• Advanced Composite Materials
• /
• 제16권1호
• /
• pp.11-30
• /
• 2007

Since delamination often propagates at the interfacial layer between a surface skin and a foam core, a crack arrester is proposed for the suppression of the delamination. The arrester has a semi-cylindrical shape and is arranged in the foam core and is attached to the surface skin. Here, energy release rates and complex stress intensity factors are calculated using finite element analysis. Effects of the arrester size and its elastic moduli on the crack suppressing capability are investigated. Considerable reductions of the energy release rates at the crack tip are achieved as the crack tip approached the leading edge of the crack arrester. Thus, this new concept of a crack arrester may become a promising device to suppress crack initiation and propagation of the foam core sandwich panels.

• 한국자동차공학회논문집
• /
• 제12권3호
• /
• pp.192-203
• /
• 2004

The AA5182/polypropylene/AA5182 (AA/PP/AA) sandwich sheets have been developed for the application for automotive body panels in the future light weight vehicles with significant weight reduction. It has been reported that the 5182 aluminum sheet shows Luders band because of dissolved Mg atoms that causes fabrication process problem, especially surface roughness. The examination of serration behavior has been made after the tensile deformation of the AA/PP/AA sandwich sheets as well as that of the 5182 aluminum skin at room and elevated temperatures. All sandwich sheets and the 5182 aluminum skin showed serration phenomena on their flow curves. However, the magnitude of the serration was significantly diminished in the sandwich sheet with the high volume fraction of the polypropylene core. According to the results of the surface roughness analysis after the tensile test, the sandwich sheet evidently showed lower Luders band depth than the 5182 aluminum skin. Strain rate sensitivity, m-value, of the 5182 aluminum skin was -0.006. By attaching this skin with polypropylene core which has relatively large positive value, 0.050, m-value of the sandwich sheets was changed to the positive value. The serration reduction of the sandwich sheets was quantitatively investigated in the point of the effect on the polypropylene core thickness variation, that on the strain rate sensitivity. It was found that the serration reduction degree from the experimental results of the sandwich sheet was higher than that from the calculated values by the rule of mixture based on volume fraction of the skins and the core.

• International Journal of Automotive Technology
• /
• 제7권4호
• /
• pp.485-492
• /
• 2006

The AA5182/polypropylene/AA5182(AA/PP/AA) sandwich sheets have been developed for application to automotive body panels in future lightweight vehicles with significant weight reduction. It has been reported that the AA5182 aluminum sheet shows $L\"{u}ders$ band because of dissolved Mg atoms that cause fabrication process problem, especially surface roughness. The examination of serration behavior has been made after the tensile deformation of the AA/PP/AA sandwich sheets as well as that of the AA5182 aluminum skins at room and elevated temperatures. All sandwich sheets and the AA5182 aluminum skin showed serration behavior on their flow curves. However, the magnitude of serration was significantly diminished in the sandwich sheet with high volume fraction of the polypropylene core. According to the results of the analysis of the surface roughness following the tensile test, $L\"{u}ders$ band depth of the sandwich sheet evidently showed lower than that of the AA5182 aluminum skin. The strain rate sensitivity, m-value, of the AA5182 aluminum skin was -0.006. By attaching these skins to the polypropylene core, which has relatively large positive value of 0.050, m-value of the sandwich sheets changed to the positive value. The serration mechanism of the sandwich sheets was quantitatively investigated in the point of the effect on polypropylene thickness variation, that on the strain rate sensitivity and that on the localized stress state.

• Food Science and Biotechnology
• /
• 제15권1호
• /
• pp.39-43
• /
• 2006

Levels of quercetin in different parts of onion were investigated using high performance liquid chromatography (HPLC) and liquid chromatography mass spectrometry (LC/MS) suitable for use with functional food material. Two main peaks were observed on HPLC chromatograms from the extracts of the skin, and the outer, middle, and core parts of onion. Using LC/MS, peak 1 was tentatively identified as quercetin monoglucoside at m/z 466.4, and peak 2 as quercetin with [M]+ at m/z 303.3. The levels of quercetin in the skin, and the outer, middle and core parts of the plant were 16.83,2.67,0.95, and 0.35 mg/g, respectively. In the study of 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging activity, skin, the nonedible part, contained the highest amount of quercetin, compared to the other edible parts, and showed the highest DPPH radical scavenging activity. Levels of quercetin and DPPH radical scavenging activity increased from core to skin. All parts of onion exhibited the strongest antibacterial activity only against Staphylococcus aureus and Vibro parahaemolyticus. Antibacterial activities of onion exhibited that S. aureus was more sensitive than V. parahaemolyticus. Among the four onion extracts, the middle part showed the strongest inhibitory activity against S. aureus but all onion extracts showed similar antibacterial activities against V. parahaemolyticus.

• Composites Research
• /
• 제18권1호
• /
• pp.30-37
• /
• 2005

본 연구에서는 3점 굽힘 실험과 코어의 실제 형상을 모델링한 유한요소 시뮬레이션을 병행하여 외피층의 항복, 층간분리 코어의 전단 및 국부적 좌굴과 같은 다양한 파손모드를 고려한 하니컴 샌드위치 복합재료의 강도 특성과 변형거동을 검토하였다. 외피층과 하니컴 코어층 사이를 완전 접착한 시험편과 부분 층간분리 시험편을 대상으로 하니컴 코어의 셀 크기와 외피층 두께를 변화시켜 시험편의 굽힘 강성, 굽힘 강도. 굽힘 응력, 변형 및 파손 거동을 해석하였다. 결론적으로 하니컴 코어의 셀 크기와 외피층의 두께가 하니컴 샌드위치 복합재료의 굽힘 강성과 강도, 변형/파괴 거동에 주된 영향을 미쳤으며 코어의 셀 크기가 크고 외피층의 두께가 얇은 경우 굽힘 강도는 $30\~68\%$ 정도까지 저하됨을 알 수 있었다.

