• Korean Journal of Environment and Ecology
• /
• v.34 no.2
• /
• pp.170-178
• /
• 2020

There are few landscape ecological analyses of Khingan fir (Abies nephrolepis) and other habitats of the sub-alpine zone in South Korea. In this study, we tried to quantitatively interpret and assess the habitat characteristics by analyzing 15 landscape indices according to the differences in tree layer coverage, in the Khingan fir habitat growing naturally in the sub-alpine zone of Seoraksan National Park. It was difficult to identify the tendency of landscape ecology to increase and decrease the tree layer coverage in the study site, which was the entire Khingan fir habitat in Seoraksan National Park. However, the Khingan fir habitat was found to be generally low in coverage, and population density as the tree layer coverage of less than 50 percent accounts for 85 percent of the total habitat. Moreover, the Khingan fir habitat in the 10 to 50 percent range was fragmented into a total of 286 patches, making it relatively less connected to the habitat. The total edge length and edge density, which could determine the edge effect of the main part according to the physical form, were the highest in the habitat of 26 to 50 percent coverage, indicating a relatively high impact from outside than habitats of other coverages. The shape with the tree layer coverage of between 10 and 50 percent was more complex even with patches of the same size, and it is believed that these characteristics make it more susceptible to habitat fragmentation and external confounding. We expect that the results of this study can be useful for time series analysis of spatial expansion or reduction of the Khingan fir habitat in Seoraksan National Park and provide the reference data for the morphological change and movement of patches and the connectivity and break-off between forests.

• Clean Technology
• /
• v.24 no.3
• /
• pp.198-205
• /
• 2018

This study investigated the influence of catalyst preparation on the activity of $Co-CeO_2$ catalyst for $N_2O$ decomposition. $Co-CeO_2$ catalysts were synthesized by co-precipitation and incipient wetness impregnation. In order to estimate the performance of the as prepared catalysts, direct catalytic $N_2O$ decomposition test was carried out under $250{\sim}375^{\circ}C$. As a result, the catalyst prepared by co-precipitation (CoCe-CP) showed an enhanced performance on $N_2O$ decomposition reaction even in the presence of $O_2$ and/or $H_2O$, whereas the impregnation catalyst (CoCe-IM) did not. In order to investigate the difference in catalytic activity, characterization such as XRD, BET, TEM, $H_2-TPR$, $O_2-TPD$, and XPS was conducted. It is confirmed that the particle size and specific surface area were changed depending on the catalyst preparation method and the synthesis process influenced the physical properties of the catalysts. In addition, the improvement in the activity of the catalyst prepared by co-precipitation is due to the enhanced reduction from $Co^{3+}$ to $Co^{2+}$ and the improved oxygen desorption rate. However, it has been confirmed that the surface electron state and binding energy, which are related to $N_2O$ decomposition, do not change depending on the preparation method.

• Journal of Korean Ophthalmic Optics Society
• /
• v.20 no.2
• /
• pp.237-246
• /
• 2015

Purpose: The present study was conducted to reveal the correlation of structural denaturation and decrease of enzyme activity when the antioxidative enzymes, superoxide dismutase (SOD) and catalase (CAT) were repeatedly exposed to UV-B, and further investigate whether the denaturation and inactivation of those enzymes can be effectively blocked by using UV-inhibitory RGP lens. Methods: Each enzyme solution was prepared from the standardized SOD and CAT, and repeatedly exposed to UV-B of 312 nm for 30 minutes, 1 hour and 2 hours a day over 1, 2, 3, 4 and 5 days. Structural denaturation of SOD and CAT induced by repeat UV-B irradiation was confirmed by the electrophoretic analysis, and their enzyme activity was determined by the colorimetric assay using the proper assay kit. At that time, the change in structure and activity of the antioxidant enzymes directly exposed to UV-B was compared to the case that UV-B was blocked by UV-inhibitory RGP lens. Results: SOD exposed repeatedly to UV-B showed the polymerization pattern in the electrophoretic analysis when it repeatedly exposed for 30 min a day, however, the change of its activity was less than 10%. On the other hand, CAT repeatedly exposed to UV-B reduced size and density of the electrophoretic band which indicated a structure denaturation, and its activity was significantly decreased. In the case that the repeat exposure time was longer, CAT activity was completely lost even though some enzyme band occurred in the electrphoretic analysis. In addition, the degeneration of CAT due to UV-B irradiation was inhibited to some extent by using RGP lens with a UV-B blocking of 63.7%, however, it was not completely inhibited. Conclusions: From these results, it was revealed that the structural denaturation of antioxidative enzymes was not perfectly correlated with the reduction in enzyme activity according to the type of enzyme. It is recommended to minimize the exposure time to UV when wearing contact lens, or wear the contact lenses having UV blocking rate of the FDA Class I blocker or the sunglasses having equivalent UV-blocking rate for reducing the damage of antioxidative enzymes induced by UV.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.2
• /
• pp.165-174
• /
• 2010

