• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.6
• /
• pp.1046-1056
• /
• 2001

For the purpose of standardizing sizing systems for infants and children's clothing, the researchers surveyed 20 different apparel manufacturers in Korea. The apparel production sizing systems used in the industry were analysed. The researchers also compared standard apparel sizing systems developed for infants and children's clothing in Korea. ISO, Japan, and U.S.A. The followings are the results of this study. 1. As survey findings of companies's views about sizing systems, boys or girls sizing system needed to be developed for 3 years old and over. The plus sizes are needed to be developed and children 9 years old and over need the plus size. 2. The body size specification in most sizing systems collected shows that chest circumference was increased 2cm for every infants sizes, and 3cm for boys and girls'sizes, from size 100 to size 130. However, the chest and waist circumference measurements were increased 4 to 8cm for large sizes, from size 130 to size 170. 3. There are similarity and dissimilarity among the standard sizing systems of ISO, Japan(JIS), U.S.A(ASTM), and Korea(KS). The ASTM developed infants'garment sizes for the babies who are 24months old and under. The most national standards, however, developed infant apparel sizing system for the babies under 105cm tall or 4 years old. 4. The range of body measurements covered by boys/girls sizing system were different by the nation. The U.S. system (ASTM) is for boys and girls who are taller than 120cm. The Japanese system(JIS) is for the children who are taller than 90cm.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.1 s.139
• /
• pp.157-166
• /
• 2005

The purpose of this study was to establish the upper garment sizing systems for elderly men. These were on the basis of classification of 294 elderly men's somatotypes aged between 60 and 80 with the extent of drop value and analysis of the sizing systems of men's wear companies. The results were as follows: First, the sizing systems of men's wear companies were established with priority given to the young and the middle whose heights were taller than the elderly. There was no sizing system only for elderly men in men's wear companies. Secondly, as the height range increased, the size of chest and waist proportionally increased; however, the waist sizes were limited to somewhat small size ranges. So the sizing systems of men's wear companies had difficulty in covering up the developed-waist somatotype of the elderly. Thirdly, only 1 company out of 10 established the sizing system according to the somatotype. Lastly, the total numbers of size which were established by this study according to somatotype were 40; 18 sizes were set for type A, 10 for type Y, and 12 for type B. The standard sizes were 97-88-165 for type A,94-79-165 for type Y, and 97-94-165 for type B.

• Journal of the Korean Home Economics Association
• /
• v.33 no.1
• /
• pp.187-202
• /
• 1995

The purpose of the study was to suggest ways of improvement of the present sizing systems for the middle aged women's clothing. For this, a questionnaire survey for the aged group and calculating coverage rate of one garment item(suit) between the companies has been carried out. The data was analyzed with use of SPSS package. The statistics were based o frequency, X2-test, t-test and one-way ANOVA. The results of the study was as follows: 1. In case of survey for middle aged women, the problems concerning the length and abdominal girth were found, that is to say, the former too long and the latter too tight. 2. The sizing systems between companies were very different in size classification and standard deviation of each sizes. 3. In calculating coverage rate of the 10 companies's sizing systems, coverage rate of the smallest size in each were the highest and those of the biggest were 0%. It means the standard deviation of the present sizing systems are not enough to cover the various body form of the middle aged women, so that the more diverse sizing system is required for the better fitness of middle aged women's clothing.

• The Research Journal of the Costume Culture
• /
• v.20 no.6
• /
• pp.923-936
• /
• 2012

Apparel companies define their target customers to integrate consumers' needs into their product development processes. The sizing standards play a significant role in ready-to-wear garment business. Consumers' body build and sizes are different according to gender, age, and body type. The consumers' morphological feature of the one geographical area has changed with immigration, aging, and lifestyle change. In this study the way of defining body types in the standard garment sizing systems published in USA., UK, Germany, Japan, and Korea were compared. The results of this study show that most of the systems classified the body types by the index value. The chest-waist drop value was used for men's body type classification. Women's body types were defined by hip proportion. The hip-bust drop value was used for it. German and European garment sizing systems provide a wide range of men's body types. US men's garment sizes are developed for very conservative body type. US women's garment sizing system has had clearly defined women's body types. The Misses body types projected in the US garment sizing system had changed as women's waist girth got bigger compared to the past. In 2011 the US Misses sizes were divided into Curvy Misses size and Straight Misses size by the hip-waist drop value. The Curvy Misses sizes have smaller waist girth and larger hip girth than the Straight Misses sizes.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.2
• /
• pp.159-166
• /
• 2014

The study is conducted on the subject of optimization of components sizing for series hybrid electric propulsion systems. The components sizing of series type hybrid system is very important because each component of series type is larger than the corresponding component of the parallel type or series-parallel type. If the components sizing is greater or less than what is required to this system, the performance of the system is getting worse. The methodology for the sizing of a driving motor is introduced based on the foundation of determined system configuration and performance target. And the sizing of an engine/generator and a battery is achieved based on simulation results using Dynamic Programming. It is possible to find the optimal sizing of these components by comparing fuel efficiency of hybrid electric propulsion system for 8 driving cycles.

