• 대한건축학회논문집:구조계
• /
• 제35권2호
• /
• pp.21-28
• /
• 2019

Handmade hydrated lime has been used for preservation and repair of architectural heritage in Korea. However, the effect of the amount of water used for slaking quicklime on the physical and chemical properties of the hydrated lime, which is the result of the slaking process, has not been clearly understood. In this study, particle size distribution, chemical composition and crystalline phases of the hydrated lime are investigated by varying the amount of water used for the slaking. In addition, temperature history during the slaking process is examined. For this, various experiments, such as laser diffraction analysis, X-ray fluorescence, X-ray diffraction, thermogravimetric analysis, and temperature recording using a thermocouple, were performed. When the quicklime came into contact with water, its temperature reached $100^{\circ}C$ within 10 min due to sudden exothermic reaction of calcium oxide, and this temperature was maintained for about 30 min. The water to lime ratio influenced the cooling rate during the slaking process; that is, the more water was used, the longer it took to reach an ambient temperature. The amount of water for the slaking did not have a noticeable effect on the contents of major components of the hydrated lime such as calcium hydroxide and calcium carbonate, but when slaked with more amount of water, average particle size of the lime tended to decrease. The experimental results in this study can be used as references for developing guidelines on the safety or appropriate amount of water in the lime slaking process.

• 한국안전학회지
• /
• 제18권1호
• /
• pp.89-93
• /
• 2003

The failure of rock slopes were influenced by weathering, which causes change in the shear strength. The weathering is also directly related to slaking and swelling characteristics. In the paper, the core of diameter loom was obtained by digging on rock slope of Kong-ju in Korea and then EDX(Energy Dispersive X-ray spectrometer) analysis was carried out to verified element of chief rock-forming minerals. Uniaxial compression tests, slaking tests, and point load test are performed to study engineering characteristics of conglomerate and red shale. As a results of slaking test, slaking index of conglomerate indicate range of 85.11-99.58 and shale indicate 58.37-99.23. Therefore, it is recognized that the resistance of shale to weathering decreases in shallow depth and it greatly influences the strength of rock. The result of uniaxial compression test and Point load test show that the strength of sedimentary such as conglomerate and red shale has an influence on both weathering and saturation.

• 한국지반공학회지:지반
• /
• 제12권2호
• /
• pp.33-42
• /
• 1996

포항지역 이암의 풍화가 slaking및 흡수팽창에 기인됨을 인식하고, 3개 지점에서 채취한 이암시료를 대상으로 광물성분, slaking 및 팽창시험을 수행하였다. 또한 풍화로 인하여 열화된 이암의 잔류전단강도를 측정하였는데 역전식 잔류전단시험을 채택하였다. 시험결과, 각 이암시료의 광물성분은 석영과 점토광물이 대종을 이루고 있으며, 두번째 slaking cycle에서의 slake내구성 지수는 71%~96% 범위이고 암석분말시료의 액성한계가 높을수록 내구성지수는 떨어지는 경향을 보인다. 또한 팽창압력의 크기도 액성한계가 높은 시료에서 월등히 큰 9.4kg10m2로 측정되었으며, 이러한 경향은 팽창변형률(최대치 :33.5%)에서도 마찬가지로 나타났다. 이암의 잔류전 단강도는 건습반복회수가 증가될수록 감소되어 5회 건습반복후의 잔류강도는 c,=0.24kg/cm2, f,=28$^{\circ}$로 측정되었다. 그리고 습윤상태에서 이암-이암 경계면을 따라 측정한 잔류강도가 최저값인 cr=0 and or=21.5$^{\circ}$로 나타났다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1993년도 사면안정
• /
• pp.153-166
• /
• 1993

• Geomechanics and Engineering
• /
• 제3권3호
• /
• pp.219-231
• /
• 2011

Waste fills resulting from coal mining should consist of large, free-draining sedimentary rocks fragments. The successful performance of these fills is related to the strength and durability of the individual rock fragments. When fills are made of shale fragments, some fragments will be durable and some will degrade into soil particles resulting from slaking and inter-particle point loads. The degraded material fills the voids between the intact fragments, and results in settlement. A laboratory program with point load and slake durability tests as well as thin section examination of sixty-eight shale samples from the Appalachian region of the United States revealed that pore micro-geometry has a major influence on degradation. Under saturated and unsaturated conditions, the shales absorb water, and the air in their pores is compressed, breaking the shales. This breakage was more pronounced in shales with smooth pore boundaries and having a diameter equal to or smaller than 0.060 mm. If the pore walls were rough, the air-pressure breaking mechanism was not effective. However, pore roughness (measured by the fractal dimension) had a detrimental effect on point load resistance. This study indicated that the optimum shales to resist both slaking as well as point loads are those that have pores with a fractal dimension equal to 1.425 and a diameter equal to or smaller than 0.06 mm.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 지반공학 공동 학술발표회
• /
• pp.239-246
• /
• 2005

