• 대한원격탐사학회지
• /
• 제6권2호
• /
• pp.89-113
• /
• 1990

The purpose of this study is to develop means to apply GIS and remote sensing technology to the analysis of Korean urban open spaces. To achieve this objective, a framework of analysis of urban open spaces was developed, and then the framework was applied for the evaluation of the potential and suitability of open spaces of Ansan City, which is a new town developed to accomodate industries relocation from Seoul, Korea, mainly due to their pollution problems. The software used in this study are IDRISI, a grid-based GIS, and KMIPS, a remote sensing analysis system. Both packages are based on IBM PC/AT computers with Microsoft DOS. Landsat MSS and TM data were used for the land use classification, land use change detection, and analysis of transformed vegetation indices. The size of the geographic data base is 110 rows and 150 columns with the spatial resolution of 100m$\times$100m. The framework of analysis includes both quanititative and qualitative analysis of open spaces. The quantitative analysis includes size and distribution of open spaces, urban develpment of open spaces, and the degree of vegree of vegetation removal of the study area. The qualitative analysis includes evaluative criteria for primary productivity of land, park use potential, major visual resources, and urban environmental control. The findings of this study can be summarized as follows. First, the size of builtup areas increased 18.73km$^2$, while the size of forest land decreased 10.86km$^2$ during last ten years. Agricultural lands maintained its size, but shifted toward outside of the city into forest. Second, the potential of open spaces for park use is limited mainly due to their lack of accessibility and connectivity among open spaces, in spite of ample acreage and good site conditions. Third, major landscape elements and historic sites should be connected to the open space system of the city by new accesses and buffers.

• 상하수도학회지
• /
• 제11권1호
• /
• pp.109-118
• /
• 1997

In this study, we examined the structural analysis of water demand fluctuation for water distribution control of water supply network. In order to analyze for the length of stationary time series, we calculate autocorrelation coefficient of each case equally divided data size. As a result, it was found that, with the data size of around three months, any case could be used as stationary time series. we analyze cross-correlation coefficient between the daily water consumption's data and primary influence factors. As a result, we have decided to use weather conditions and maximum temperature as natural primary factors and holidays as a social factor. Applying the multiple ARIMA model, we obtains an effective model to describe the daily water demand prediction. From the forecasting result, even though we forecast water distribution quantity of the following year, estimated values well express the flctuations of measurements. Thus, the suitability of the model for practical use can be confirmed. When this model is used for practical water distribution control, water distribution quantity for the following day should be found by inputting maximum temperature and weather conditions obtained from weather forecast, and water purification plants and service reservoirs should be operated based on this information while operation of pumps and valves should be set up. Consequently, we will be able to devise a rational water management system.

• Carbon letters
• /
• 제15권3호
• /
• pp.214-217
• /
• 2014

A filtration-taping method was demonstrated to fabricate carbon nanotube (CNT) emitters. This method shows many good features, including high mechanical adhesion, good electrical contact, low temperature, organic-free, low cost, large size, and suitability for various CNT materials and substrates. These good features promise an advanced field emission performance with a turn-on field of $0.88V/{\mu}m$ at a current density of $0.1{\mu}A/cm^2$, a threshold field of $1.98V/{\mu}m$ at a current density of $1mA/cm^2$, and a good stability of over 20 h. The filtration-taping technique is an effective way to realize low-cost, large-size, and high-performance CNT emitters.

• 대한기계학회논문집B
• /
• 제30권4호
• /
• pp.287-297
• /
• 2006

The Holographic Particle Velocimetry system can be a promising optical tool for the measurements of three dimensional particle velocities. One of inherent limitations of particle holography is the very long depth of field of particle images, which causes considerable difficulty in the determination of particle positions in the optical axis. In this study, we introduced three auto-focusing parameters corresponding to the size of particles, namely, Correlation Coefficient, Sharpness Index, and Depth Intensity to determine the focal plane of a particle along the optical axis. To investigate the suitability of the above parameters, the plane image of dot array screens containing different size of dots was recorded by diffused illumination holography and the positions of each dot in the optical axis were evaluated. In addition, the effect of particle position from the holographic film was examined by changing the distance of the screen from the holographic film. All measurement results verified that the evaluated positions using suggested auto-focusing parameters remain within acceptable range of errors. These research results may provide fundamental information for the development of the holographic velocimetry system based on the automatic image processing.

• Archives of Reconstructive Microsurgery
• /
• 제16권2호
• /
• pp.53-56
• /
• 2007

Purpose: Microsurgical exercise has been performed with rat femoral vessels. But, it needs animal laboratory, anesthesia and its keeping facilities. Materials and Methods: Ten human placentas were studied for suitability in a microvascular exercise. The size and useful length of vessels were measured, and various microvascular anastomoses were performed. Result: The human placenta has many vessels traversing its fetal surface. A variety of sizes are available down to vessels of diameter 1 mm and up to vessels of diameter 6.5 mm (1.0

• Steel and Composite Structures
• /
• 제21권6호
• /
• pp.1327-1345
• /
• 2016

$Al_2O_3$/SiC particulate reinforced (Metal Matrix Composites) MMCs which were produced by using stir casting process, bending strength and hardening behaviour were obtained using an analysis of variance (ANOVA) technique that uses full factorial design. Factor variables and their ranges were: particle size $2-60{\mu}m$; the stirring speed 450 rpm, 500 rpm and the stirring temperature $620^{\circ}C$, $650^{\circ}C$. An empirical equation was derived from test results to describe the relationship between the test parameters. This model for the tensile strength of the hybrid composite materials with $R^2$ adj = 80% for the bending strength $R^2$ adj = 89% were generated from the data. The regression coefficients of this model quantify the tensile strength and bending strengths of the effects of each of the factors. The interactions of all three factors do not present significant percentage contributions on the tensile strength and bending strengths of hybrid composite materials. Analysis of the residuals versus was predicted the tensile strength and bending strengths show a normalized distribution and thereby confirms the suitability of this model. Particle size was found to have the strongest influence on the tensile strength and bending strength.

