• 한국구조물진단유지관리공학회 논문집
• /
• 제13권2호통권54호
• /
• pp.199-205
• /
• 2009

하프PC 슬래브는 시공중에 슬래브 판에 균열이 발생하기 쉽고 이러한 균열들을 보수보강 하지 않은 상태에서 덧침콘크리트를 타설할 경우 합성슬래브의 내력에 영향을 미칠 것으로 사료된다. 하지만 하프PC 슬래브에 발생한 균열이 합성슬래브의 구조성능에 미치는 영향에 관한 연구는 아직까지 없는 실정이다. 따라서 본 연구에서는 하프PC 슬래브에 발생한 균열이 합성 슬래브의 내력에 미치는 영향을 조사하기 위하여 덧침 콘크리트를 타설하기 전에 하프PC 슬래브에 균열을 발생시킨 시험체와 균열이 없는 합성슬래브 시험체를 제작하여 슬래브의 휨 성능을 검토하였다.

• Structural Engineering and Mechanics
• /
• 제89권6호
• /
• pp.627-634
• /
• 2024

This research deals with the process of conducting a reinforced concrete slab loading test of a Residential Complex Project at the Shatt Al Arab District which is located in southern Iraq. The purpose of the test which represents a destructive test is to evaluate the structural behavior of the slab condition state during and after the examination of the test process in order to ascertain the ability of the slab ceiling to withstand the loads generated during the use of the building. The test was carried out accordant to ACI 437.2-13 code. The reason for this test is the postponed 8 years of building project construction. Concrete blocks were used to simulate and conduct a loading test of 30-tons for 3 days. The central point has been installed to measure the slab deflection that occurred during the test. The results showed that both the total deflection and residual deflections were lesser than the permissible values according to the ACI 437.2-13, the RC slab behavior was mainly linear structural behave, and that the purpose of the examination was achieved. Finally, a new method was introduced to the assessment of the slab condition at the support which is found in good condition.

• 콘크리트학회논문집
• /
• 제25권5호
• /
• pp.517-528
• /
• 2013

모듈러 기술은 자동차, 플랜트, 조선산업 분야에서 이미 오래전부터 적용해 오던 기술로, 최근 교량 분야에도 적용되고 있다. 모듈러교량은 부재별 세부설계 과정이 생략되고, 모듈별로 표준화 된다는 점에서 기존의 조립식교량과는 차별화 된다. 거더형식 프리캐스트 모듈러교량은 단순지지 교량 형식으로 개발되었으며, 다경간 교량에 적용할 경우 단순지지 교량 형식의 모듈러교량을 연속화하는 방법으로 적용할 수 있다. 거더형식 프리캐스트 모듈러교량의 연속화는 시공이 간편하고 급속시공에 적합한 연결슬래브를 적용하는 방법으로 이루어진다. 연결슬래브는 1950년부터 미국에서 RC 형식으로 사용되기 시작하였으며, 2000년대에는 ECC를 적용한 연결슬래브(ECC 연결슬래브)가 개발된 바 있다. 이 연구에서는 ECC에 비해 재연성이 좋고 경제적인 RC를 적용한 연결슬래브를 다경간 거더형식 프리캐스트 모듈러교량에 적용하였으며, 기존의 RC 형식 연결슬래브를 보완한 형태의 연결슬래브와 수정된 연결슬래브의 설계방법을 제안하였다. 제안된 연결슬래브 설계방법의 검증을 위하여 연결슬래브 바닥판 실험체를 제작하고 연결슬래브의 휨성능 및 균열 사용성 검증실험을 수행하였으며, 이후 실제 교량시스템을 모사한 실험체를 이용하여 200만회 피로성능 검증실험을 수행하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 학회창립 10주년 기념 1999년도 가을 학술발표회 논문집
• /
• pp.429-432
• /
• 1999

The concrete slab on the foundation may have curling and warping deformations due to moisture and temperature gradient of its section. These deformations may change the support conditions of concrete slabs, and cause higher level of stresses than expected. This study was performed to verify the effect of partial support condition of concrete slab on the foundation due to its deformations and to develop the useful analytic method for describing these phenomenons. The partial support condition verified by FWD test results, and it was concluded that the gap model could be useful in analysing the concrete slab with partial support conditions.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.639-642
• /
• 2003

In this paper, fatigue behavior of concrete slab tracks under railway loads by experimental method is discussed. The addition of steel fibers to concrete mix has been receiving more attention as a way of improving the crack behavior of concrete beams an slabs tacks. This study two objectives: 1) to observe the fatigue behavior of fiber reinforced concrete slab in labor, and 2) to present crack propagation and deflection of fiber reinforced concrete slab track under railway loads in the Waghauser test line. Nine beams, two slabs and one test track were experimentally tested.

