• 한국해양환경ㆍ에너지학회지
• /
• 제3권2호
• /
• pp.11-17
• /
• 2000

해양에서 해수보다 비중이 낮은 유류의 이동.확산은 해면 (0m) 유동에 따라 좌우된다. 해양에서의 유류확산에 대한 현실에 부합되는 모델 개발의 일환으로 한반도 연안역 4개 해역에서 해양 표면 취송류 (skin drift) 추정에 대한 연구를 수행하였다. 본 연구에서는 해면과 수면하 1.5m의 유동을 동시 관측하여 둘간의 차이로서 바람에 의한 해양표면 취송류를 추정하였다. 표면취송류 유속의 평균 크기는 바람의 2.9% 였으며, 풍향에 대한 표면취송류 편향의 평균치는 바람의 오른쪽 18.6° 였다. 관측 결과는 표면취송류의 모델링에 활용하였다. 모델링에서는 바람에 따른 표면 취송류의 공간적 변동을 재현하였으며, 관측된 결과와 비교하여 검증하였다.

• 수산해양기술연구
• /
• 제43권4호
• /
• pp.291-300
• /
• 2007

The crayfish-shaped artificial bait for octopus drift line is manufactured, into which is made to insert ordinary bait. The effects of the artificial bait are confirmed through the analysis of octopus' behavior in the laboratory in comparison with the existing bait of pig-fat skin, and the investigation of the octopus catch on the sea, and in addition, the examination of the water quality in relation to the bait to be inserted into the artificial bait is done together. The artificial bait is red in color, 10.5cm in the length of the body, and 29g in weight. The octopus behavior in relation to the bait in the laboratory has shown a good result in which more than 30% of the octopuses rushed to the artificial bait. In the analysis of the octopus sitting time by the bait, the octopus stayed longer with the artificial bait(63.7%) than the pig-fat skin(25.1%). The octopus sitting time at the artificial bait inserted with frozen squid(48.8％, 44.6％) is shown to be longer than that of the pig-fat skin(36.9％) or boiled fish paste(21.2％). In the analysis of sitting frequency to the bait, the case of the artificial bait(total 17 times) was more than that of the pig-fat skin(total 3 times), and the case of the artificial bait with frozen squid attracted the octopuses more frequently than that of the pig-fat skin or the boiled fish paste. In the field experiment, the fishing boat A(Manseon-ho, 1.22tons) caught the total 93 octopuses, while the fishing boat B(Ilho-ho, 0.73tons) caught the total 154 octopuses, all of which weighed less than 9.0kg. In the comparison with the total catch, the case with the artificial bait was a little higher than that of the pig-fat skin($^{**}p\;<\;0.05$). In the analysis of the water quality in relation to the baits, the COD showed the descending order of frozen squid(0.57mg/g), boiled fish paste(0.18mg/g), and pig-fat skin(0.10mg/g), and the case with frozen squid was the highest and the case of the pig-fat skin, lowest. The total phosphorus, like the COD, showed the highest in frozen squid(0.02mg/g), and in case of the total nitrogen, unlike the COD, the pig-fat skin was shown to be the highest(0.006mg/g).

• 수산해양기술연구
• /
• 제42권2호
• /
• pp.78-85
• /
• 2006

A survey on the fishing gear for octopus drift-line fishing was done in Gangwon-do, Sacheon, Gyeongnam and Hokkaido, Japan, while a survey on the environments of fishing grounds used data from January to August from the Korea east coast farming forecast system of Donghae Fisheries Research and Development Institute. The present situation of fishing was examined with boats engaging in drift-line fishing from March to August in the coastal waters along Gangneung. The fishing tackle for octopus drift-line fishing was made manually, and the size, shape, and weight of the hook and number of shooting used vary according to the fishing time and region. Lead is used as the material for sinkers. As bait, pork fat with skin is mostly used in Gangwon-do. The temperature of the bottom water layer in the coastal fishing ground of Gangneung from April to June ranges from $3.2-12.4^{\circ}C$, which is the optimal temperature for octopuses. During July and August, the temperature ranges from $5.0-20.6^{\circ}C$. The maximum difference between day and night temperatures reached up to $9.2^{\circ}C$. Salinity is generally stable at $33.2-35.324.6%_{\circ}$, which does not affect the inhabitation of octopuses. The octopus catch reached its peak from May to July, while most octopuses weighed less than 1 kg (76.7%). The results show that it is effective to carry out octopus drift-line fishing up to a depth of 40 meters; and that the maximum number of octopuses per line is obtained with an operation time of six hours.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
• /
• pp.588-590
• /
• 2006

