• 한국인터넷방송통신학회논문지
• /
• 제16권1호
• /
• pp.109-114
• /
• 2016

본 논문은 디지털 무선 전송시 채널에서 발생되는 부호간 간섭과 잡음의 영향을 최소화하기 위한 CCA (Compact Constellation Algorithm) 등화 알고리즘에서 적응 스텝 크기를 적용하여 이의 등화 성능 개선에 관한 것이다. 일반적으로 등화 알고리즘에서 적응을 위한 스텝 크기는 고정적으로 사용하지만, 제안 알고리즘에서는 등화를 위한 스텝 크기를 비선형 함수인 오차 신호에 비례하도록 변화시킨다. 이의 개선된 등화 성능을 보이기 위하여 등화기 출력 성상도, 잔류 isi, 최대 찌그러짐과 MSE와 SER을 적용하였으며, 이들을 고정 스텝 크기를 갖는 기존 CCA와 비교하였다. 컴퓨터 시뮬레이션의 결과 정상 상태 이후에서는 적응 스텝 방식의 CCA가 고정 스텝 방식의 CCA보다 우월함을 확인하였다.

• 전자공학회논문지
• /
• 제50권6호
• /
• pp.131-137
• /
• 2013

광각 카메라는 단 초점 렌즈를 장착하여 넓은 시야의 이미지를 처리하는데, 렌즈의 광학 문제로 인해 이미지에 베럴 왜곡(barrel distortion)이 발생한다. 본 논문에서는 베럴 왜곡을 실시간 디지털 신호처리를 통해 보정하기 위한 낮은 복잡도의 프로세서 구조를 제시하고 이를 실제 구현하여 유효성을 검증하였다. 제안하는 왜곡 보정 프로세서는 하드웨어 복잡도를 낮추기 위해서, 좌표 위치 보정에 필요한 계산을 점증적(incremental)으로 수행한다. 또한, 높은 보정 속도를 달성하기 위해 파이프 라인 구조로 설계하였다. 설계된 보정 프로세서는 $0.11{\mu}m$ complementary metal-oxide semiconductor(CMOS) 공정을 사용하여 14.3K의 논리 게이트로 구현되었다. $2048{\times}2048$ 픽셀 영상에 대하여, 최대 314MHz의 동작 주파수로 초당 74.86번의 속도로 보정이 가능하다.

• 한국인터넷방송통신학회논문지
• /
• 제15권1호
• /
• pp.131-137
• /
• 2015

본 논문은 QAM 신호를 전송하는 시스템에서 시분산 채널에서 발생되는 진폭과 위상 찌그러짐에 의한 부호간 간섭을 경감시키기 위한 적응 등화 알고리즘인 MMA (Multiple Modulus Algorithm)에서 오차 신호의 비선형 함수를 이용하여 등화 성능을 개선할 수 있는 VSS-MMA (Variable Step Size - MMA) 알고리즘에 관한 것이다. 기존 MMA에서는 고정 스텝 크기를 이용하여 적응 등화기의 탭 계수를 얻지만, 제안 VSS-MMA에서는 오차 신호의 비선형성을 기본으로 가변 스텝 크기를 적용하여 탭 계수를 얻을 수 있다. 가변 스텝 크기을 이용하므로서 기존 MMA보다 개선된 등화 성능을 얻을 수 있음을 컴퓨터 시뮬레이션을 통해 확인하였으며, 이를 위한 성능 지수로는 등화기 출력 신호 성상도, 잔류 isi양, 최대 찌그러짐과 MSE, SER을 사용하였다.

• Journal of Welding and Joining
• /
• 제32권4호
• /
• pp.69-74
• /
• 2014

Welding distortions of large steel structures had mainly been estimated with some simplified formula obtained by lots of experience and numerical analyses for small steel structures. However, the large structures would have different characteristics of distortion with welding because of their own stiffness coming from the size itself. Therefore, in order to find some measures for preventing welding distortion of large structure, it is requite in advance to precisely analysis thermal stress and distortion during welding of the structure. Numerical analysis for larger structure has been known to take large amount of calculation time and have a poor convergency problem during the thermo-elasto-plastic calculation. In this study, a hybrid method is proposed to analysis the thermal stress and distortion of a large steel plate with the finite element analysis by incorporating with temperature distribution of the plate calculated by an analytical solution. The proposed method revealed that the thermo-mechanical analysis for welding of the large structure could be performed with a good convergence and produced precise results with much reduced time consumption.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.789-792
• /
• 2003

