• The Research Journal of the Costume Culture
• /
• v.9 no.1
• /
• pp.33-43
• /
• 2001

In this study, both kinds of materials, that is, leather and woolen fabrics, which have similar thickness, have been adopted. To determine proper length of ease, not only sleeve cap height but also sleeve width has been adjusted mainly based on 5cm length of the ease, which follows maximum sleeve cap height, and then different length of ease, for example, 4cm, 3cm, 2cm and 1cm of ease, have been made. As a result, eighteen kinds in total of sleeves have been made: In other words, each nine kinds of both leather and woolen fabrics have different ease lengths. In addition, each sleeve has been inspected visually and functionally. Following conclusion has been gotten based on outcome of the study: 1. Proper ease length for manufacture of leather garment is said to be 1∼2 cm. As a result, ease length with higher sleeve cap height shall be 1∼2cm, while the length with lower sleeve cap height shall be 1cm or less. 2. Wider sleeve width has better function. Considering relations with sleeve cap height, sleeve width shall exceed +4cm of bicep line. 3. to satisfy a variety of those conditions while manufacturing leather garment, sleeve cap height, which is used for the manufacture of full dress and street wear garment, To lessen the ease length, body A.H shall be relatively loose under the arms, or pad shall be supplemented on the shoulder, so that the difference had better be lessened to solve such problems.

• The Korean Journal of Community Living Science
• /
• v.23 no.2
• /
• pp.189-198
• /
• 2012

This study aim was to understand the effects of the change of the sleeve cap height on the sleeve cap line and the sleeve appearance by making nine different sleeve cap height patterns. When a subject sews the virtual and real garments with this, it provides data base through which she can make the suitable sleeve by conducting a comparative analysis of the appearance and cross-sectional diagram and grasping the relation between the sleeve cap line ease and the shape of the sleeve. As a result of the analysis of the image of 3D virtual garment, the shape of the armscye and the position of the bust line and sleeve baseline, the sleeve cap height and the sewing ease of the sleeve cap line affect on the shape of the sleeve and the armscye. Although the real garment is slightly different from the virtual garment they have shown similar tendency. Therefore, if the 3D virtual clothing system is used appropriately, it is possible to expect various study results in the apparel field without making real garments.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.17 no.3
• /
• pp.183-196
• /
• 2015

This study aims to develop sleeve pattern of tailored jacket which shows seamlessly beauty of females in their twenties who have relatively smaller change of body compared people of other ages and has outstanding functional operation. So we selected a pattern of manufacturer who received highest score after evaluating wearing condition of three types of jacket in the industry, whose targets are career women in their twenties and then tested its appearance and functional operation of 6 experimental jackets with armhole depth of B/4 and B/4-1(cm) along with sleeve cap height of A.H/3, A.H/3+1, A.H/3+2. As a result, the pattern which has good result of external appearance evaluation were sleeve with armhole depth of B/4-1 and sleeve cap height of A.H/3+2 as well as sleeve with armhole depth of B/4-1 and sleeve cap height of A.H/3+1. The pattern of good result for movement adaptation were sleeve with armhole depth of B/4-1 and sleeve cap height of A.H/3 as well as sleeve with armhole depth of B/4 and sleeve cap height of A.H/3. So we could find that the larger is the armhole depth and height of sleeve, the better influence on adaptability of jacket it makes and that the smaller is the armhole depth and height of sleeve, the better influence on movement adaptability of jacket it makes. It has been proved that armhole depth of tailored jacket of females in their twenties doesn't affect significantly on its appearance when designing it but it makes good influence on movement adaptability when experimental clothing has armhole depth of B/4-1and that sleeve cap height of A.H/3 that is 1cm shorter than A.H/3+1 which is used in industry makes good influence on appearance and functional operation.

