• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.10a
• /
• pp.230-239
• /
• 2006

The depth, width and alignment of fairway that are main port water facilities should be designed considering the various elements including particulars of design ships, weather and sea conditions around fairway and method of ship-handling. However not only the existing Japanese design standard for fairway and also those of other countries do not take into consideration of such kind of elements and no design standard is made by quantitative analysis. In this circumstance the new design standard (Approach Channels, A Guide for Design) depending on classified various elements and quantitative analysis was proposed in 1997 by PIANC and IAPH. But it was proved that calculated values according to this standard were unfounded and had some problems to output the discontinuous value by small difference of calculation condition because the each value fur each element was simply added. And also it is hard to apply this standard to the design of port water facilities in Japan because this [A Guide for Design] is the design standard for long channels in European port. The proposal of more reasonable Japanese standard will be expected by applying the study result of naval architecture and navigation and by the cooperation of ship operators to use fairway, naval architects to built ships and civil engineers to dredge fairway. The concept of a fairway in 'Design standard fur fairway in next generation' is defined as passage for approach channel) and traffic lane designated by light buoys as navigable water for safe navigation. In 'Design standard for fairway in next generation' depth, width and alignment are picked up among many design elements of a fairway. Design method for those elements is shown based on design ships and navigational environments. This standard shows the method of design for each dimension depending on characteristic on design ship and weather and sea condition. On the other hand, in case of existing fairway, it is possible to decide the size of ship and navigation criteria by opposite analysis.

• Journal of Veterinary Clinics
• /
• v.30 no.2
• /
• pp.127-130
• /
• 2013

A 13-year-old, 4.2 kg female poodle was referred for failure of first bilateral mandibular surgery at a local animal hospital after pathologic fracture. Surgery was performed with 2.0-mm miniplates/screws and porcine cancellous bone grafts. In addition, because of the large size of the right segmental defect, a barrier absorbable membrane was employed for guide bone regeneration on right mandible. After surgery, follow-ups performed at 1 day, 1, 4, 8, and 12 weeks; there were no signs of dental malocclusion, nonunion or soft tissue infection. However, a 1-year long-term follow-up showed nonunion in the left mandibular fracture site for which a collagen membrane had not been used. It is considered that use of porcine bone graft with barrier absorbable membrane may be effective for the repair of mandibular nonunion in a geriatric dog.

• Journal of the Korean housing association
• /
• v.18 no.3
• /
• pp.51-61
• /
• 2007

This study is aimed to provide a guide for PC use space in apartment. To achieve this, a design about PC use space which was considered adequate location, area, form was suggested. As methods of the study, survey research method and case study. The survey was taken by five hundred-eighty-nine people who used PCs in apartment from May 2005 to July 2005 in JeJu Special Self-governing Province for an analysis of data. The results of the survey were showed PC use space situation and furnitures layout patterns. The case was classified by unit plans of size, and it showed design example of PC use space. In types of $61{\sim}69$ square meters ($m^2$), PC use space was located in dead-space in the residence with minimum scale, because of $61{\sim}69$ square meters types are smaller than the other types. In types $100{\sim}129$ square meters, PC use space which was divided with a partition panel was located in the livingroom expanding the room space to the balcony. In types of 130 square meters, PC use space was located in the room of sons or daughters which was arranged with other furniture. The adequate area of PC use space is $1.4{\sim}2.2$ square meters, and it should take into account furniture size and human active sphere. And PC use space of form should consider traffic line, personal space and privacy. Besides it is required of ergonomic design in chair, table in its scale. And it is necessary development of systematic furniture for PC use space.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2006.11a
• /
• pp.86-91
• /
• 2006

This study is aimed to provide a guide for PC use space in apartment. To achieve this, a design about PC use space which was considered adequate location, area, form was suggested. As methods of the study, survey research method and case study. The survey was taken by five hundred-eighty-nine people who used PCs in apartment from May 2005 to July 2005 in Je-Ju province for an analysis of data. The results of the survey were showed PC use space situation and furnitures layout patterns. The case was classified by unit plans of size, and it showed design example of PC use space. In case of the 20s pyeong(about 3.30 square meters) type, PC use space was located in dead-space in the residence with minimum scale, because of 20s pyeong types are smaller than the other types. In case of the 30s pyeong type, PC use space which was divided with a partition panel was located in the livingroom expanding the room space to the balcony. In case of the 40s pyeong type, PC use space was located in the room of sons or daughters which was arranged with other furniture. The adequate area of PC use space is 1.4$^{\sim}$2.2 square meters, and it should take into account furniture size and human active sphere. And PC use space of form should consider traffic line, personal space and privacy. Besides it is required of ergonomic design in chair, table in its scale. And it is necessary development of systematic furniture for PC use space.

• Korean Institute of Interior Design Journal
• /
• no.25
• /
• pp.142-148
• /
• 2000

The purpose of this study is to provide a practical guide for the actual conditions and the preference of student housing in a regional university. The data are collected through questionnaire surveys from the students of a regional university. 265 samples are collected, and are analyzed by using SPSS-PC. The results are as follows: 1) The actual conditions of student housing Most residents of student housing(76.3%) come from the Capital region. Most of student housing are located at 30 minute distance from the school. Most of house style are Offistel as one room style. Most of housing size are within 10 minute distance from the school. Most of house style are Offistel as one room style. Most of housing size are within 10py, and two people reside in one unit. The average hours of staying at the student housing are over 10 hours. The most inconvenient factor is the lack of soundproofing in the current student housing. 2) The preference of student housing The most preferred location is in the walking distance from the school, and the apartment is the most preferred housing style. The most preferred installation of inside is internet connection. When choosing student housing, students prefer the distance from the school as the most important factor. Most female students reside with a roommate within 10 py of housing size, cook for themselves, and consider rent and maintenance fee as the decision factors in choosing housing. The most preferred style of house is apartment, and they prefer to install basic furniture and kitchen system inside of housing. As students go up to higher grade, they prefer the apartment, and prefer to cook for themselves. More fresh men reside with a roommate compared to other grades. They prefer Offistel with meals service at a walking distance from the school.

