• 한국의류산업학회지
• /
• 제10권1호
• /
• pp.83-91
• /
• 2008

This study was designed to figure out the changes in elderly women's foot size and shape by aging, to propose size specification for elderly women's shoes, and to produce regression equations using representative measurements items to estimate other measurements usually hard to get. Subjects were 118 women of 30-59 years and the 227 elderly women over 60 years. Martin's anthropometry was done on the right foot of each subject for 25 items. And 11 indirect measurement items were measured on both foot printing sole outline and picture in profile taken by digital camera. For statistical analysis on the anthropometric measurements by SPSS program, analysis of variance, post-hoc test(SNK-test), crosstabulation, multiple correlation analysis, regression analysis were performed. The results of the study are as follows. Firstly, it was found that the foot figures of elderly women over 60 years were smaller in girth and width than those of below 60 years. In addition, it was revealed that a big toe and a little toe of elderly women showed a tendency concentrating to the central axis of feet. The foot index of elderly was smaller in width and girth. Secondly, foot size distribution table of elderly group showed wider size ranges and covered smaller sizes than the below the age of 60, meaning wide variation in foot size of elderly women. Thirdly, the multiple correlation analysis showed high correlation of foot length/girth to other measurements, suggesting these two items could be used as representative items for elderly women's shoe size specification as other age groups. Regression equations were produced using foot length/girth to estimate other measurements, suggesting such items could be estimated effectively and utilized in on/off-line shoe manufacturing shop as heel to big toe length, heel to little toe length, exterior malleouls width, instep girth, ankle girth, etc. These results imply prudent features of elderly women's foot as diversity of foot shape and wide size specification range should be applied for ergonomic shoe design for them.

• 한국안광학회지
• /
• 제18권4호
• /
• pp.555-560
• /
• 2013

목적: 부등상시의 교정은 좌우 망막상의 크기를 같게 하는 것이다. 본 연구는 부등상시의 등상시 렌즈 처방에 의한 입체시 능력과 자각적인 증상에 대하여 알아보고자 하였다. 방법: 안질환이 없고 약시가 진행되지 않은 교정시력 1.0 이상의 근시성 부등시 환자 중에 양안 굴절도 차이가 1.75~3.50 D 대상으로 양안 완전교정 상태에서 일반적인 안경처방과 부등상시를 교정할 수 있는 등상시 렌즈처방을 통해 Awaya' aniseikonia test통해 부등상시도 검사와 Randot stereo test 통해 양안시 최종 목적인 입체시 검사를 실시하였고, 자각적인 증상에 대한 설문을 실시하였다. 결과: 부등시가 증가할수록 안경교정으로 발생한 부등상시는 증가하는 것으로 나타났고, 같은 굴절양의 부등시에서도 부등상시도의 차이는 개인에 따라 다르게 나타났다. 등상시 렌즈 처방이 일반적인 안경처방보다 더 작은 부등상시를 유발 하였고, 입체시는 향상되는 것으로 나타났으며, 안정피로는 개선되는 것으로 나타났다. 결론: 부등시의 안경처방 시 부등상시를 교정할 수 있는 등상시 렌즈처방을 통해 입체시 향상과 함께 부등상시성 안정피로를 줄일 수 있음을 알 수 있었다.

• 한국의류학회지
• /
• 제25권4호
• /
• pp.719-730
• /
• 2001

The purpose of this study is to develop the basic patterns of adult womens brassiere therewith, provide for some basic data useful to the brassiere manufacturing which are both functional and fitting. For this purpose, 220 adults women(aged between 20 and 59) were sampled to be measured for their body sizes and tested for their brassiere wearing. The collected data were statistically processed using the SAS 6.12 for Means, Standard Deviation, etc. The results of this study can be summarized as follows; 1. In order to develop the basic patterns of adult womens brassieres, 75A size was selected out of 12 size combination(3 women per 75A size) and then, their brassiere fitting was tested. As a result, the fronts of the basic patterns were found to have such problems as undone front center, poor levelling of upper cups bottom line or lower cups top line, poor shape of upper cups outside top line and shoulder strip position. On the other hand, n the rear side of the basic patterns, the central part of the wing was slightly lifted, while the wing width and straps interval did not befit the full-cup brassiere. The result of this first brassiere fitting test showed that the functionality and aesthetics of the basic pattern brassieres were more or less satisfactory, and thus, the problems were address for the second test. In the second test, the aesthetics, breast-shaping effect and functionality of the basic pattern brassieres were much improved. 2. The basic patterns of adult womens brassieres were characterized by a round cup wired as well as a full cup embracing the entire breasts. Each basic pattern which consisted of upper and lower cups was shaped \"straight(-)\". The basic sizes adopted at the first design stage (see fig. 1-2) was 75A of which was designed as upper foundation basic pattern. At the second stage, the upper body foundation pattern were used to design lower cup, upper cup, front panel and wing in their order.(see fig. 3-5, fig. 8)5, fig. 8)