• Journal of the Korean Home Economics Association
• /
• v.24 no.2
• /
• pp.1-11
• /
• 1986

The subject, in the blouses that sleeve caps and sleeve lengthes are different from, did sensory test by right arm movement and both arms movement. This sensory test which is used in fabric good, is Shef's. RESULTS : 1) The ease of bust size is very significant by cap height, at 5%, 1% level by sleeve length. 2) The front area of arm hole is affected by cap height, sleeve length movements more than the back and the under area of arm hole are 3) Sleeve width is affected by cap height, sleeve length both arms movement. That is, they should be designed according to the use because they affect the ease of blouse very much. Especially bust size should be considered with sleeve pattern because the ease bust becomes different with sleeve pattern.

• Journal of the Korean Home Economics Association
• /
• v.24 no.3
• /
• pp.51-58
• /
• 1986

This study is to investigate the Function of sleeve for the construction of cuffs. Three measuremental items of sleeve cap high, length of sleeve and puff quantity of upper sleeve cap are compared between when the experimental man raises righthand static pose. The wearing test is done in sewing cuffs of either fixing up cuffs or not-fixing up cuffs, and in no cuffs. Three measuremental items are pulled length from sleeve end, pulled length from side waist line, and pulled dimensions from waist line. 1. The result according to the length and dimensions variation caused by a change of sleeve cap high. 2. The results according to the length and dimensions variation caused by a sort of sleeve length. 3. The results according to the length and dimension variation caused by the puff quantity of sleeve cap.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.23 no.3
• /
• pp.353-360
• /
• 1999

An investigation made of the variations of angle of bias on the top of the sleeve cap curve line and calculated easing contraction ratio by capheights(A ; a,h$\times$5,/6) B: A, H/4 +4cm C:A.H/3 D: A.H/ 4+3cm E:AH/4+2cm, F: A,H/4+1cm, G: A,H/4, H:A,H/6, I:A,H/8) and the efects of easing contraction on the cap curve lines of sleeve A, D, G by easing stitch density with the gathering foot: sewing condition-lockstitch industrial machine stitch density(N1.0 ; 38stitches/3cm N1.5: 26stitches/3cm, N2.0 ; 19stitches/3cm, N2.5 ; 14stitches/ 3cm) The results obtained were as follows; 1) The variations of the angle of bias on the top of the sleeve cap curve line by cap heights can be done according to the angle balance (front; $\alpha$-$\beta$ back ; $\alpha$'- $\beta$') between the angle (front ;$\alpha$, $\beta$, back ; $\alpha$'- $\beta$') of bias of the two base-lines. 2) The higher cap height the more higher the calculated easing contraction ratio. 3) The lower the stitch density the higher easing contraction ratio. 4) The effects of easing contraction was that sleeve G was more than sleeve A, D.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.19 no.4
• /
• pp.123-137
• /
• 2017

The purpose of this study is to suggest sleeve cap height with a satisfying wearing sensation and appearance on jackets for women in their twenties so that high-consumer demand jackets can be produced. Five experimental jackets with sleeve cap heights of [(AH/3)-1cm], [(AH/3)-0.5cm], [AH/3], [(AH/3)+0.5cm] and [(AH/3)+0.8cm] were made for 30 subjects to try on after which the subjects were then surveyed for their assessment of appearance, wearing sensation and preference. On the basis of the results, the optimum height of the sleeve cap has been proposed along with the following contents and results of this research. 1. [AH/3] [(AH/3)+0.8cm] of sleeve cap height was assessed to beof desirable appearance. 2. [AH/3] of sleeve cap height garnered a high opinion in terms of intuitive wearing sensation, while [(AH/3)-1cm] [AH/3] were the heights with overall satisfaction of intuitive and movement wearing sensations. If discomfort in the upper sleeve at 'straight arm' posture can be tolerated, the sleeve cap height can be set to [(AH/3)-1cm]~[(AH/3)+0.5cm]. 3. [AH/3] and [(AH/3)+0.5cm] were found to have a high preference among wearers, which indicated that the women in their twenties prefer a slim type of sleeve, putting appearance above wearing sensation. Consequently, [AH/3] is desirable when appearance, wearing sensation and preference are considered, [(AH/3)+0.5cm] is fit for business uniform for static duties or formal dress focused on aesthetic impression and [(AH/3)-1cm]~[AH/3] are desirable for work clothes when considering active duties.