Pipe inspection has a great importance to ensure safety for the nuclear power plant. In this paper, we designed visual inspection module for the tube internal, which diameter is 15${\sim}$20mm. And we made inspection module which consisted of CCD camera and light. And the relation between image and real world coordinate is established. Image processing is performed to calculate mapping parameter and analyze the size of defect. For the calculation of mapping parameter, experiment is performed using grid type test pattern. Acquired image is processed to extract image coordinate. Edge detection, thresholding, median filtering and morphology filtering is applied to extract grid pattern. Extracted image coordinate is used to calculate image to real world mapping. Lens distortion was considered and corrected to get exact data. Coordinate transformation data is provided for the users to recognize easily. Experiment was performed using grid type test pattern, we extracted lens distortion parameter and real coordinate of defect point. Radial distortion of lens was corrected but tangential distortion was not considered. As continuum to this study, the tangential distortion of lens is considered and improvement of analy zing technique for the tube internal be explored continuously.

• Journal of Welding and Joining
• /
• 제28권1호
• /
• pp.54-59
• /
• 2010

Ship Blocks are assembled by welding, and among them, welding between large blocks (Pre-erection stage) is used as feature of butt. In this process, local material has a experience of thermal cycle and become finally shrunk. As for inconsistency of shrunk weldments and adjacent regions, ship structure would be deformed locally and globally. Thermal distortion analyses are done for control of these processes, and methodologies capable of ship block size among them are using 2-D shell element in FEM. A shell element takes charge of plate, so it has its thickness which is important for angular distortion by welding. By the way, a butt-welding consists normally of several passes, and weldment thickness are different at each pass. If a calculated final one-time welding shrinkage is acting on the shell element whose thickness is same as it of plate, then deformation value must be underestimated. This research developed a methodology that total deformation after multi-pass welding can be analyzed by one time at shell element having original thickness of its plate. We use the SDB thermal distortion analysis method and verified by several experiment. The both experimental and analysis results showed good agreements.

• 전자공학회논문지B
• /
• 제33B권3호
• /
• pp.133-141
• /
• 1996

As the recording density of digital magnetic recording channels increased, the nonlinear distortion caused by inadequate rise-times, demagnetizing field, and overwrite effect during the recording process becomes significant, resulting in limitation on the recording rate. In this paper, a new method for identifying the nonlinear distortion in hihg-density magnetic recording channel using and i.i.d. (independent, identically distributed) inut is described. The proposed method does not require the operatin of large-size matrix inversion which are necessary for the conventional method, and it enables us to estimate nonlinear parameters transition shifts, which can be used to compensate the nonlinear distortion, is demonstrated by computer simulations.

• 전자공학회논문지B
• /
• 제33B권4호
• /
• pp.101-110
• /
• 1996

Color image quantization is a process of selecting a set of colors to display an image with some representative colors without noticeable perceived difference. It is very important in many applications to display a true color image in a low cost color monitor or printer. the basic problem is how to display 224 colors with 256 or less colors, called color palette. In this paper, we propose an algorithm to design the 256 or less size color palette by using spatial maskin geffect of HVS and subjective distortion measure weighted by color palette by using spatial masking effect of HVS and subjective distortion measure weighted by color activity in 4*4 local region in any color image. The proposed algorithm consists of octal prequantization and subdivision quantization processing step using the distortion measure and modified Otsu's between class variance maximization method. The experimental results show that the proposed algorithm has higher visual quality and needs less consuming time than conventional algorithms.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 ITC-CSCC -1
• /
• pp.421-424
• /
• 2000

In this paper, we propose a window warping method to solve stereo matching problems in projective distortion region. Because the projective distortion region cant t be estimated with fixed-size block matching algorithm, we use the window warping technique in block matching process. The position of a reference window to resample is obtained adaptively according to the degree of reliability in disparity estimated previously. The initial disparity and reliability are obtained by applying a well known hierarchical strategy. The experimental result shows that considerable improvement is obtained in the projective distortion region.

• 한국산업정보학회논문지
• /
• 제19권4호
• /
• pp.41-52
• /
• 2014

본 논문은 O링의 치수 측정에 있어 고가의 대 중형 머신비전 장비를 대체할 수 있는 소형 머신 비전 검사 장비에 기반한 O링 부품 내 외경 측정 알고리즘을 제안한다. 백라이트 조명하에 하나의 CCD 카메라를 이용하여 측정 평면으로 부터 영상을 획득하는 소형 머신 비전 검사장비에 의해 획득된 영상을 제안한 영상처리 기법 알고리즘을 이용하여 O링의 외경 및 내경치수를 측정한다. 치수 측정의 정확도를 높이기 위해 렌즈계 왜곡 보정과 원근 왜곡 보정을 소프트웨어적 기법으로 보정 하였고 O링 형상을 고려하여 타원정합 모델을 적용하였으며 보다 타원 정합의 신뢰성을 높이기 위해 RANSAC알고리즘을 적용하였다.