• Journal of the Korean Wood Science and Technology
• /
• 제31권2호
• /
• pp.38-44
• /
• 2003

플로쉬문은 우리나라에서 가장 일반적으로 사용되는 문으로서 가정용으로부터 영업용 문까지 그 용도가 다양하다. 플러쉬문의 제작방법은 거의 변화가 없이 남양재 골조 위에 합판덮개를 덮어서 본체를 구성하는 형태가 계속 사용되고 있다. 그러나 목재 시장과 판재 시장의 수요와 공급 상황이 변하기 때문에 이에 맞추어서 플러쉬문의 제작에 사용되는 재료의 선택도 달라져야 할 것이다. 이 연구에서는 플러쉬문의 제작에 HDF를 덮개 및 골조재료로 사용하고자 하였으며 일반적인 제작방법에 의하여 생산된 스킨문과 그 성능을 비교하였다. 시험용 문들을 여름과 겨울의 계절에 따라서 변하는 실내의 온도 및 습도환경에 3-4개월 동안 노출시키고 문의 변형과 온도 및 상대습도를 1주일 단위로 측정하였다. 이 연구의 결과로부터 HDF가 플러쉬문의 덮개 및 골조용 재료로 사용될 수 있음을 알 수 있었으며 이 연구에서 개발된 골조의 구성방법에 의하여 생산된 플러쉬문이 일반적인 스킨문보다 매우 우수한 성능을 나타내었다. 문의 변형은 온도 및 상대습도가 증가할수록 증가하는 경향을 나타내었으며 플러쉬문이 전반적으로 스킨문보다 적은 변형을 나타냄으로써 환경변화에 대응하여 스킨문보다 안정적이고 좋은 성능을 나타냄을 알 수 있었다.

• 전기전자학회논문지
• /
• 제16권4호
• /
• pp.375-381
• /
• 2012

본 연구에서는 멀티코어에서 피부색 정보와 병렬처리를 이용하여 Viola-Jones 알고리즘을 설계하였다. 불필요한 연산을 줄이고 빠른 검출 속도를 위해 기존의 얼굴 검출 방법 중 피부색을 이용한 얼굴 검출 알고리즘을 사용하여 배경영상을 삭제하였다. 병렬처리를 위해 알고리즘을 기능별로 분할하였고, 멀티코어에서 성능을 향상시키기 위해 의존성과 크기를 고려하여 독립적으로 동작되도록 설계하였다. Cortex-A9 멀티코어가 내장된 SoC에서 실험 결과 알고리즘을 분할하기 전에 비해 약 1.8배 빠른 검출 결과를 나타내었다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 춘계학술발표대회 논문집
• /
• pp.111-114
• /
• 2004

Using the embedded optical fiber sensor of totally-reflected extrinsic Fabry-Perot interferometer(TR-EFPI), longitudinal strains(Ex) of the core and skin layers in glass fiber reinforced plastic(GFRP) cross-ply composite laminates have been measured. Transmission optical microscopy was employed to study the damage formation around the TR-EFPI sensor. It was observed that values of ex in the interior of the skin layer and the core layer measured by embedded TR-EFPI sensor was significantly higher than that of the specimen surface measured by strain gauges. The experimental results agreed well with those from finite element analysis on the basis of uniform stress model. Large strains in the core layer led to the occurrence of transverse cracks which drastically reduced the strain at failure of optical fiber sensor embedded in the core layer.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 춘계학술발표대회 논문집
• /
• pp.42-45
• /
• 2001

The characteristics of smart skin for wireless LAN system under compression load are investigated. The smart skin structure is composed of 3 layers of face material and 2 layers of core material. Theoretical formula for determining buckling load is derived by Rayleigh-Ritz method and compared with experimental result. The maximum length of specimen that buckling does not occur is determined by only face material. In the experiment, if load supporting capability and the antenna property such as radiation pattern and reflection coefficient were examined.

• Composites Research
• /
• 제14권6호
• /
• pp.1-8
• /
• 2001

본 연구에서는 샌드위치 패널 구성 요소인 면재와 심재를 변화시켜 4종류의 샌드위치 패널을 제작하였다. 그리고 제작된 샌드위치 패널의 기계적 특성과 철도차량 개발시 중요한 요인으로 작용하는 음향투과 특성 그리고 화재에서의 안정성을 확인하기 위하여 난연특성 실험을 통하여 샌드위치 패널의 특성을 검토하고자 하였다. 샌드위치 패널의 기계적 특성은 알루미늄 면재 + 알루미늄 하니컴 심재로 구성된 샌드위치 패널이 면방향 인장강도와 변방향 압축강도 특성에서 우수하며 알루미늄 면재 + 노멕스 하니컴 심재로 구성된 샌드위치 패널은 면방향 압축강도와 굽힘 강도가 우수한 것으로 확인되었다. 알루미늄 면재 + PMI 포옴 심재로 구성된 샌드위치 패널은 심재의 전단강도 및 면재의 굽힙강도가 우수하였다. 난연성 시험에서는 phenol 수지 면재와 2종의 외국 면재는 모든 시험 결과에서 유사한 견과를 확인하였다.