• 한국생활과학회지
• /
• 제9권2호
• /
• pp.205-213
• /
• 2000

The purpose of this study was to study the degree of consciousness and satisfaction of body cathexis of high school girls' lower bodyshape. The subjects in this study were 296 high school girls. The results were as follows : 1. The degree of satisfactions of girth items in lower part of the body were influenced by real body size than ideal body size. But the degree of satisfaction of weight was influenced by ideal body size and height was influenced by real size body. 2. The high school girls thought ideal body shape was tall in height, long in leg, slim in girth and light in weight. Therefore, they wanted to have slimmer, longer, and lighter body size than real body size. 3. The high school girls were more satisfied with lean body type than with standard body type or with obesity body type. Therefore they wanted to be lean body type.

• 한국의류학회지
• /
• 제25권2호
• /
• pp.315-326
• /
• 2001

This study is to suggest data for setting school uniform size with the size satisfaction degree through finding out the physical body change and uniform size problems following an increase in age during middle school girl days. For this purpose, by analyzing the physical body size data of 13~15 age of girls among $\ulcorner$human body size data of the youth for product design$\lrcorner$publicized under sponsorship of National Technology Quality Institute in 1999 the physical body size change by part following an increase in age during middle school girl days was found out and the most frequent physical body size by grade was suggested. Questionnaire about uniform production status and product size at the object of uniform makers were measured directly, a school uniform wearing status and size satisfaction degree by part were at the abject of middle school girls were examined by means of questionnaire and unsatisfactory factors in uniform size were found out. Based on collected data the most optimum product size in each part by item were suggested. The method of suggesting the most optimum size suitability by item was decided based on the result of survey into corresponding title and product size by maker and that of survey into the size satisfaction degree of middle school girls by maker, and the product size of maker showing the highest size satisfaction degree was selected as the most optimum product size.

• 대한가정학회지
• /
• 제42권4호
• /
• pp.179-186
• /
• 2004

The purpose of this study was to analyzed factors that influenced the degree of satisfaction difference of domestic and imported theatre costumes. One hundred and fifty theatrical artists were surveyed by questionnaires, and response from 128 was statistically analyzed. The data was analyzed using frequency, and paired t-test with SPSSWIN 10.0. The results were as follows. 1. The degree of satisfaction between domestic and imported theatrical costumes was different significantly. 2. The degree of satisfaction of domestic theatrical costumes was tow in the areas of design, color, fabric, and suitability with a historical background, compared with imported costumes. A major cause of the low degree of satisfaction was the lack of funds and professional theatrical costume designers. 3. The degree of satisfaction of imported theatrical costumes was low in the cost, size, and alteration and mending facilities, compared with the domestic costumes. The problems of size was caused by the shape difference between Koreans and a foreigners 4. further research should be conducted into the theatre costumes suitable for the domestic theatrical artists's size, and body shape.

• 한국생활과학회지
• /
• 제11권1호
• /
• pp.59-67
• /
• 2002

The purpose of this study was to investigate the recognition and satisfaction of the lower body shapes of male college students. The subjects in this study were 178 male college students. The results were as follows: 1. The degree of recognition and satisfaction of girth items in lower part of the body scored average. Subjects tended to be dissatisfied with their height. 2. The degree of satisfaction of waist girth and weight was influenced by the real body size than the degree of recognition. And abdomen girth, hip girth, ankle girth, leg length, hight, crotch length were affected by the degree of recognition than the real body size. 3. Subjects were more satisfied with standard lower body type than with lean and obese ones.

• 한국컴퓨터정보학회논문지
• /
• 제3권3호
• /
• pp.129-137
• /
• 1998

국민경제에서 중소기업이 차지하고 있는 비중은 계속 증가하고 있는 가운데 중소기업의 경영상의 애로점으로 자금 조달의 문제가 가장 심각한 것으로 지적되고 있다. 본 연구는 중소기업의 경영 문제 가운데 재무구조의 실태를 파악하고 이를 대기업 또는 우리나라산업평균 재무비율과 비교함으로써 중소기업의 재무안정성 비율을 분석한 것이다. 조사 분석 결과 전체적으로 산업별 표준비율에는 그 수준이 미치지 못하고 있으나 산업평균과 비교할 때 그 수준이 양호한 것으로 조사되었으며 산업평균에 비해 안정성과 유동성이 양호한 반면 차입금 의존도가 대단히 낮은 것으로 조사되어 국가 또는 행정 자치적인 측면에서 중소기업 자금 지원 정책이 개발되어야 할 것으로 인식되었다.