• 한국지반공학회논문집
• /
• 제23권11호
• /
• pp.39-48
• /
• 2007

지금도 불포화토의 특성곡선에 대한 연구는 계속 진행되고 있지만, 지금까지 발표된 특성곡선은 흙의 한가지 상태나 특성을 나타내도록 유도되어 광범위한 적용이 어려운 것은 사실이다. 따라서, 흙의 상태를 범용적으로 나타낼 수 있는 특성곡선을 개발하기 위해서는 현재까지 발표된 특성곡선의 적용성을 평가하여 문제점을 파악하는 것이 필요하다. 따라서 본 연구에서는 화강풍화토를 대상으로 함수특성곡선실험을 실시한 결과를 바탕으로 간극비에 따른 흙-수분 특성곡선 방정식을 분석하여 간극비에 따른 포화도를 예측하였으며 기존에 제안된 특성식에 대하여 적용성을 검증하였다.

• Communications for Statistical Applications and Methods
• /
• 제31권4호
• /
• pp.377-391
• /
• 2024

Accurate household projections are essential for sectors such as housing supply and tax policy planning, given the rapid social changes like declining birthrates, an aging population, and a rise in single-person households that impact household size and type. Korea introduced its first register-based census in 2015, transitioning from five-year general survey-based approach to an annual administrative data-based census. This change in census allows for more frequent and effective capturing the rapid demographic shifts and trends. However, this change in census has caused challenges in future projection by the existing household projection model due to the rapid dynamics. This paper proposes a new household projection method, the N-point Modified Exponential Model (MEM), that accurately reflects register-based census data and mitigates the impact of rapid demographic changes, in three types: the Weighted N-point MEM, the Regression-based N-point MEM, and the Rolling Weighted N+point MEM. Using register-based census data from 2016 to 2020 to forecast household headship rates by age, household size, and household type to 2051, the N-point modified exponential model outperformed the existing model in both long- and short-term forecast accuracy, suggesting its suitability as a future household projection model for Korea.

• 한국의상디자인학회지
• /
• 제13권1호
• /
• pp.37-46
• /
• 2011

To design a beautiful hood fitting an unspecific individual, focusing on body parts such as the head, neck and shoulder requires body size and type information, which applied by physical factors like size, types, and movements, etc. These parts consist of complicated types and structures. Accurate information should be a priority due to great individual differences and low correlation with other body parts. However, there is not a lot of detailed physical information nor design methods for hood design. Therefore, the purpose of this study is to select a study sample "hood" which is a recently emerging fashion item and to expand the necessary physical information for pattern design and draw body size of wearing part on Hood like head, cerbical portion and shoulder. Extract factors to consist on types and after divided into several types, a study comparing each type's physical characteristics was conducted. In order to do that, body measurement data have been collected by statistical treatment and analyzed reference with statistical treatment. The results of the study are predicted to be important data to develop various hood designs for the recent fashion trend. Factor analysis was conducted through main composition analysis about direct measured item on human body and index items. The results of factor analysis, composed factors of body type in this research object were extracted in total of 3 factors. To categorize the head, neck and shoulders of women in their early 20s women and determine their characteristics, variances with factor analysis became operative for Cluster analysis. With these clusters, women in their early 20s were categorized into three types. The results of this study are considered to affect largely for higher physical suitability on unspecified individuals when allowed absence of reference and the fact that body size only limited to item 'head circumstance' in terms of making hat and hood in the case of recent Korea. For the future, an experimental study of hood production should be conducted by using basic data from this study.

• 한국의류산업학회지
• /
• 제18권3호
• /
• pp.327-337
• /
• 2016

The purpose of this study is for size suitability and fitness improvement for Korean 20's women. This study has classified hip types of 20's women by the 6th Korean Anthropometric Survey(Size Korean), then compared their lower body-type by hip types each other. The results are as follows. Factor analysis in sorting hip types can be explained 77.72% by nine factors. And cluster analysis can be divided into three types. Type 1 is referred to as a general type which has the largest size in the 'Hip circumference', but the buttocks's horizontal sizes are in the middle size besides the hip line. Type 2 is referred to as a protruding type in upper buttocks which is large in protruding volume of upper buttocks, but the buttock's horizontal sizes are small including 'Hip circumference', and buttock's horizontal section form close to circle. Type 3 is referred to as a type which is contrary to Type 2. Type 3 is small in protruding volume of upper buttocks, but large in lower buttocks, and the protrusions in whole buttocks are small, so the side view of Type 3 made gentle fit shape. By these results, the study could classify lower body of 20's women, and it can be basic data for new sizing systems and pattern development of bottoms.