• Journal of Electrical Engineering and Technology
• /
• v.6 no.6
• /
• pp.731-741
• /
• 2011

Conventional methodologies (empirical, analytical, numerical, hybrid, etc.) for sizing photovoltaic (PV) systems cannot be used when the relevant meteorological data are not available. To overcome this situation, modern methods based on artificial intelligence techniques have been developed for sizing the PV systems. In the present study, the optimum PV/inverter sizing ratio for grid-connected PV systems with orientation due south and inclination angles of $45^{\circ}$ and $60^{\circ}$ in selected Algerian locations was determined in terms of total system output using type-2 fuzzy logic. Because measured data for the locations chosen were not available, a year of synthetic hourly meteorological data for each location generated by the PVSYST software was used in the simulation.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.1
• /
• pp.119-130
• /
• 2004

The objective of this study was to develop a school uniform sizing system with high coverage rate for middle school boys, who are in the stage of rapid growth, by identifying problems in existing school uniform sizing systems through surveys of students and uniform manufacturing companies, and analyzing juveniles' physical sizes. For this purpose. the study conducted a survey about how middle school boys choose their uniform sizes, and what complaints they have on the size of the uniforms. In addition, it was investigated what is the current state of uniform manufacturing and sizing systems through a survey of uniform companies, and the study identified problems in the size of school uniforms by comparing physical sizes of juveniles' aged 14 to 16 with the sizing systems of the companies and KS standards in 1997. Juveniles' physical data was a part of the material of the national anthropometric data in 1997. Using the two-way distribution of juveniles' height-bust girth and height-waist girth, this study established the sizing system by increasing the number of sizes for the short interval where juveniles' physical sizes are densely distributed whereas limiting the number of sizes for the long interval where juveniles' physical sizes are rarely distributed, considering the difference between companies' standard and KS' standard.

• Journal of the Ergonomics Society of Korea
• /
• v.33 no.5
• /
• pp.337-354
• /
• 2014

Objective: The purpose of this study was to examine the various sizing systems and specified anthropometric data as well as the fit issues used today. Background: A standard sizing system for clothes is a system that is developed based on body shape and size classifications method. To develop an efficient sizing system, we have to classify the database from the majority of the samples. Method: The method of this paper deals with the secular trend of height spanning from 1997 to 2010 along with the morphological feature patterns for Koreans. It also investigates the comparison of the growth pattern between male and female and the body shape classification according to the drop values based on the anthropometric data samples of KATS taken from the 2010 surveys in order to develop and define the new guidelines for the size designation systems of clothes. Results: The results are classified with body size and shape categories according to the drop values by age and sex in order to develop the new guidelines for the size designation systems based on these body dimensions from the analyzed anthropometric database. Conclusion: These new guidelines for the size designation system will eliminate the confusion that currently exists among countries and individual apparel designers. Application: The adopted standards could be used to compare the sizing systems worldwide.

• Journal of Korean Society for Quality Management
• /
• v.18 no.1
• /
• pp.65-76
• /
• 1990

A lot-sizing model for multi-stage MRP systems is proposed, in which known demands must be satisfied. In this model, an approach with considerations of initial inventory and limited production capacity is involved. Most of the studies on the lot-sizing techniques for multi-stage material requirement planning systems have been focused upon two basic approaches. One approach is to develope an algorithm yielding an optimal solution. Due to the computational complexity and sensitivity of the optimal solution to the problem of lot sizing, heuristic approaches are often employed. In this paper, the heuristic approach is used by sequential application of a single-stage algorithm with a set of modified cost by the concept of multi-echelon costs. The proposed method is compared with an lot-sizing method(Florian-Klein Model) to prove its effectiveness by numerical examples.

• Fashion & Textile Research Journal
• /
• v.20 no.6
• /
• pp.733-743
• /
• 2018

This study aimed to investigate whether women's wear brands' sizing systems for pants item are reflecting body size and shape of their target age customers. This study classified 17 women's wear brands into three target age groups (20-30s, 30-40s, and 40-50s) and surveyed their body sizing systems of pants item. Distribution of waist circumference and hip circumference of brands' sizing systems were compared with size distribution of women in the 7th Size Korea data. The sizing systems of brands targeting 20-30s covered 28.3% and those of brands targeting 40-50s covered 27.3%, while those of brands targeting 30-40s covers 46.6%. Regarding the body types, 80% of 20-30s target brands reflected normal type which is the average body type. However, all 40-50s target brands reflected normal type while 57.8% of women aged 40-50s had large waist shape. The 30-40s target brands reflected body types the best among target age groups since the body shape distribution of the brands was similar to that of 30-40 year old woman in Size Korea. For each age group, 6 sizes with 25.2~27.8% coverage rates were proposed. The 70-91, 73-91, 73-94 sizes were overlapped between the 20-30s and the 30-40s groups. The 76-91, 76-94, 79-94 sizes were overlapped between the 30-40s and 40-50s groups. Pants size has been found to increase in waist circumference compared to hip circumference as age increased.