• 수산해양기술연구
• /
• 제22권1호
• /
• pp.49-57
• /
• 1986

The vibrations problem of thin orthotropic skew plates of linearly varying thickness is analyzed using the small deflection theory of plates. Using dimensionless oblique coordinates, the deflection surface can be expressed as a polyonmial series satisfying the boundary conditions. For orthotropic plates which is clamped on all the four edges, numerical results for the first two natural frequencies are presented for various combinations of aspect ratio, skew angle and taper parameter. The properties of material used are one directional glass fibre reinforced plastic GFRP. The results obtained may be summarised as follows: 1. In case of the first mode vibration of plates with increase in the skew angle, the natural frequencies of plates decrease. 2. As the aspect ratio decrease, the natural frequencies of plates decrease. 3. For the identical skew angle, natural frequencies of plates increase with the taper parameter of thickness.

• 한국구조물진단유지관리공학회 논문집
• /
• 제5권3호
• /
• pp.203-211
• /
• 2001

This paper presents load transfer efficiency of skewed transverse joint of jointed concrete pavement with the fatigue model test. A 1/12 scale model was used to satisfy the geometry, loading, material similitude, which are variables to the skew angel of transverse joint. As the test results by fatigue load 700kgf applied, the deflection and stress of transverse joint were decreased as to increasing of skew angle of transverse joint. In addition, load transfer efficiency of transverse joint with skew angle is better than the load transfer efficiency of transverse joint without skew angle.

• 한국구조물진단유지관리공학회 논문집
• /
• 제21권1호
• /
• pp.67-73
• /
• 2017

본 연구에서는 LRB 받침을 갖는 플레이트 거더교를 해석 대상 교량으로 하고 편구배별 곡선반경과 사각을 해석변수로 하여 교량받침의 반력에 미치는 영향을 평가하고자 하였다. 지진파로는 El-Centro 지진 기록과 인공지진파를 각각 교축방향과 교축직각방향으로 적용하고 3D 해석을 수행하였다. 해석결과, 곡선교 내측과 예각부에서 부반력이 발생될 가능성이 높은 위치로 나타났으며, 또한, 교축 직각방향으로 지진이 작용하였을 때가 또한 가능성이 높은 조건으로 해석되었다. 그 이외에도 직선교보다는 곡선교이면서 곡률반경이 작고 사각이 작을수록 부반력의 발생 가능성이 높은 것으로 나타났다. 따라서 교량의 부반력 발생여부는 지진파의 종류 및 교량의 편구배, 곡선반경, 사각 등을 종합적으로 고려하여 검토하여야 할 것으로 판단된다.

• 한국콘텐츠학회논문지
• /
• 제3권1호
• /
• pp.14-20
• /
• 2003

문서 이미지 처리에서 텍스트 블록의 수평화 프로세스는 문서 인식 솔루션을 위한 전처리 단계로서 많은 연구가 진행되고 있다. 이 논문에서는 텍스트 이미지 블록의 직교각 속성과 형태 모멘트에 후프 변환을 적용하여 경사진 텍스트 블록을 원래 문서의 텍스트와 수평화된 텍스트 이미지로 변환하는 효율적인 방식을 제안한다. 실험을 통하여 제안된 방식의 비교 성능 결과를 보인다.

• Smart Structures and Systems
• /
• 제21권4호
• /
• pp.493-519
• /
• 2018

This article presents a finite element (FE) model to assess the free vibration and static response of a functionally graded skew magneto-electro-elastic (FGSMEE) plate. Through the thickness material grading of FGSMEE plate is achieved using power law distribution. The coupled constitutive equations along with the total potential energy approach are used to develop the FE model of FGSMEE plate. The transformation matrix is utilized in bringing out the element matrix corresponding to the global axis to a local axis along the skew edges to specify proper boundary conditions. The effect of skew angle on the natural frequency of an FGSMEE plate is analysed. Further, the study includes the evaluation of the static behavior of FGSMEE plate for various skew angles. The influence of skew angle on the primary quantities such as displacements, electric potential, and magnetic potential, and secondary quantities such as stresses, electric displacement and magnetic induction is studied in detail. In addition, the effect of power-law gradient, thickness ratio, boundary conditions and aspect ratio on the free vibration and static response characteristics of FGSMEE plate has been investigated.

• Computers and Concrete
• /
• 제23권5호
• /
• pp.361-376
• /
• 2019

In this research, bending analysis of a micro sandwich skew plate with isotropic core and piezoelectric composite face sheets reinforced by carbon nanotube on the elastic foundations are studied. The classical plate theory (CPT) are used to model micro sandwich skew plate and to apply size dependent effects based on modified strain gradient theory. Eshelby-Mori-Tanaka approach is considered for the effective mechanical properties of the nanocomposite face sheets. The governing equations of equilibrium are derived using minimum principle of total potential energy and then solved by extended Kantorovich method (EKM). The effects of width to thickness ratio and length to width of the sandwich plate, core-to-face sheet thickness ratio, the material length scale parameters, volume fraction of CNT, the angle of skew plate, different boundary conditions and types of cores on the deflection of micro sandwich skew plate are investigated. One of the most important results is the reduction of the deflection by increasing the angle of the micro sandwich skew plate and decreasing the deflection by decreasing the thickness of the structural core. The results of this research can be used in modern construction in the form of reinforced slabs or stiffened plates and also used in construction of bridges, the wing of airplane.