The numerical modeling of a coal gasification reaction occurring in an entrained flow coal gasifier is presented in this study. The purposes of this study are to develop a reliable evaluation method of coal gasifier not only for the basic design but also further system operation optimization using a CFD(Computational Fluid Dynamics) method. The coal gasification reaction consists of a series of reaction processes such as water evaporation, coal devolatilization, heterogeneous char reactions, and coal-off gaseous reaction in two-phase, turbulent and radiation participating media. Both numerical and experimental studies are made for the 1.0 ton/day entrained flow coal gasifier installed in the Korea Institute of Energy Research (KIER). The comprehensive computer program in this study is made basically using commercial CFD program by implementing several subroutines necessary for gasification process, which include Eddy-Breakup model together with the harmonic mean approach for turbulent reaction. Further Lagrangian approach in particle trajectory is adopted with the consideration of turbulent effect caused by the non-linearity of drag force, etc. The program developed is successfully evaluated against experimental data such as profiles of temperature and gaseous species concentration together with the cold gas efficiency. Further intensive investigation has been made in terms of the size distribution of pulverized coal particle, the slurry concentration, and the design parameters of gasifier. These parameters considered in this study are compared and evaluated each other through the calculated syngas production rate and cold gas efficiency, appearing to directly affect gasification performance. Considering the complexity of entrained coal gasification, even if the results of this study looks physically reasonable and consistent in parametric study, more efforts of elaborating modeling together with the systematic evaluation against experimental data are necessary for the development of an reliable design tool using CFD method.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.17 no.5
• /
• pp.361-367
• /
• 1984

In previous paper(Lee et al., 1984), preparation formula and processing conditions of the fish meat (mackerel) paste using dielectric heating were described, that included the proper shape and size of product and the conditions of dielectric heating, hot air dehydration, and heating with electric heater to yield the minimum expansion and case hardening during heating and to controll the final rater activity of 0.86 to 0.83 accompanying with a complete reduction of viable cells and good texture. In present study, changes in VBN, pH, total plate count, water activity, texture, the loss of available lysine, color indexes, TBA value, and the content of TI were determined to assess the quality stability and shelf-life of the product during the storage for 35 days at $5^{\circ}C\;and\;25^{\circ}C$, respectively. And the effect of vacuum sealing and hot water treatment before storage on the storage stability of product was also mentioned. As the product was vacuum packed in K-flex film bag, heat treated in boiling water for 6 minutes, and stored, water activity was maintained 0.86 to 0.84 for 35 days regardless of storage temperature, and the increase of total plate count was negligible in case of $5^{\circ}C$ storage while tended to gain slightly after 25 days at $25^{\circ}C$ storage. Changes in VBN was also minimum with an increase of 1.5 mg/100g at $5^{\circ}C$ and 7.0mg/100g at $25^{\circ}C$, but in case of unpacked sample, it was 24.5mg/100g at $5^{\circ}C$ and 42.4 mg/100g at $25^{\circ}C$ even after 7 days. In textural property hardness tended to increase after 28 days and folding test score was down to A or B from AA grade. The loss of available lysine was $7.5\%\;at\;5^{\circ}C$ and $17.0\%\;at\;25^{\circ}C$ but brown color was not deeply developed as the color index score indicated. TBA value was not increased at $5^{\circ}C$ while it tended to increase rapidly after 30 days at $25^{\circ}C$. Changes in TI content was not obvious except that it showed a tendency of increase at the end of storage as well as in the change of lysine and TBA value. It is concluded from the results that the quality of the product, pasteurized and water activity controlled by dielectric heating, and vacuum packed in K-flex film would be stable for more than 35 days at $5^{\circ}C$ and at least 25 days even at room temperature.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.18 no.1
• /
• pp.52-56
• /
• 1985