• Journal of Fashion Business
• /
• v.17 no.1
• /
• pp.170-185
• /
• 2013

The suitability of the pattern manufactured with the development figure was considered by reviewing the development conditions that can be directly connected to the basic pattern in the human body surface development figure with the cast bandage method. The method to prepare the sleeve basic pattern was based on the cylindrical surface development method, and the sleeve basic pattern covering the 45 and 90 degrees momentum of the arm-movement was made by using the cast-type body surface development figure prepared with the horizontal line of the sleeve hem placed horizontally in the plan and by combining the cast-type body surface development figure in the standing position with the figure in the moving position. The test clothing was prepared with the sleeve pattern adding the bodice pattern in the standing position and the momentum and was worn on the FRP replica. The relationship theory of the body surface development figure with the pattern was derived by reviewing the suitability from the wearing state. The sleeve-cap height of the sleeve basic pattern resulted in about 80% in the standing position when the needs for a physical activity are 45 degrees and the about 50% when the needs for a physical activity are 90 degrees. The additional size of the diagonal length of the sleeve-cap could be set as "0" if the sleeve-cap height is low by 50% and as 50% of the additional size in the standing position if the sleeve-cap height is 80%.

• Journal of the Korean Society of Costume
• /
• v.42
• /
• pp.223-230
• /
• 1999

Dressmaking which is defined as the process of changing two-dimensional cloth into three-dime-nsional clothes needs a lot of joining parts. Particularly sleeve needs a more curved surface than other joining parts owing to shape of the top of arms. Easing is used to control the fullness along the seam-line to create the fullness curved shape of the sleeves and it plays an important role in increasing three-dimensional constru-ction power. unfortunately sufficient data regarding effective easing conditions to increase three-dimensional construction power of sleeve are not available. Therefore the author tried to investigate the effective easing conditions to increase three-dimensional construction power of sleeve by cap height. Easing construction power of sleeve by cap height. Easing contraction made by different angles on the sleeve cap curve line previous work were examined and the effective easing conditions according to the variation of angles were determined. This study contains the following objectives. Firstly to obtain the easing contraction ratio in sleeve according to the above easing conditions. Secondly to investigate the three-dimensional construction power or sleeve by the factors of easing contraction. Thirdly to determine for each sleeve the effective easing conditions on the basis of the calcuative easing contraction ratio in the sleeve patterns by cap heights.

• The Research Journal of the Costume Culture
• /
• v.14 no.3 s.62
• /
• pp.404-417
• /
• 2006

The purpose of this thesis, therefore, is to examine the shaping methods and the knitting drafts of sleeve cap in the knitwears which are currently used by the manufacturers; to study the curve forms of sleeves in knitwears by analyzing synthetically the results of investigating the problems of knit wear sleeves; to present the most suitable sleeve cap for the knitwears. As the studying methods, I collected the basic data from the working-level persons of knit wear manufacturers, examined the knitting draft in the knitwears, and from that, made three kinds of comparative experimental garments and one kind of research experimental one as 10G and 16G. In doing so, I showed the sleeve cap suitable for the knitwears with plain stitch after operating sensual evaluation with Liker's 5-point rating measure. The analysis of data was handled with statistics by using SPSS Ver. 12.0; the method of statistics was executed by Frequency Analysis, Trust Analysis, one-way ANOVA, and Duncan test according to each topic of the research. As the result of the sensual evaluation of the experimental garments produced from the study, the research experimental garment looks better than the comparative experimental one in both 10G and l6G; has less extra folds around the front part of sleeve cap; looks more natural in sleeve caps of the body part and of a sleeve. From this, I am able to figure out that the research experimental garment looks better than the comparative experimental one produced by knit wear manufacturers. In addition, I can come to know that the different knitting of the front line and the back one of armhole in the knitwears has a favorable impact on improving the appearance of a sleeve.