• Fire Science and Engineering
• /
• v.33 no.5
• /
• pp.86-93
• /
• 2019

Previous studies related to evacuation guidance systems are focused on the system construction, and research on manual of the standard evacuation map is insufficient. Therefore, this research is a basic study to establish the standard evacuation map, and analyzed the decision-making time according to the type and size for each component of the evacuation map. Experimental elements were derived through the review of previous studies and legal regulations. After that, decision-making time was analyzed according to the type and size of the component display method. An experiment was conducted to analyze the decision-making time according to the type and size of the component display method. Afterwards, through the statistical test, the evacuation map guidelines for smartphones were proposed.

• Journal of Navigation and Port Research
• /
• v.28 no.8
• /
• pp.687-697
• /
• 2004

This paper is aimed to guide ocean-going companies to reasonable decisions and to increase the competitiveness of Korean shipping industry by clarifying the determinants of political costs of ocean-going companies, which only depend for the enormous amount of money to introduce the operating fixed assets, or the vessels, upon the supporting policy from the government or the loan from the related financial institutions. As independent variables of the political costs, 5 elements were settled such as company size(sales, total assets and market share), debit ratio, capital concentration ratio, profitability(operating profit) and marine risk(sales fluctuation). To verify the relations and the effect level between dependent variables and political costs, the Multiple Regression Analysis Model was applied The result of the analysis shows significantly positive relations between size variables and political cost of shipping industry. Moreover, debt ratio and profitability were proved significant related with political costs of shipping industry.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.3
• /
• pp.51-58
• /
• 2008

Development of a new design guide which is based on empirical-mechanistic concept for pavement design is in action. It is called AASHTO 2002 Design Guide in USA and the KPRP(Korean Pavement Research Project) in Korea. The material characteristic of hot mix asphalt is a key role in the design guide. Therefore it is urgent to get a proper materials database, especially the dynamic modulus of hot mix asphalt. In this research, dynamic modulus test, which is based on aged asphalt binder, has been carried out and proposed the predicted equation of dynamic modulus. Nine different hot mix asphalt with three different asphalt binder have been used for the dynamic modulus test. Short-term aging, which is covers the time for the production of asphalt plant, transportation, lay-down, and compaction, can be simulated at $135^{\circ}C$ with 2 hour curing. Long-term aging has been carried out for a performance period of asphalt pavement. The dynamic modulus of asphalt pavement increases with aging time. As the nominal aggregate size increases, the change of dynamic modulus is not big.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.2
• /
• pp.326-333
• /
• 2003

The appropriate treatment for eruption guide of impacted teeth necessitates the formulation of a comprehensive treatment plan, which is dependent upon a number of factors such as the condition of the deciduous teeth, dental and skeletal relationship, dental age of the patient, willingness of the patient to undergo extensive dental treatment and financial considerations. If the etiology of the eruption disturbance has been identified, the elimination of the causes and various procedures can be used for eruption guide. Particularly the transplantation is a valuable alternative to extraction of impacted teeth, where surgical exposure and subsequent orthodontic realignment are difficult or impossible. This report present three cases of autotransplantation of impacted maxillary canine. As the result in these cases, atraumatic removal of donor tooth during operation is prerequisite to an optimal clinical result. Due to a high possibility of pulp necrosis, endodontic treatment of fully developed transplanted teeth should be undertaken. In complex case, autotransplantation can save time and less expensive than orthodontic forced eruption. Recipient socket should be prepared to a size that is slightly larger than the root of the donor tooth, and can be prepared with open or close procedure depends on root size of donor tooth and buccolingual width at transplantion site.

• Korean Chemical Engineering Research
• /
• v.62 no.3
• /
• pp.214-224
• /
• 2024

Valves play an essential role in a chemical plant such as regulating fluid flow and pressure. Therefore, optimal selection of the valve size and type is essential task. Valve size and type have been selected based on theoretical formulas about calculating valve sizing coefficient (Cv). However, this approach has limitations such as requiring expert knowledge and consuming substantial time and costs. Herein, this study developed a model for predicting valve sizes and types using machine learning. We developed models using four algorithms: ANN, Random Forest, XGBoost, and Catboost and model performances were evaluated using NRMSE & R² score for size prediction and F1 score for type prediction. Additionally, a case study was conducted to explore the impact of phases on valve selection, using four datasets: total fluids, liquids, gases, and steam. As a result of the study, for valve size prediction, total fluid, liquid, and gas dataset demonstrated the best performance with Catboost (Based on R², total: 0.99216, liquid: 0.98602, gas: 0.99300. Based on NRMSE, total: 0.04072, liquid: 0.04886, gas: 0.03619) and steam dataset showed the best performance with RandomForest (R²: 0.99028, NRMSE: 0.03493). For valve type prediction, Catboost outperformed all datasets with the highest F1 scores (total: 0.95766, liquids: 0.96264, gases: 0.95770, steam: 1.0000). In Engineering Procurement Construction industry, the proposed fluid-specific machine learning-based model is expected to guide the selection of suitable valves based on given process conditions and facilitate faster decision-making.