• 대한기계학회논문집A
• /
• 제26권9호
• /
• pp.1943-1951
• /
• 2002

The casting roll design is one of the most important requirements in twin roll strip casting process. Coupled analyses of heat transfer and deformation for the cast roll are carried out by use of the finite element program MARC to examine the thermal stress and deformation. The effects of several factors on thermal stress and deformation are also investigated. The amount of thermal stress increases when the ni thickness increases and when the casting speed and the copper sleeve thickness decrease.

• The International Journal of Costume Culture
• /
• 제9권1호
• /
• pp.39-51
• /
• 2006

The purpose of this study is to investigate the fit of ready-to-wear garment for girls at the age of puberty and to find out the respective differences by age and locality. For this study, a questionnaire survey was conducted to 547 girls in Seoul and Gyeonggi-do. As a whole. the largest parts of complaints for unfitness were height, waist circumference and, next hip circumference. According to the result of comparing the fit of ready-to-wear garment by items, the fit of clothing for girls at the age of puberty gets relatively worse with the increase of age in all items except one-piece. As for the fit by parts of ready-to-wear garment, significant differences were observed according to age in the length of sleeve, crotch and the length of upper garments. That is, girls at the age of 10${\sim}$11 were found to think that their clothes are long in the three measures.

• 대한가정학회지
• /
• 제37권12호
• /
• pp.141-151
• /
• 1999

This study was carried out to examine the effects of textile materials for thermal insulation value using a thermal manikin. Cotton, polyester, wool, silk and rayon were selected as outer wears like blouses, skirts, slacks, and one-pieces. Acetate was chosen as a lining. Brief and long sleeve upper underwear(cotton) were chosen as the inner wears. The results were as follows; There were no significant differences among the materials in skirts and blouse-skirt suits by the thermal manikin. However blouses, slacks, one-pieces and blouse-slacks suits were showed the effects of materials. Blouse-slacks suits was showed the highest thermal insulation value and one-piece had the lowest thermal insulation value.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1990년도 하계학술대회 논문집
• /
• pp.308-311
• /
• 1990

This paper presents the insulation design of 345kV OF cable normal joint which is essential to construction of underground transmission system. The insulation designs of stress relief cone, pencilling and sleeve were proposed in this paper, and the final insulation design was decided by the results of the electric field and thermal analysis using FEM. It is shown that the designed normal using proves the effect when the developing test is carried out to construct 345kV OF cable if the domestic underground transmission system.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 추계 학술논문 발표대회
• /
• pp.13-14
• /
• 2013

Mechanical splices has been applied in nuclear power plant according to ASME(American Society of Mechanical Engineering) and ACI(American Concrete Institute) Code requirements. In particular sleeve with ferrous filler metal splices and cold roll formed parallel threaded splices have been used in domestic nuclear power plants. The objective of this study is to find out the constructability of the mechanical splices which had been used in Korea nuclear job site and to review the technical trends in the near future.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 B
• /
• pp.800-802
• /
• 2004

When an accident is happen due to using a bad Wire Compressor, some public resentments are caused and It cause lawsuit for we. In case, we will undergo a colossal financial loss. in addition to, Guide to improve quality of operation by using the number of times of pressing and pressing pressure with cooperative private enterprise. And because of needs for Thermal, Electrical and Chemical factor analysis of connection point of sleeve, expect to try improving problems of wire presser whole our company. We expect that reduce fault and save cost by this process. Consequently, we will prevent power losing and black out due to line faults by expulsion of inferiority equipment and prevent heating and line fault. This is possible using Alarming and Auto Locking Wire Compressor that is improve on this study.

• 한국정밀공학회지
• /
• 제17권1호
• /
• pp.198-203
• /
• 2000

In this paper, a numerical analysis is carried out to show the effect of friction farce on the dynamic characteristics of a flow divider valve. The continuity equations and the equation of motion fur spool are numerically solved. The viscous friction force acting on the spool is considered analyzing the Reynolds equation which governs the viscous flow in the clearance gap between the spool and sleeve. Dynamic characteristics are highly affected by the viscous friction farce whose magnitude is relatively small compare with other fluid forces. Therefore present theoretical formulation and numerical scheme can be used generally in designing and performance evaluation of all the hydraulic spool valve.

• 한국의상디자인학회지
• /
• 제21권2호
• /
• pp.15-25
• /
• 2019

This study was carried out to research the size satisfaction and the actual conditions of house caddie uniforms. Survey participants consisted of 310 caddies at 6 membership golf clubs. In order to perform this study 45 questionnaires were used, which consisted of questions pertaining to size satisfaction and sewing, laundry management, and inconvenience and, most importantly performance. Frequency analysis was implemented using SPSS 10.0. The results of this study could be summarized as followed; The highest dissatisfaction factors in the presently worn uniforms were sleeve length and pants hem width. The highest dissatisfaction factors in the sewing satisfaction were pocket and armpit area. Activity is the most important consideration in the choice of a uniform. These results will be applied to develop a comfortable uniform design.

• 대한기계학회논문집A
• /
• 제25권10호
• /
• pp.1541-1550
• /
• 2001

This paper describes experimental investigations in the direct extrusion of copper clad aluminum rods through conical dies. Composite materials consist of two or more different material layers. Copper clad aluminum composite materials are being used fur economic and structural purposes and the development of an efficient production method of copper clad aluminum composite material rods by extrusion is very important, It is necessary to know the conditions in which successful uniform extrusion ,and sound cladding may be carried out without any defects in the direct extrusion. There are several variables that have an influence on determining a sound clad extrusion. In order to investigate the influence of these parameters on the hot direct extrudability of the copper clad aluminum composite material rods, the experimental study have been performed with various extrusion temperatures, extrusion ratios and semi-cone angles of die. Subsequently, the microscopic inspection of interface bonding is carried out for extruded products. By measuring hardness, along extrusion way of products, a variation of hardness has been discussed. Proportional flow state has been considered by measuring radius ratio of Cu sleeve and Al core before and after extrusion.

• 한국생활과학회지
• /
• 제12권2호
• /
• pp.253-263
• /
• 2003

The purposes of this study were to find out an evaluation scale that could predict wear comfort and to investigate the effect of the skin-contacting fiber type on the subjective sensation and microclimate. Sensorial evaluation was basically followed by the Human Perception Analysis (HPA) interviewing 144 consumers. Sixteen female subjects were participated in the sleeve wear test with and without wearing vapor permeable water repellent outerwear. Experimental sleeves were constructed using the same double knit by turning inside out to control other material effects except the skin-contacting fiber type, hence each different side of double knit, cotton side and the cotton/polypropylene blend side, was next to skin in each trial of the experiment. As results, it was noted that the term representing a combined feeling of thermal and wetness sensation, and muggy appeared to be a powerful language to measure perceptual responses of human subject among five dimensions of evaluation. although the ordinary users did not use the term very often. As for the comfort properties of double knits, it seemed that subjects slightly more preferred polypropylene/cotton blend to cotton as the skin-contacting fiber type when they wore outerwear and their skin were covered with sweat, although the result was rot statistically significant and need to be confirmed under higher work load.