For the fundamental studies of radiation breeding in edible marine algae, the biological effects on conchospores of Porphyra species by gamma-irradiation were examined. Two varieties, Keun-cham-gim (Porphyra tenera Kjell. form tamatsuensis Miura) and Saga No.5, were chosen for this study, and their conchospores after r-irradiation($5.0{\sim}20.0$ KR) were cultured for 50 days. The results obtained were summarized as follows. 1. Gamma-irradiation in less than the dose of 20KR did not affect germination of conchospores, and almost all spores grew into two cells germ in 24 hours after irradiation, but withering germs were gradually increased in number according to higher exposure within 5 days old culture. 2. High irradiation caused the induction of giant cells, abnormal useless growth of hold-fast, lumpish thalli and callus-like lumpy tissues. 3. The liberation of neutral spores from young germs and carpospores from mature thalli were observed on the frond exposed at $10{\sim}20$ KR irradiation. All spores were normal in division and its size. 4. The best irradiation effect on growth of Keun-cham-gim was observed at 10 KR dose, whose growth-rates were $140\%$ in wet weight and $108\%$ in mean frond area, but only $48\%$ was recorded in wet weight at 20 KR exposure. Saga No.5 were in contrast with Keun-cham-gim, and their most growth-rate was $400\%$ in wet weight ($258\%$ in frond area) at 10 KR irradiation and the worst was $20\%$ at the dose of 20 KR. 5. The withering phenomenon to death by treatment of gamma-ray presented substantial difference between two varieties. Survival rate compared with control in Keun-cham-gim was $70.7\%$ at 20 KR, but that in Saga No.5 recorded $47.0\%$ at same dose. 6. Synthesizing the results of high and low r-irradiation, it was suggested tat high r-irradiation in more than 5.0 KR inhibited conspicuously the growth of germs derived from conchospores, and about half of them withered at 15.0 KR dose or more.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.8
• /
• pp.965-974
• /
• 2007

This study was performed to investigate the effects of vegetable sprout powder on serum and adipose tissue lipid metabolism in rats fed high-fat diet for 4 weeks for induction hyperlipidemic model rat. Weight-matched male Sprague-Dawley rats were assigned to five groups according to dietary fat level (10% or 20% of diet wt.) and mixture of vegetable sprout powder levels (5% or 10% 10% or 20% of diet wt.). Vegetable sprout powder was the mixture of same amounts of dried barley, broccoli, rapeseed, alfalfa, radish, mustard, buckwheat and brussels sprouts. Experimental groups were normal fat diet with 5% cellulose (NF-C), high fat diet without fiber (HF-N), high fat diet with 5% cellulose (HF-C), HF-C diet with 5% vegetable sprout powder (HF-CSL), and HF-C diet with 10% vegetable sprout powder (HF-CSH). The body weight of HF-N group increased 16% compared with the NF-C group, while it was decreased by 15% and 22% for HF-CSL group and HF-CSH group, respectively. Fat mass and fat cell size of adipose tissue were lower in HF-CSL group and HF-CSH group compared with HF-C group, and lower in HF-CSH group compared with HF-CSL group. Serum triglyceride, total cholesterol and LDL-cholesterol contents were markedly decreased by vegetable sprout powder containing diet, while the serum HDL-cholesterol and phospholipid contents were higher in vegetable sprout powder containing diet in a dose-dependent manner. Leptin and insulin levels in serum showed a decrease in HF-CSH group. Significantly increased contents of triglyceride, total cholesterol, LDL-cholesterol, leptin and insulin in the serum of HF-N group were returned to normal or even below normal levels by feeding 10% vegetable sprout powder diet. The increased activities of NADP-malate dehydrogenase (ME), glucose-6-phosphate dehydrogenase (G6PDH) and 6-phosphogluconate dehydrogenase (6PGDH) and lipoprotein lipase (LPL) in adiposetissue by HF-N group were decreased to the activity of normal fat group by feeding vegetable sprout powder in a dose-dependant manner. These results indicate that lipid metabolism in rats fed high-fat diet was suppressed by feeding vegetable sprout powder.