Recently, many on-line approaches to instrument channel surveillance (drift monitoring and fault detection) have been reported worldwide. On-line monitoring (OLM) method evaluates instrument channel performance by assessing its consistency with other plant indications through parametric or non-parametric models. The heart of an OLM system is the model giving an estimate of the true process parameter value against individual measurements. This model gives process parameter estimate calculated as a function of other plant measurements which can be used to identify small sensor drifts that would require the sensor to be manually calibrated or replaced. This paper describes an improvement of auto-associative kernel regression by introducing a correlation coefficient weighting on kernel distances. The prediction performance of the developed method is compared with conventional auto-associative kernel regression.

• 국제초고층학회논문집
• /
• 제7권1호
• /
• pp.17-32
• /
• 2018

This paper explores the function of a structural skin with an embossed surface applicable to use for tall building structures. The major diagrid system with a secondary embossed surface structure provides an enhanced perimeter structural system by increasing tube section areas and reduces aerodynamic loads by disorienting major organized structure of winds. A parametric study used to investigate an optimized configuration of the embossed structure revealed that the embossed structure has a structural advantage in stiffening the structure, reducing lateral drift to 90% compared to a non-embossed diagrid baseline model, and results of wind load analysis using computational fluid dynamics, demonstrated the proposed embossed system can reduce. The resulting undulating embossed skin geometry presents both opportunities for incorporating versatile interior environments as well as unique challenges for daylighting and thermal control of the envelope. Solar and thermal control requires multiple daylighting solutions to address each local façade surface condition in order to reduce energy loads and meet occupant comfort standards. These findings illustrate that although more complex in geometry, architects and engineers can produce tall buildings that have less impact on our environment by utilizing structural forms that reduce structural steel needed for stiffening, thus reducing embodied $CO^2$, while positively affecting indoor quality and energy performance, all possible while creating a unique urban iconography derived from the performance of building skin.

• Ocean and Polar Research
• /
• 제35권3호
• /
• pp.193-203
• /
• 2013

A GPS-drifter was newly designed to observe the sea surface skin current and to estimate the direct wind effect on the sea surface. After conducting a test to establish and verify the accuracy of the GPS itself in the laboratory, in-situ experimental campaigns at Saemangeum in Gunsan city and Haeundae in Busan city, Korea, were carried out to ascertain the drifter track and to estimate the velocity data set on Oct. 3, 15, 23, 27 and Nov. 25, 2011. The current meters, RCM9 and ADCP, were moored together to remove the background current field, and the wind data were obtained from several marine stations such as towers and buoys in these areas. The drifter-observed velocity show good agreement with the flow obtained by the HF radar in the Saemangeum area. The direction of the wind-driven current extracted from the drifter-observed velocity was completely deflected to the right, however the degree of the angle was different according to the drift types. The average speed of the wind-driven current matched with 2.19~2.81% of the wind speed and the deflection angle was about $8.0{\sim}10.9^{\circ}$ without adjustment for the land-sea effect, and about 2.19~2.84% and $4.1{\sim}6.0^{\circ}$ with the adjustment for the land-sea effect.

• 한국강구조학회 논문집
• /
• 제20권2호
• /
• pp.289-301
• /
• 2008

이중강판합성벽은 타이바로 연결된 강판외피 사이에 콘크리트를 충전시킨 구조벽으로서, 벽체의 구조성능을 향상시키고, 벽체의 두께를 줄이며, 별도의 거푸집 및 배근 공사없이 시공성을 향상시키기 위하여 개발되었다. 본 연구에서는 주기하중을 받는 이중강판합성벽의 비탄성거동특성 및 내진성능을 평가하기 위하여, 직사각형 및 T형 단면형상을 갖는 단일벽 및 병렬벽 실험체에 대하여 실험 연구를 수행하였다. 실험 결과, 이중강판합성벽은 주기하중에 대하여 핀칭이 없이 우수한 에너지소산능력을 나타냈다. 벽체하단부 기초의 접합상세와 단면형상에 따라 파괴모드 및 변형능력의 차이를 보였으며, 주로 벽체기초 또는 연결보 용접부의 파단과 강판국부좌굴에 의하여 파괴되었다. 적절한 용접 및 보강 상세를 갖는 실험체들은 2.0~3.7% 층간변형각의 변형능력을 보였다. 또한 벽체와 연결보의 비탄성강도를 고려하여 단일벽 및 병렬벽 실험체의 하중재하능력을 평가하였으며, 이를 실험결과와 비교하였다.

