• 한국세라믹학회지
• /
• 제45권11호
• /
• pp.750-754
• /
• 2008

The artificial aggregates with dense surface layer (shell) was fabricated and the dependence of water emission rate upon the shell structures was studied. The EAF dust containing many flux components and waste white clay with ignition loss of above 48% were used as for liquid phase and gas forming agents during a sintering process respectively. In addition, the shell structure was modified with various processes and the modification effect on water emission rate was analyzed. The pores under $10{\mu}m$ were found in the sintered artificial light aggregates and disappeared by incorporating to a bigger pore during re-sintering. The water emission rate in an initial step depended on a void content of aggregates filled in a bottle rather than a shell structure. But, after 7 days where the water emission of the aggregate with a shell is above 40%, the shell of aggregates suppressed the water emission. The core of aggregates was exposed and most shell was lost when crushed to smaller size so, the ability for suppressing water emission of the crushed aggregates decreased. The activation energy for the water emission was $3.46{\pm}0.25{\times}10^{-1}$J/mol for the most specimens showing that the activation energy is irrelevant to the pore size distribution and shell structure.

• 한국안전학회지
• /
• 제27권6호
• /
• pp.93-98
• /
• 2012

In order to capture the fast crack propagation in an unmanipulated concrete fracture test, we employed mechanoluminascent(ML) material, which emits visible light when stressed, as a crack visualization tool. Three-point bending fracture test setup, a paint type ML material and a high speed camera were used to capture the images of fast moving cracks. The maximum size of coarse aggregates of concrete was used as an experimental parameter. The crack images, loading, and crack mouth opening displacement were successfully recorded as a function of time elapsed. From the test results, several interesting cracking behavior in the unmanipulated fracture test was observed in such that (1) the crack moves fast while the load is slowly decreased after the maximum loading, and (2) the crack in concrete with larger coarse aggregates moves faster than the others.

• The Journal of Asian Finance, Economics and Business
• /
• 제8권3호
• /
• pp.763-769
• /
• 2021

The relationship between government size and unemployment is an important topic of study in economics. Large public expenditure has been blamed for causing higher unemployment contrary to the belief that it would help in reducing unemployment. More research on the topic, however, needs to be done as the available literature has been based largely on data from developed countries. The present paper examines the existence of the relationship in states of India by using panel data analysis. For more comprehensive study, public expenditure is divided into development, non-development, and aggregate expenditures, while the types of unemployment under consideration are usual status and current weekly status. Indeed, it has been observed that development and non-development expenditures increase both the types of unemployment though the impact of the latter is higher. The findings are important as it implies that a cut in expenditure can be an important fiscal tool to fight unemployment. It was further observed that unemployment was higher among states with a more educated population, which also suggests a revisiting of the education policy in the country. States ruled by left parties have higher unemployment rate. Higher income states as well as states with higher growth rate tend to have lower unemployment rate.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1995년도 가을 학술발표회 논문집
• /
• pp.246-251
• /
• 1995

To reduce the size of structural members high strength concrete has recently been utilized for structrue such as ultra-high-rise buildings and prestressed concrete bridges in North America. and its compressive strength has gone up to 1300kgf/$\textrm{cm}^2$. In Japan, research on high-strength concrete has been undertaken on a large scale by the national enterprise so-called New RC Project, and this project purposed to develop the design compressive sstength of 1200kgf/$\textrm{cm}^2$. Considering these circumstance. the aim of this aim of this experimental study is to develop ultra-high-strength concrete with compressive stength over 2300kgf/$\textrm{cm}^2$ with domestic current materials. There are so many factors which influence on manufacturing of ultrahigh-strength concrete. The experimental factors selected in this study are mixing methods, curing methods, water-binder ratio, maximum size of coarse aggregate, and the replacement proportion of cement by silica fume. The results of this expermental study show that it is possible to develop the ultra-high-strength concrete with compressive strength over 2300kgf/$\textrm{cm}^2$.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1995년도 가을 학술발표회 논문집
• /
• pp.252-255
• /
• 1995

To reduce the size of structural members, high strength concrete has recently been utilized for structure such as ultra-high-rise buildings and prestressed concrete bridges in North America. And its compressive strength has gone up to 1300kgf/$\textrm{cm}^2$. In Japan. research on high-strength concrete has been undertaken on a large scale by the national enterprise so-called New RC Project, and this Project purposed to develop the design compressive strength of 1200kgf/$\textrm{cm}^2$. Considering these circumstance. the aim of this experimental study is to develop ultra-high-strength concrete with compressive strenght over 2300kgf/$\textrm{cm}^2$ with domestic current materials. There are so many factors which influence the manufacturing of ultra-high-strength concrete. The experimental factors selected in this study are mixing methods. curing methods. water-binder ratio, maximum size of coarse aggregate, and the replacement proportion of cement by silica fume. The results of this expermental study show that it is possible to develop the ultra-high-stength concrete with compressive strength over 2300kgf/$\textrm{cm}^2$.