• Korean journal of applied entomology
• /
• v.55 no.4
• /
• pp.421-429
• /
• 2016

Tenebrio molitor larvae contain large amounts of proteins, lipids and other functional materials, enabling this insect to be used as an edible food source in animal feeds and for industrialization. Although many efforts have been made to set up mass rearing systems, few studies have been conducted to establish optimal rearing conditions for the production of high quality T. molitor larvae. Herein we investigated 1) the effects of additional diets on the survival and fecundity of the insect, 2) the relationship between oviposition period and the uniformity of larval size, 3) the effects of rearing density and temperature on insect development, and 4) the storage stability of eggs and pupae at low temperatures given possible temporary production discontinuation. The addition of carrot and zucchini to the traditional wheat bran diet significantly increased the survival and fecundity rate of adult T. molitor. Of the three different oviposition sampling periods (3, 7, and 14 days) used to investigate the uniformity of the hatched larvae in each treatment, the period of 3 and 7 days provided higher uniformity than the 14 days oviposition period. Larval development was faster at $30^{\circ}C$ than at 20, 25, and $35^{\circ}C$. Interestingly, oviposition rates were highest at $20^{\circ}C$ but showed much slower larval development and lower uniformity at $30^{\circ}C$. Regarding the effect of larval rearing densities (1, 10, 20, 30, 40, and 50 larvae per 90 mm diam. dish), larval weight was significantly reduced at higher rearing densities, but larval longevity and length were not influenced by rearing density. The 30 larvae/dish is suggested to be a reasonable density to be applied to mass production systems. When kept at $4^{\circ}C$, T. molitor eggs showed a significant reduction in hatching rate; however, when stored under the same conditions, pupae emergence rates remained high until 10 weeks, suggesting that storage at low temperatures is more suitable for the pupal stage than the egg stage. Our findings suggest that an increase in T. molitor adult survival and fecundity rates and a uniformity of hatched larval development can be achieved with the following recommendations: a combination diet (including wheat bran), a 7-day oviposition period; a larvae-rearing temperature of $30^{\circ}C$, a rearing density of 30 larvae/dish, and the storage of pupal stages at low temperatures in the case of rearing discontinuation. This study serves as a strong foundation for the successful mass production of high quality T. molitor larvae.

• Journal of the Korea Concrete Institute
• /
• v.23 no.6
• /
• pp.711-722
• /
• 2011

Beam-column gravity or Intermediate Moment frames subjected to unexpected large displacements are vulnerable when no seismic details are provided, which is typical. Conversely, economic efficiency of those frames is decreased if unnecessary special detailing is applied as the beam and column size becomes quite large and steel congestion is caused by joint transverse reinforcement in beam-column connections. Moderate seismic design is used in Korea for beam-column connections of buildings with structural walls, which are to be destroyed when the unexpected large earthquake occurs. Nonetheless, performance of such beamcolumn connections may be substantially improved by the addition of steel fibers. This study was conducted to investigate the effect of steel fibers in reinforced concrete exterior beam-column connections and possibility for the replacement of some joint transverse reinforcement. Ten half-scale beam-column connections with non-seismic details were tested under cyclic loads with two cycles at each drift up to 19 cycles. Main test parameters used were the volume ratio of steel fibers (0%, 1%, 1.5%) and joint transverse reinforcement amount. The test results show that maximum capacity, energy dissipation capacity, shear strength and bond condition are improved with the application of steel fibers to substitute transverse reinforcement of beam-column connections. Furthermore, several shear strength equations for exterior connections were examined, including the proposed equation for steel fiber-reinforced concrete exterior connections with non-seismic details.

• Journal of Korean Society of Forest Science
• /
• v.102 no.2
• /
• pp.170-175
• /
• 2013

This study was conducted to investigate the effect on the habitation of Monochamus alternatus, a vector insect of Pine wood nematode by the tended sound stumps for the developing forestry control methods of Pine wilt disease controls. Field cage plots (1 m ${\times}$ 1 m ${\times}$ 1 m) were established 12 units (Experiment1:4 units, Experiment2:8 Units) and were treated 4 kinds(February in 2010, February, April, June in 2011). The adults of M. alternatus were put into 4~5couples each the cage June in 2011. Presence or absence of the larva entrance holes and larva were detailed November in 2011. The larva were appeared in the sound stumps of sapling and young trees tended at February, April, June, the current emergence year of M. alternatus, but were not appeared in the sound stumps of sapling and young trees tended February in 2010, one year before the emergence of M. alternatus. The larva habitated in stumps of sapling were likely to be smaller in size in compare to the larva in stumps of young trees. In case of young tree, the larva were found at the cleft part of bark, but were not found at ridge part of bark. All observed larva appeared at part of bark and between the bark and the woody parts, but were not found at the woody parts. To develop the control guiding principal of sound stump after forest tending practice, further experiment need is in existence oviposition and larvae of vectors by height of stemps.