross income and net income per 10a were increased parallel with the increase of tree height in first year, but not increased in second year. In considering production, labor input, and economic efficiency, the optimum tree height of slender spindle 'Fuji'/M.9 apple planted with the tree space of $3.2{\times}1.2m$ was presumed to be 3.0~3.5m.

• Journal of KSNVE
• /
• v.9 no.5
• /
• pp.1029-1035
• /
• 1999

This paper relates to the flexural vibration analysis of slender spindle systems with multiple thin disks, supported by the ball bearings by means of the finite element method. Each system component is analytically modeled taking into account its flexibility and also the centrifugal effect especially for the disk. In order to show the rapid convergence rate and accuracy of the proposed approach, an experimental set-up is built to be versatile. In two distinct cases, its natural modes are numerically computed using only a small number of total element meshes as the shaft rotational speed is varied, and verified through experimental frequency response function obtained by the impact test.

• Korean Journal of Head & Neck Oncology
• /
• v.2 no.1
• /
• pp.67-73
• /
• 1986

An unusual polypoid laryngeal tumor has been studied with light and electron microscopy. In light microscopic section, there were two components: a squamous cell carcinoma and a sarcomatoid spindle cell population. Transitional zone between these two components was found. The electron micrographs demonstrated the presence of slender bundles of tonofilaments in many tumor cells. Desmosomes were present, but few in number and poorly developed. Findings suggest this laryngeal tumor as a spindle cell variant of squamous cell carcinoma.

• Journal of Bio-Environment Control
• /
• v.16 no.3
• /
• pp.258-263
• /
• 2007

This study was carried out to investigate the effects of number of the lower scaffold limbs on tree growth, light penetration, fruit yield, and fruit quality in slender spindle in 6-year-old 'Fuji'/M.9 apple trees. With regard to the growth by the numbers of the lower scaffold limbs, the width of the tree was wide and the growth of new shoots was increased when the number of the lower scaffold limbs was five. Compare with other treatments, five lower scaffold limbs showed high light-interception on the upper (150 cm above the ground) and middle (100 cm above the ground) canopy. There was no difference in the total number of the flower buds of the spurs according to the number of scaffold limbs, but the number and cross section area of flower bud on the lower canopy (120 cm above the ground) were increased where the number of the lower scaffold limbs was five. Fruit yield was highest in the treated with five lower scaffold limbs and fruit weight tended to increase where the number of the lower scaffold limbs was five or eight. With regard to fruit quality, there showed no difference in fruit shape index, firmness, acid content, Hunter L and b value according to the location of canopy and the number of the lower scaffold limbs, but the content of soluble solids was highest treated with five lower scaffold limbs. Hunter a value indicating fruit color was found to be highest treated with five lower scaffold limbs whose light interception was highest.

• Horticultural Science & Technology
• /
• v.32 no.4
• /
• pp.440-447
• /
• 2014

For this analysis, canopies of slender-spindle 'Hongro'/M9 apple trees were divided into 4 positions: upper, lower, exterior, and interior parts. The photosynthetic rate was highest in the external part of the upper canopy of the tree, where it was 4.5 times higher than in the internal part of the lower canopy. This difference was closely associated with differences in light penetration based on canopy position. Analysis of leaf growth characteristics showed that the leaves situated in the internal part of the canopy were larger and thinner than those in the external part of the canopy. The difference in leaf thickness was mainly due to thickness of the primary layer of palisade tissues (68.5 and $110.3{\mu}m$ for internal and external leaves, respectively). Fruit weight and quality were closely related to the extent of light penetration. Fruit weight, soluble solid content, and red skin color were higher in the fruits from the external part of the canopy. Thus, fruit maturity was delayed in the internal part of canopy. The fruit skin and wax layer were thicker in fruits from the internal canopy than in those from the external canopy. Therefore, our results indicate a need for improved light penetration in internal parts of the canopy and for split harvesting depending on maturity at different canopy positions.

• The Journal of the Korean bone and joint tumor society
• /
• v.6 no.2
• /
• pp.92-97
• /
• 2000

Desmoplastic fibroma is a rare primary tumor of bone that histologically and biologically mimics the extra-abdominal desmoid tumor of soft tissue. This report is dealt with two cases of desmoplastic fibroma occurring in a 22-year-old male, scapular lesion and 34-year-old male, pubic lesion. Radiologically, the tumors were lucent and expansile lesions. Histologically, they contained slender spindle cells and various amounts of collagen fibers. Radical excision was done on both cases and no recurrence was reported. Because of its rarity, we report two cases of desmoplastic fibroma.

• Applied Microscopy
• /
• v.28 no.3
• /
• pp.379-390
• /
• 1998

Dermal wound healing responses in the skin of the toad, Bombina orientalis, were examined using transmission electron microscopy. At 12 hours after wounding, debridement and collagenolysis occurred in damaged dermis. Histocyte has a large nucleus and long cytoplasm process. Phagocytic vesicle and lysosome were observed in the cytoplasm. Damaged blood cells were transformed spindle to irregular shape. Autolysis was observed in their cytoplasm. Histocytes are found in poly-band. The irregularly shaped nucleus is located peripheral region in cytoplasm. At 2 days after wounding, partial aggregation of blood cells is observed. Phagocytic, activity is observed in histocyte and collagenolytic collagen fibers are scattered. Fibroblast is observed in the dermis at 3 days after wounding. Clusters of ribosomes and some short cisternae of rough-surfaced endoplasmic reticulum are found in the cytoplasm. In histocyte at 7 days post wounding, various size granules composed of moderately dense material are found the cytoplasm. In this period histocyte is round to rod in profile, with slender processes projecting from the surface. At 7 day after injury, it was observed that formation of connective tissue fibers and amorphous ground substance in regenerating skin.