• 복합신소재구조학회 논문집
• /
• 제1권1호
• /
• pp.9-15
• /
• 2010

In this paper, A reinforced concrete slab bridges is analyzed by the composite laminates theory. Both the geometry and the material of the cross section of the reinforced concrete slab bridge are considered symmetrical with respect to the mid-surface so that the bending extension coupling stiffness, Bij = 0, and D16 = D26 = 0. Each longitudinal and transverse steel layer is regarded as a lamina, and material constants of each lamina is calculated by the use of rule of mixture. This slab with simple support is under uniformly distributed vertical and axial loads. In this paper, the finite difference method and specially orthotropic laminates theory are used for analysis. The result of specially orthotropic laminates theory analysis is modified to obtain the solution of the beam analysis. The result of this paper can be used for reinforced concrete slab analysis by the engineers with undergraduate study in near future.

• 한국전산구조공학회논문집
• /
• 제27권1호
• /
• pp.27-35
• /
• 2014

본 연구에서는 2경간 합성바닥슬래브의 기여도를 반영하여 철골모멘트골조의 연쇄붕괴저항성능의 더욱 정확한 평가를 위해 사용할 수 있는 개선된 에너지기반 비선형정적 해석법을 제시하고자 한다. 이를 위해, 우선 재료적/기하학적 비선형 유한요소해석을 수행하여 2경간 합성바닥슬래브의 거동을 살펴보았다. 2경간 합성바닥슬래브의 변형형상을 이상화하여 에너지기반 해석을 위한 근사모델을 개발하였다. 제안모델은 기둥제거 시나리오하에서 2경간 합성바닥슬래브의 일방향 축인장력 및 변형에너지응답을 모델링하는데 쉽게 이용할 수 있음을 보여주고 있다.

• 국제초고층학회논문집
• /
• 제4권4호
• /
• pp.283-290
• /
• 2015

Crack control remains a primary concern for mass concrete structures, where the majority of cracking is caused by temperature changes during the hydration process. One-time pouring is a useful construction method for mass concrete structures. The suitability of this method for constructingon of the Shanghai Tower's mass concrete foundation slab of Shanghai Tower is considered here by a numerical simulation method based on a 6- meter- thick slab. Some of the conclusions, which can be verified by monitoring results conducted during construction, are as follows. The temperature gradient is greater in the vertical direction than in the radial direction, therefore, the vertical temperature gradient should be carefully considered for the purpose of crack control. Moreover, owing to cooling conditions at the surfaces and the cement mortar content of the slab, the temperatures and temperature gradients with respect to time vary according to the position within the slab.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회논문집(I)
• /
• pp.541-546
• /
• 2000

Recently, there have been increased mush concerns about repair and rehabilitation works for aged concrete structures to keep up with rapid economic growth in Korea since the early 1970's. In particular, it is believed in these days that there are significantly increasing number of aged concrete bridge slabs, which are strongly needed to construct and rehabilitate by innovative construction method. The objective of this research is to develop the new construction method of concrete slab in bridge structure, which can contribute to minimize the traffic congestion during the repair and rehabilitation works of aged concrete slab, and can also sufficiently assure the quality through the minimization of in-situ works at the site. I-beams with punch holes, which are substituted instead of main reinforcing steels in concrete slabs, will be manufactured in accordance with the specification in the factory, and will be preassembled into the panel. After erecting the preassembled panels in the site, concrete will be poured into the slab panel. This test is to investigate physical properties of I-Beam with punch holes itself, and then to investigate structural properties of assembled I-Beam panels through static and fatigue test, of which can be utilized for the development of new construction method of concrete slab in bridge structure.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 봄 학술발표회 논문집
• /
• pp.458-463
• /
• 2000

Recently, there are increasing much concerns about repair and rehabilitation works for aged Concrete Structures which had been constructed on around the 1970's for rapid economic growth in Korea. In particular, it is believed that there are many aged concrete slabs for Highway bridges in these days. Thus new construction method of concrete slabs are strongly needed to minimize the traffic congestion during the repair works. The objective of this research is to develop the new constructional method of concrete slab in bridge structure, which can contribute to minimize the traffic congestion to be occurred during the repair and rehabilitation works of aged concrete slab, and can also assure the reliable quality through the minimization of in-situ works at the site. I-beams with punch holes will be manufactured in accordance with the specification in the factory, and will be preassembled into the panel. After erecting the preassembled panels in the site, concrete will be poured into the slab panel. This research is to investigate physical properties of I-Beam with punch holes itself, and then to investigate structural properties of assembled I-Beam panels through static and fatigue test, of which result can be utilized for the development of the new constructional method for concrete slab in bridge structure.