• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.6
• /
• pp.923-934
• /
• 2002

The aim of this study is to suggest a Sizing System which has following points:- 1. In order to satisfy children of diverse figure shapes, we developed sizing system for three different figure type. Figure types are categorized into slim, normal, fat type based on the Rohrer Index. 2. For each figure types, we developed size chart using height bust circumference and hip circumference as basic measurements. The size codes are presented as the height-bust circumference or height-hip circumference. The size interval of height is 5cm for all figure types, such as 120,125,130 ‥‥ we developed a size allocation program, which is helpful when a customer doesn't know exact measurement of some body dimension. If a customer input measurements as much as he/she hows, the program allocates the nearest. At the end of the study, the sizing interaction sites were developed to present the results of the study clear.

• 한국항공운항학회:학술대회논문집
• /
• 2016.05a
• /
• pp.9-13
• /
• 2016

Reaction drive rotor system is capable of providing hover and low speed capabilities to different aircraft concepts such as stopped rotor wing, canard rotor wing, compound gyroplane etc. Existing sizing and analysis tools for shaft drive rotor system cannot be applied directly to this system. The available methodologies to size this system were reviewed. Power available calculation procedure and factors affects it were addressed prior to sizing process. Various design issues of this system due to interrelationship of internal gas flow dynamics and rotor external aerodynamics was discussed. Finally, a modification that is required in existing sizing methodologies was identified and combined approach in sizing process to consider the interrelationship among engine, rotor and blade duct was introduced.

• Transactions of Materials Processing
• /
• v.14 no.9 s.81
• /
• pp.791-797
• /
• 2005

Extensive width reduction of slabs is an important technology for achieving continuous production between the steelmaking and hot rolling processes. However, the vertical horizontal rolling process has many disadvantages, e.g., large width deviations and less efficient width reduction. This study was carried out to investigate the deformation of slab by sizing press with two steps die. To do it, dog-bone and camber are discussed in width sizing process considering the deformation behavior according to the deviation of anvil velocity and the deviation of initial slab temperature. In this paper, the various causes of the sizing press phenomena are mentioned for the purpose of understanding of rolling conditions. As a result, the optimal anvil shape having a minimum-forming load is obtained by FE-simulation and ANN.

• 한국디지털정책학회:학술대회논문집
• /
• 2004.05a
• /
• pp.355-367
• /
• 2004

Interest about information infrastructure construction is decayed socially according to arrival of information age, and various information systems is constructed for efficient business processing, customer service improvement in public sector. According to subjective method of performance improvement for information system of public sector and engine that propel information system construction bemuse it is no definite hardware sizing guidelines for introduction or system caterer, is calculating resources scale of information system. Is situation that problem of excess of scale or reduction sizing is happening, and is causing various kinds problem that is waste of information budget and service decline thereby. So, We proposed hardware sizing framework for information system that is applied to information programs.

• Journal of Mechanical Science and Technology
• /
• v.15 no.12
• /
• pp.1801-1807
• /
• 2001

In multiphase flne the bubble size and velocity. To achieve this, one of approaches is to utilize laser phase-Doppler anemometry. However, it was found that the second order refraction has great impact on PDA sizing method when the relative refractive index of media is less than one. In this paper, the problem of second order refraction is investigated and a model of phase-size correlation to eliminate the measurement errors is introduced for bubble sizing. As a result, the model relates the assumption of single scattering mechanism in conventional phase-Doppler anemometry. The results of simulations based on this new model by using Generalized Lorenz Mie Theory (GLMT) are compared with those based on the conventional method. An optimization method for accurately sizing air-bubble in water has been suggested.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06b
• /
• pp.391-394
• /
• 2006

Studied that the relationship between the charge density of PAC and its alkalinity, as well as the influences of PAC in paper sizing. Study results showed that PAC with higher charge density brought higher sizing degree when the same amount of $Al_{2}O_{3}$ content was dosed. However, there was no direct relationship between PAC charge density and its alkalinity, and higher PAC alkalinity can't improve its charge density. It was also found that the admixture (PPAC) of polyamine and PAC had higher charge density than PAC. The effects of PPAC on DRS and RAKD sizing were better than PAC sizing, when dosage and other sizing condition were the same.

• Journal of Korean Society for Quality Management
• /
• v.18 no.1
• /
• pp.65-76
• /
• 1990

A lot-sizing model for multi-stage MRP systems is proposed, in which known demands must be satisfied. In this model, an approach with considerations of initial inventory and limited production capacity is involved. Most of the studies on the lot-sizing techniques for multi-stage material requirement planning systems have been focused upon two basic approaches. One approach is to develope an algorithm yielding an optimal solution. Due to the computational complexity and sensitivity of the optimal solution to the problem of lot sizing, heuristic approaches are often employed. In this paper, the heuristic approach is used by sequential application of a single-stage algorithm with a set of modified cost by the concept of multi-echelon costs. The proposed method is compared with an lot-sizing method(Florian-Klein Model) to prove its effectiveness by numerical examples.

• Journal of the Ergonomics Society of Korea
• /
• v.16 no.1
• /
• pp.47-61
• /
• 1997

A statistical method was developed to examine the US navy women's sizing system. Subjects including 906 navy female personnels were classified into seven groups based on the body type. Regression analyses were performed within seven groups to determine the sizing system maximizing the fitness of clothing in each group. New parameters were developed and used to statistically investigate the fitness level based upon boty navy sizing system and regression based system in this study. A customizef SAS program was used to compute the fitness levels. Results indicated that the navy sizing system showed lower fitness level in most groups except Juniour than the regression based system. It was concluded that the current method with new parameters could be used as an objective tool to evaluate the existing or new sizing system. This method can be further validated in other sample populations.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.8
• /
• pp.2458-2467
• /
• 1996

The rigid-plastic finite element analysis was performed for analysis of ofhot forging and cold sizing of a bevel gear. Two dimensional analysis was carried out to investigate the defect occurrence on vertical symmetric planes during hot forging and three dimensional analysis was to understand the filling behavior on horizontal planes during cold sizing. The involute curve of a tooth was approximated by a circle for convenience in the present analysis. In order to estimate the elastic deformation of the gear and dies during cold sizing, linear elastic finite element analysis was performed. Results of the analysis can be used to predict grain flows and strength distributions in the forged gear, and to design dies and an appropriate preform for the cold sizing.

• Journal of Korean Association for Spatial Structures
• /
• v.21 no.1
• /
• pp.61-70
• /
• 2021

This paper describes a novel zero-stress member selecting method for sizing optimization of truss structures. When a sizing optimization method with static constraints is implemented, the member stresses are affected sensitively with changing the variables. However, because some truss members are unaffected by specific loading cases, zero-stress states are experienced by the elements. The zero-stress members could affect the computational cost and time of sizing optimization processes. Feature selection approaches can be then used to eliminate the zero-stress member from the whole variables prior to the process of optimization. Several numerical truss examples are tested using the proposed methods.