• 한국구조물진단유지관리공학회 논문집
• /
• 제7권1호
• /
• pp.199-206
• /
• 2003

This paper presents the fatigue life of transverse joint of concrete pavement with the fatigue model test. A 1/12 scale model was used to satisfy the geometric load, material similitude, which are variables to the skew angel of transverse joint. From the test results by fatigue load 700kgf applied, we can have that the fatigue life of transverse joint with skew angle is better than that of transverse joint without skew angle. In addition, we can have that the fatigue life of skewed transverse joint with angle of 10 degree is better than that of skewed transverse joint with angle of 20 degree.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제26권10호
• /
• pp.1193-1203
• /
• 1999

본 논문에서는 한글과 영문 문서 영상들에 대한 기울어짐 추정(skew estimation) 알고리즘을 제안한다. 제안 방법은 전체 문서 영상에서 텍스트 요소들이 밀집되어 있는 영역을 선별하고, 선별된 영역에 대해 허프 변환을 적용하는 선택적 주의집중(selective attention) 방식을 채택한다. 제안 방법의 기울기 추정 과정은 2단계로 구성되는데, coarse 단계에서는 전체 영상을 몇 개의 영역으로 나누고 동일한 영역에 속하는 데이타들간의 연결 각도를 계산하여 각 영역별 accumulator에 저장한다. accumulator에 저장된 빈도치를 기준으로 $\pm$45$^{\circ}$범위 내에서 최대 $\pm$1$^{\circ}$의 오차를 가진 각 영역별 기울기를 계산한 후, 이들 중 최대 빈도값을 갖는 영역을 선정하고 그 영역의 기울기 각도를 문서 영상의 대략적인 기울기 각도로 결정한다. Refine 단계에서는 coarse 단계에서 선정된 영역에 허프 변환을 적용하여 정확한 기울기를 계산하는데, coarse 단계에서 추정한 기울기의 $\pm$1$^{\circ}$범위 내에서 0.1$^{\circ}$간격으로 측정한다. 이와 같은 선택적 주의집중 방식을 통해 기울기 추정에 소요되는 시간 비용은 최소화하고, 추정의 정확도는 최대화 할 수 있다.제안 방법의 성능 평가를 위한 실험은 다양한 형태의 영문과 한글 문서 영상 2,016개에 적용되었다. 제안 방법의 평균 수행 시간은 Pentium 200MHz PC에서 0.19초이고 평균 오차는 $\pm$0.08$^{\circ}$이다. 또한 기존의 기울기 추정 방법과 제안 방법의 성능을 비교하여 제안 방법의 우수성을 입증하였다.Abstract In this paper we propose a skew estimation algorithm for English and Korean document images. The proposed method adopts a selective attention strategy, in which we choose a region of interest which contains a cluster of text components and then apply a Hough transform to this region. The skew estimation process consists of two steps. In the coarse step, we divide the entire image into several regions, and compute the skew angle of each region by accumulating the slopes of lines connecting any two components in the region. The skew angle is estimated within the range of $\pm$45 degree with a maximum error of $\pm$1 degree. Next we select a region which has the most frequent slope in the accumulators and determine the skew angle of the image roughly as the angle corresponding to the most frequent slope. In the refine step, a Hough transform is applied for the selected region within the range of $\pm$1 degree along the angle computed from the coarse step, with an angular resolution of 0.1 degree. Based on this selective attention strategy, we can minimize the time cost and maximize the accuracy of the skew estimation.We have measured the performance of the proposed method by an experiment with 2,016 images of various English and Korean documents. The average run time is 0.19 second on a Pentium 200MHz PC, and the average error is $\pm$0.08 degree. We also have proven the superiority of our algorithm by comparing the performance with that of other well-known methods in the literature.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 ITC-CSCC -1
• /
• pp.326-328
• /
• 2000

The paper proposes the scheme of skew detection for Thai printed document images by using linear regression algorithm. It intends to use with the Thai character recognition systems to reduce the skew detection time. This scheme begins by finding the center of gravity of a document image. This point is used as the starting point for gathering data in the scheme. The data is obtained by scanning incrementally one pixel in vertically with the width of 20-pixels. After the scanning process, if data Is different from it's neighbor more than ${\pm}$ 15 pixels, it will be considered as noise or data in other lines and will be deleted. The last step is the operation by using linear regression algorithm on these selected data and the skew angle will be obtained. The proposed method has been tested with 45 document images with different fonts, sizes and skew angles. The experiment results show that the proposed method can detect the skew angle with the error of less then one degree. The average processing time is about 19 times faster than that of the Hough Transform method.

• Structural Engineering and Mechanics
• /
• 제31권5호
• /
• pp.587-603
• /
• 2009

We performed a free vibration analysis of skew composite laminates with or without cutout based on the high-order shear deformation plate theory (HSDT). The effects of skew angles and ply orientations on the natural frequencies for various boundary conditions are studied using a nonlinear high-order finite element program developed for this study. The numerical results are in good agreement with those reported by other investigators for simple test cases, and the new results reported in this paper show the interactions between the skew angle, layup sequence and cutout size on the free vibration of the laminate. The findings highlight the importance of skew angles when analyzing laminated composite skew plates with cutout or without cutout.