• 지역사회간호학회지
• /
• 제31권1호
• /
• pp.1-12
• /
• 2020

Purpose: The purpose of this study was to identify the factors influencing organizational commitment of staffs according to the size of long-term care facility. Methods: A cross-sectional descriptive study was designed. Data collection was conducted for a total of 315 employees in long-term care facilities located in Seoul, Gyeonggi, Gangwon, Gyeongbuk, and Chungnam. Data were collected from July 2018 to October 2018 using questionnaires which included emotional labor, job satisfaction, organizational commitment, and general characteristics. In order to confirm the differences in the size of the facility, the facilities with less than 30 beds, those with 30-99 beds, and those with more than 100 beds were analyzed. Data were analyzed using descriptive statistics, t-test, ANOVA, Mann-Whitney U test, Kruskal-Wallis H test, Pearson's correlation analysis, and multiple regression. Results: The job satisfaction and organizational commitment were significantly different according to the size of long-term care facility. Organizational commitment was influenced by 'external job satisfaction' in less than 30 beds, was influenced by 'external job satisfaction, and attentiveness to required display rules of emotional labor' in 30~99 beds, and then was influenced by 'type of job, and internal job satisfaction' in more than 100 beds. The predict variables accounted for 23.0%, 41.0%, and 34.0% of organizational commitment respectively. Conclusion: These findings show that tailored interventions should be provided depending on the size of facility in order to increase organizational commitment. In addition, organizational commitment programs should be developed by considering strategies to reduce the emotional labor and to increase job satisfaction.

• 한국의류학회지
• /
• 제41권1호
• /
• pp.43-59
• /
• 2017

This study used data from a survey of adult Korean women in their twenties to learn their current practices for wearing and purchasing tight-fit jeans available on the market as well as perceptions regarding size measurements and satisfaction levels. We then determined product sizes and pattern measurements for the type of jeans worn. This study also analyzed discrepancies in product size measurements among brands to determine whether the measurements were generally suitable for average body shapes and measurements of women in their twenties. The study results were as follows. First, the survey asked women in their twenties about current practices in wearing jeans. Many respondents answered that their preferred fit is "a perfectly snug fit" and that the most common fit style of jeans was the skinny fit. Second, we selected a test pair of jeans with an identical fiber content from brands that women prefer to wear, according to the survey results. We researched the product measurements of the size respectively labeled 27 inches for each of the 8 brands' test jeans; consequently, the results showed that there were significant differences among the brands in the product measurements of each part of jeans. Third, we analyzed the pattern measurements of 8 selected brands for each area and identified pattern characteristics by brand.

• 한국전산구조공학회논문집
• /
• 제18권4호통권70호
• /
• pp.405-416
• /
• 2005

본 연구에서는 경수로용 핵연료집합체의 전체지지격자(Full Size Grid)와 부분지지격자(Small Size Grid)에 대한 정적 좌굴강도 실험과 전체 지지격자와 부분지지격자를 구성하는 지지격자판(Grid Strap)에 대한 정적 좌굴해석을 수행하여 지지격자의 좌굴특성을 분석하였으며, 분석결과를 이용하여 전체지지격자와 부분지지격자에 대한 좌굴하중값의 예측 가능성을 평가하였다. 좌굴강도 실험은 웨스팅하우스형 연료의 $17{\times}17$셀을 갖는 전체지지격자와 $1{\times}1,\;1{\times}2,\;1{\times}3,\;1{\times}4,\;1{\times}5,\;1{\times}17\;,2{\times}1,\;2{\times}2,\;2{\times}3,\;2{\times}9,\;2{\times}17,\;3{\times}17$ 등의 셀을 갖는 부분지지격자에 대하여 수행하였으며, 실험결과를 이용하여 지지격자의 좌굴강도와 지지격자의 행(rows)과 열(columns) 사이의 관계식을 제시하였다. 좌굴강도 해석은 범용 유한요소해석코드인 ANSYS를 이용하여 수행하였으며, 해석결과를 이용하여 지지격자의 좌굴특성을 분석하고 실험결과와 비교평가 하였다.

• Restorative Dentistry and Endodontics
• /
• 제46권4호
• /
• pp.57.1-57.9
• /
• 2021