slaking 은 굴착에 의해 노출된 암반에서 발생하는 강도저하 및 입자간의 결합력 약화에 의해 암반이 세립화하는 현상이다. 이러한 slaking은 특히 퇴적암으로 구성된 암반사변의 안정성에 영향을 미치는 중요한 인자로 작용한다. slaking에 의한 암반사면의 불안정성은 신생대의 이질암이나 미고결 응회암에서와 같이 암반 자체의 강도 저하 및 결합력 약화에 의해 발생하는 붕괴현상과 차별풍화에 의해 이암 등이 급속도로 쇄굴 및 풍화되어 상부에 놓여 있는 암석이 낙석 등의 형태로 붕괴되는 현상으로 구분할 수 있다. 본 연구에서는 이암의 차별풍화에 의해 사면의 불안정성이 유발되는 연구지역을 대상으로 풍화 및 쇄굴 속도와 slake의 상관관계를 밝히고자하였다. 이를 위하여 slake test와 slake durability test를 수행하였으며 slake durability index를 획득하였다. 실험을 통해 획득된 slake durability index를 연간 쇄굴속도와 비교하여 상관관계를 검토하였으며 기존의 연구결과와 비교하여 slake durability index를 활용하여 쇄굴 정도를 예측할 수 있는 가능성을 제시하였다.

• 한국환경복원기술학회지
• /
• 제5권3호
• /
• pp.1-8
• /
• 2002

Clayey paddy soils should be mixed with other good coarse soils to be used as a material for the lining, or, embankment. However, it has been difficult to separate soil particles from each other because of the internal cohesion in the soil gradation(separation) characteristics of the fine soil were investigated by various laboratory tests including the slaking durability test. Degradation rate of the soil were dependent upon the clay content and the initial water content before the submergence. The amount of degradations decreased as initial water content increased with exponential functions. The dried specimens separated into the particles after 24 hours of the submergence and specimens which water contents were less than 10% also separated into the particles after 2, or 3 days of the submergence. Compaction curves and the unconfined strength were not varied before and after the submergence. However, unconfined strength decreased as water content increased.

• 한국세라믹학회지
• /
• 제36권8호
• /
• pp.876-885
• /
• 1999

In order to develop high performance basic dam block for tundish vessel in steel-making binders and additives on hydration and thermal characteristics of magnesiz castable refractories were studied. Crack initiation and propagation in cement bonded magnesia castables due to slaking of magnesia clinker at drying process were suppressed by using spinel clinker instead of magnesia powder. In case of Na2O$.$2CaO$.$P2O5(NC2P) bonded castable crack initiation due to slaking of magnesia clinker did not occur but bending strength at high temperature was low. Mechanical properties of NC2P bonded castable refractories at high temperature were improved by using magnesia clinker that contains low SiO2 contents.

• 한국산학기술학회논문지
• /
• 제19권4호
• /
• pp.123-131
• /
• 2018

본 연구는 ${\bigcirc}{\bigcirc}$ 고속국도 공사 중 발생된 이암 절토 사면의 붕괴 요인 분석 및 대책방안을 제시하였다. 기반암인 이암에 대해 실내시험을 수행하고, 국제 기준에 의거해 공학적인 특성을 규명하였다. 그리고 설계 시 수행되었던 사면안정해석을 재검토 하였다. 또한, Swelling-Slaking 현상으로 인해 기반암인 이암의 강도열화특성을 고려한 안정해석을 추가적으로 수행하였다. 기반암인 이암에 대해 Swelling-Slaking Test 결과, 풍화내구성은 낮음-보통으로 나타났으며, 팽창변형률은 매우 낮음으로 나타났다. 설계 안정해석 검토 결과, 이암의 공학적 특성을 고려하지 않고, 한계평형해석을 이용해 실제와 상이한 결과가 나타났다. 강도열화특성을 고려한 추가안정해석 결과, 사면의 붕괴지점과 안정해석의 최대전단변형률 발생지점이 동일하게 나타났으며, 건기시 우기시 모두 기준 안전율을 만족하지 못하였다. 붕괴 사면의 대책방안으로는 사면경사완화공법이 가장 적절하였다. 유한요소해석을 통해 완화 경사를 산정하였다. 완화 경사의 현장 적용성을 위해 시추공영상촬영과 비교한 결과, 미고결된 이암의 대부분이 제거되는 것으로 나타나 미고결된 이암으로 인한 추가적인 붕괴 위험성은 현격히 저하되는 것으로 나타났다.

• 시멘트 심포지엄
• /
• 23호
• /
• pp.239-244
• /
• 1995