• 대한토목학회논문집
• /
• 제31권2A호
• /
• pp.129-136
• /
• 2011

최근 대기오염 물질을 제거하기 위하여 $TiO_2$ 등의 광촉매 재료를 사용한 기능성콘크리트에 대한 연구가 활발히 이루어지고 있다. 이들 연구에서 $TiO_2$의 흡착은 콘크리트에 직접 혼합하거나, 현탁액을 표면에 직접 도포하는 방법을 사용하고 있다. 이 중 콘크리트에 $TiO_2$를 직접 혼합하는 방법은 $TiO_2$의 사용량에 비하여 효능이 떨어져 표면에 직접 도포하는 방법이 많이 이용된다. $TiO_2$의 표면도포는 광촉매의 활성화와 접착성 증대를 위하여 $400^{\circ}C$ 이상의 고온 열처리를 실시하게 되며, 이는 콘크리트 수화생성물의 탈수 수축으로 내부균열을 발생시키는 원인이 되기도 한다. 이에 이 연구에서는 $TiO_2$의 저온도포가 가능한 Sol-gel법으로 $TiO_2$를 제조하였으며 펄라이트 사용 경량골재콘크리트에 저온 고정화하여 $TiO_2$ 도포 성능을 평가하였다. 또한 펄라이트 입경을 2.5~5.0 mm와 5.0 mm이상으로 구분하여 펄라이트 입경, $TiO_2$ 혼입방법과 혼입률 및 시간경과에 따른 $CH_3CHO$ 제거 특성을 검토하였다. 실험결과, Sol-gel법으로 제조한 $TiO_2$를 $120^{\circ}C$에서 저온 도포할 때 XRF 정량분석에서 $TiO_2$ 38%, $SiO_2$ 29%, CaO 18% 순으로 나타나 $TiO_2$ 도포율은 높게 나타났다. 또한 펄라이트 입경 2.5~5.0 mm에서 $TiO_2$를 저온도포한 경량골재콘크리트의 $CH_3CHO$ 제거 특성은 Sol-gel법으로 제조된 $TiO_2$를 7% 표면 도포하였을 경우 94%로 나타나 10%를 혼입할 때 72%에 비해 약 20%정도 높게 나타났다. 또한 펄라이트 입경 5.0 mm이상에서 $TiO_2$를 10%로 치환하여 혼합하였을 경우 $CH_3CHO$ 제거율은 69%로 펄라이트 입경 2.5~5.0 mm에 대한 72%와 비슷하게 나타나 펄라이트 입경이 $CH_3CHO$ 제거율에 미치는 영향은 크지 않았다. 시간 경과에 따른 $CH_3CHO$ 제거 특성은 전 시험편의 10시간 평균 제거율이 20시간 전체 제거율의 84% 수준으로 나타나 반응 초기에 제거율이 높은 것으로 나타났다.

• 한국토양비료학회지
• /
• 제33권2호
• /
• pp.61-70
• /
• 2000

강원도 평창군 도암면에 소재하는 농촌진흥청 고령지 농업시험장에 포장을 설치하여 옥수수와 감자 작부 체계 하에 토양의 토양피복인자 (SC), 내수성 토양 입단함량, 내풍식성 입단함량과 풍식성 인자 (I)를 조사하였다. 토양 침식인자 값 (K)은 실험 처리구의 상부가 하부보다 높았다. SC 값은 식물 잔재물의 양에 따라 다른 값을 보였으며, 0.01~0.84 이었다. 수확 후 식물 잔재물의 지면 피복도 (%)에 따른 SC 부요소 값은 옥수수 재배구에서 0.4~0.8 이며, 감자 재배구에서는 0.4~0.5이었다. 이는 감자 수확 시 잔재물이 옥수수 수확 시 잔재물에 비해 비교적 많이 남기 때문이었다. 시험 포지 토양의 입단함량 범위는 49.7~79.8%이었다 옥수수 재배구 중 화학비료 및 유기질 비료를 시용하고 등고선 경운 방법에 의한 처리구가 입단함량이 가장 높았다. 옥수수 수확 후의 피복도 (%)와 입단 함량 (%)의 관계는 회귀관계식이 성립되며, $r^2$는 0.96 이었다. 옥수수 재배구의 평균 입단함량이 감자 재배 포장의 평균 입단함량보다 다소 낮았다. 시험 포지 토양의 내풍식성 입단함량의 범위는 26.38~56.45% 이었다. 옥수수 재배구의 토양 입단 함량 (%)은 수확 후 잔재물과 유의성이 있었다. 옥수수 재배구 중 화학비료 및 유기질 비료를 시용하고 등고선 경운법에 의한 처리구의 경우 내풍식성 입단 함량은 26.42%로 풍식성 인자를 계산하면 $183Mgha^{-1}$이고, 토양의 휴조도 인자 (K')는 0.52이었다. 이에 따르면, 년 중 기상상태가 풍식이 일어날 수 있는 건조 상태일 경우 최대 풍식 가능량은 1일 $0.5Mgha^{-1}$에 해당하는 양이었다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제18권1호
• /
• pp.8-12
• /
• 2005