• 센서학회지
• /
• 제27권5호
• /
• pp.340-344
• /
• 2018

Electrodes are an important part of electrocardiography (ECG); disposable electrodes have been extensively used. However, personal ECG monitoring devices for Internet of Things applications require reusable electrodes. As there have been no systematic studies on the characteristics of reusable electrodes to date, we conducted this study to assess the performance and feasibility of electrodes with different materials. We built reusable electrodes using twelve different metallic materials, including commonly used copper, silver, zinc, plating materials, chemically inert titanium, stainless steel, and aluminum. Each electrode was fabricated to a size of $5{\times}10mm$. Their characteristics such as offset, baseline drift, stabilization time, and chemical inertness were compared. A personal ECG monitoring system was used to test the manufactured electrodes. The performances of the Ag, Cu, and Zn electrodes were better than the performances of other electrodes. However, these materials may not be used owing to the chemical changes that occur when the electrodes are in contact with the skin, such as discoloration and corrosion, which deteriorate their electrical characteristics. Titanium, stainless steel, and aluminum are chemically stable. The titanium electrode showed the best performance among the three, and it is our recommendation as a material for manufacturing reusable electrodes.

• Archives of Plastic Surgery
• /
• 제37권4호
• /
• pp.504-508
• /
• 2010

Purpose: Traumatic telecanthus can result from nasoethmoid-orbital fractures. Repair of the medial canthal tendon (MCT) using transnasal wiring is regarded as a choice of method to treat telecanthus, however, is often complicated by incomplete anchoring and drift of canthus, extrusion of wire, in-fracture of orbital bone, and eye damage. The authors introduced oblique transnasal wiring method through the Hiraga's epicanthopalsty incision instead of well-known classical bicoronal approach. Methods: Five patients with traumatic telecanthus were treated with this method. Though the Hiraga's epicanthoplasty incision, we could approach the operative field; the medial orbital wall and detached MCT. Oblique transnasal wiring was performed as following steps. After slit skin incision on the contralateral nasal recession area, drill holes were made from this point to the superior and posterior point of lacrimal sac of deformed eye. A 2-0 wire was double-passed through the holes and MCT. Traction was applied to ensure pulling the MCT and the wires were twisted in the contralateral nose, securing the MCT in the correct position. Results: All patients except 1 person showed improvement and rapid recovery. On average each canthus was moved 5.6 mm medially. In all cases, there were no eyelashes disappear, lacrimal canaliculitis, lacrimal duct injury, or infections. Conclusion: The Hiraga's epicanthoplasty incision could give sufficient operative field to reattach the MCT in traumatic telecanthus patients. And the oblique transnasal wiring technique is effective for the Asians who have flat nose and exophthalmic eye. The authors conclude that this technique could be a simple, safe and scarless method to correct traumatic telecanthus.

• 한국환경복원기술학회지
• /
• 제24권2호
• /
• pp.103-114
• /
• 2021

The purpose of this study is to provide basic data for habitat restoration by implementing a series of processes of capturing and translocating Kaloula borealis and managing them in artificial breeding facilities. The study site in Samcheon, Jeonju-si, Jeollabuk-do was a waste landfill site in the past, and Kaloula borealis was found during the Samcheon Ecological River Restoration Project around March 2018. To restore the habitat, a plan was established to capture, translocate, artificially breed, and release Kaloula borealis at the site. The capture methods of adult Kaloula borealis were pitfall trap and drift fence, direct capture, and deep barrels. During 2018-2019, 86 adults of Kaloula borealis were captured and translocated to artificial breeding facilities. VIE-tagging was inserted under the skin for monitoring. For artificial breeding, Gryllus bimaculatus with oyster powder and vegetables were regularly supplied to feed Kaloula borealis. At the end of October 2020, 150 young Kaloula borealis raised in artificial breeding facilities were found not entering hibernation, so they were managed in a separate artificial breeding facility. Some young and adult Kaloula borealis currently hibernating will be scheduled to be continuously managed in artificial breeding facilities and released to the restored habitat in the spring of 2021.