Objectives: This study aimed to compare and evaluate the porosity and pore size distribution of high-viscosity glass ionomer cements (HVGICs) and conventional glass ionomer cements (GICs) using micro-computed tomography (micro-CT). Materials and Methods: Forty cylindrical specimens (n = 10) were produced in standardized molds using HVGICs and conventional GICs (Ketac Molar Easymix, Vitro Molar, MaxxionR, and Riva Self-Cure). The specimens were prepared according to ISO 9917-1 standards, scanned in a high-energy micro-CT device, and reconstructed using specific parameters. After reconstruction, segmentation procedures, and image analysis, total porosity and pore size distribution were obtained for specimens in each group. After checking the normality of the data distribution, the Kruskal-Wallis test followed by the Student-Newman-Keuls test was used to detect differences in porosity among the experimental groups with a 5% significance level. Results: Ketac Molar Easymix showed statistically significantly lower total porosity (0.15%) than MaxxionR (0.62%), Riva (0.42%), and Vitro Molar (0.57%). The pore size in all experimental cements was within the small-size range (< 0.01 mm³), but Vitro Molar showed statistically significantly more pores/defects with a larger size (> 0.01 mm³). Conclusions: Major differences in porosity and pore size were identified among the evaluated GICs. Among these, the Ketac Molar Easymix HVGIC showed the lowest porosity and void size.

• 한국입자에어로졸학회지
• /
• 제19권4호
• /
• pp.155-164
• /
• 2023

APS (Aerodynamic Particle Sizer) and OPC (Optical Particle Counter) have been widely used to real-time measurement of indoor and outdoor aerosols. The APS measures the size distribution based on an aerodynamic diameter, while the OPC uses optical diameter to measure the size distribution of aerosols. Since obtaining a size distribution based on aerodynamic diameter is important to understand aerosol characteristics, lots of researcher had been developed experimental equations which can convert optical diameter into aerodynamic diameter. However, previous studies have conducted repeated experiments on particles having a single diameter. In this study, an experimental method of converting optical diameter into aerodynamic diameter through a single experiment was presented. The collection efficiencies of an axial cyclone were measured using APS and OPC at the same time, and the correlation equation between aerodynamic diameter and optical diameter was driven through a theoretical model. Using the proposed method, the size distribution of NaCl particles measured by OPC showed a high correlation with the size distribution obtained by APS (0.93 of R-squared value). In the tests conducted on ISO A1, A2, and A4 test particles, the converted OPC size distribution tended to be similar to the APS size distribution, and for each of test particles (ISO A1, A2, and A4), the R-squared values for the APS particle size distribution were 0.75, 0.86, and 0.89, respectively.

• 디지털융복합연구
• /
• 제11권6호
• /
• pp.269-273
• /
• 2013

치과 진료시 파노라마 장치를 이용한 검사에서 유리선량계를 사용하여 피검자의 피폭선량을 측정하였다. 특히 방사선에 민감한 수정체의 피폭선량을 줄이기 위하여 자체 제작한 Pb밴딩의 크기에 따라 수정체 피폭선량을 측정한 결과 Pb밴딩의 크기에 따라서 수정체의 피폭선량이 다르다는 것을 확인할 수 있었다. Pb밴딩의 크기가 $3{\times}20{\times}0.2cm$에서는 정상치보다 피폭선량이 증가하는 경향을 보였으며 $5{\times}20{\times}0.2cm$ 이상의 크기에서는 피폭선량이 감소하는 결과를 보였다. 또한 획득되어진 영상 $7{\times}20{\times}0.2cm$ 크기에서 진단에 부적합한 영상으로 판정되었다. 그러므로 피폭선량을 최소화하고 효과적인 파노라마 검사를 수행하기 위해서는 Pb밴딩 $5{\times}20{\times}0.2cm$이상 $6{\times}20{\times}0.2cm$이하 크기를 사용하여 검사에 활용하면 피폭선량이 감소될 것으로 기대한다.

• 한국분무공학회지
• /
• 제11권2호
• /
• pp.59-68
• /
• 2006

Experimental results of the metal powder production with internal mixing, internal impinging and the atomizer coupled with substrate design are presented in this paper. In a test with internal mixing atomizer, mean powder size was decreased from $37{\mu}m\;to\;23{\mu}m$ for Pb65Sn35 alloy as the gas-to-melt mass ratio was increased from 0.04 to 0.17. The particle size further reduces to $16.01{\mu}m$ as the orifice area is increased to $24mm^2$. The micrograph of the metal powder indicates that very fine and spherical metal powder has been produced by this process. In a test program using the internal impinging atomizers, the mean particle size of the metal powder was decreased from $22{\mu}m\;to\;12{\mu}m$ as the gas-to-melt-mass ratio increased from 0.05 to 0.22. The test results of an atomizer coupled with a substrate indicates that the deposition rate of the molten spray on the substrate is controlled by the diameter of the substrate, the height of the substrate ring and the distance of the substrate from the outlet of the atomizer. This in rum determines the powder production rate of the spraying processes. Experimental results indicate that the deposition rate of the spray forming material decreases as the distance between the substrate and the atomizer increases. For example, the deposition rate decreases from 48% to 19% as the substrate is placed at a distance from 20cm to 40cm. On the other hand, the metal powder production rate and its particle size increases as the subsrate is placed far away from the atomizer. The production of metal powder with mean particle size as low as $3.13{\mu}m$ has been achieved, a level which is not achievable by the conventional gas atomization processes.