Response in a modified reciprocal recurrent selection scheme for egg production was evaluated considering variable family sizes and genetic correlation between purebred and crossbred half sisters. The criteria of selection of purebred breeders included pullet's own performance, purebred full and half sisters and crossbred half sister's performance. Heritability of egg production of crossbreds (aggregate genotype) and purebred's was assumed to be 0.2 and genetic correlation between purebred and crossbred half sisters ($r_{pc}$) as 0.1, 0.2, 0.3, 0.4, 0.5, 1.0, -0.1, -0.2, -0.3, -0.4, -0.5 and -1.0. Number of dams per sire to produce purebred and crossbred progenies assumed to be 5, 6, 7, 8, while number of purebred female progeny ($N_p$) and crossbred progeny ($N_c$) per dam were considered to be 3, 4, 5 and 6 in each case. Considering phenotypic variance as unity, selection indices were constructed for different combinations of dams and progeny for each value of $r_{pc}$. Following selection index theory, response in crossbred and purebred for egg production was computed. Results indicated that response in crossbreds depended mainly on crossbred family size and also on magnitude of$r_{pc}$ irrespective of its direction, and response was greater with large crossbred family size than the purebred families. Correlated response in purebreds depends both on magnitude and direction of $r_{pc}$ and was expected to be greater with large purebred family size only. Inclusion of purebred information increased the accuracy of selection for crossbred response for higher magnitude of$r_{pc}$ irrespective of its direction. Present results indicate that desirable response in both crossbred and purebred performance is a function of $r_{pc}$ and family sizes. The ratio of crossbred and purebred family sizes can be optimized depending on the objective of improving the performance of crossbreds and/or of purebreds.

• 대한기계학회논문집B
• /
• 제23권11호
• /
• pp.1379-1389
• /
• 1999

A new technique for control of size and shape of flame-made particles is Introduced. The characteristic sintering time can be controlled Independently of collision time by heating the particles with irradiation of laser because the sintering time strongly depends on temperature. A coflow oxy-hydrogen diffusion flame burner was used for $SiCl_4$ conversion to silica particle. Nanometer sized aggregates irradiated by a high power CW $CO_2$ laser beam were rapidly heated up to high temperatures and then were sintered to approach volume-equivalent spheres. The sphere collides much slower than the aggregate, which results in reduction of sizes of particles maintaining spherical shape. Light scattering of Ar ion laser and TEM observation using a local sampling device were used to confirm the above effects. When the $CO_2$ laser was irradiated at low position from the burner surface, particle generation due to gas absorption of laser beam occurred and thus scattering intensity increased with $CO_2$ laser power. At high irradiation position, scattering intensity decreased with $CO_2$ laser power and TEM image showed a clear mark of evaporation and recondensation of particles for high $CO_2$ laser power. When the laser was irradiated between the above two positions where small aggregates exist, average size of spherical particles obviously decreased to 58% of those without $CO_2$ laser irradiation with the spherical shape. Even for increased carrier gas flow rate by a factor of three, TEM photograph also revealed considerable reduction of particle size.

• 한국전산유체공학회지
• /
• 제20권4호
• /
• pp.81-92
• /
• 2015

Construction waste mainly consists of concrete aggregates of various size. Improper handling of concrete waste would be a major environmental problem whereas its recycling would be both economically useful and environmentally friendly. Bigger concrete aggregates are crushed and converted to medium and fine particles to make them recyclable. An apparatus to separate the concrete aggregates by their size is thus needed for their effective recycling. In this work, segregation of concrete particles in air flows from a newly designed rotary separator having three stages of blades is simulated using a commercial software, ANSYS-CFX. Both 2-D and 3-D models with 360, 240 and 180 blades in each stage are considered. Fundamental mechanism of separation of particles(pase) and the effect of design parameters such as particle size, rotor speed, air flow rate etc. on the performance of the separator are investigated. Critical size of particles that can be separated by the developed separator is also presented in this work. Simulation results are overall in good agreement with data predicted from the theoretical model previously reported in the companion paper.