• 한국수정란이식학회지
• /
• 제14권3호
• /
• pp.177-184
• /
• 1999

This study was conducted to find out the effect of follicle size and oocyte type on in vitro maturation of poricine follicular oocytes. TCM-HEPEAS medium was used to basic medium, and the oocyte matured in vitro was stained with the Rapid staining method. The results obtained were summarized as follows; 1. The number of follicles an ovary was 20.5. The number of A-and B-typed oocytes an ovary was 2.34. The proportion of A-and b-types oocytes was 40% of the recovery oocytes. 2. Cumulus expanison indexes(CEI) by the follicle size were 1.62∼2.34(<2mm), 1.27∼2.28(2∼5mm) and 1.46∼2.75(>5mm). It was no differ to maturation rate by the follicle size. 3. The degree of oocyte maturation based on oocyte type did not differ for B-and C-typed oocyted but the index of oocyte type A was higher than that of b-and C-typed oocytes. 4. When follicluar oocytes were cultured for 42 hours, the proportion of the Met-II(second metaphase) stage were 22.5% (degree 1), 35.4%(degree 2) and 65.5% (degree 3).

• 한국응용과학기술학회지
• /
• 제21권4호
• /
• pp.335-344
• /
• 2004

In this work, the properties as polishing wax for automobile of O/W type microemulsion containing wax, liquid paraffine and quaternaryammonium salt was investigated. The microemulsions were prepared at $96{\sim}97^{\circ}C$ by the phase inversion method, and polyoxyethylene(20) sorbitan monooleate (POE(20)SMO) and distearyl dimethyl ammonium chloride(D.D.A.C) as the emulsifiers were used. The mean particle size of the rnicroemulsions was about 7${\pm}$0.5nm and as the properties of polishing wax, gloss increased degree, water resistant gloss degree, initial and final contact angle after water resistance were tested. The result was that the value of water resistantance and contact angle were decreased with increasing amount of POE(20)SMO and D.D.A.C., while the gloss degree values did not affected. And the rnicroemulsion blended with mono ethylene glycol(MEG) of 5${\sim}$15wt% showed smaller particle size and more stable particle size distribution than without MEG. Finally, this microemulsion showed more excellent values of gloss degree, the water resistant gloss degree and contact angle, than two kinds of commercial polishing wax for automobile.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1995년도 제2회 단조심포지엄 단조기술의 진보
• /
• pp.100-123
• /
• 1995

The relationship between plastic deformation and crystal grain change in warm forging processes of SM100 carbon steel is studied. If the carbon steel is deformed in warm forging temperature (about recrystallization range), the crystal grain and cementite of the internal part are changed, so material properties are changed. Some experimental values, such as the elliptic degree of cementite, the grain size of cementitie and ferrite grain size, are investigated. When the plastic deformation proceeds, the elliptic degree of cementite becomes large, the grain size of cementite particle is small, and the size of ferrite grain appears fine by recrystallization. The elliptic degree of cementite has a considerable effect on formability. The distribution of effective strain in the forging is calculated by the rigid visco-plastic FEM analysis. The effective strain distribution obtained from the FEM simulation is compared with the experimental result. At effective strain 0.3 dynamic recovery and dynamic recrystallization begin, over 2.5 the organization of material has better quality that is suitable for the following cold forming.

• Steel and Composite Structures
• /
• 제45권2호
• /
• pp.263-279
• /
• 2022

With the span and arch rib size of concrete-filled steel tube (CFST) arch bridges increase, the hydration heat of pumped mass concrete inside large-size steel tube causes a significant temperature variation, leading to a risk of thermal stress-induced cracking during construction. In order to tackle this phenomenon, a hydration heat conduction model based on hydration degree was established through a nonlinear temperature analysis incorporating an exothermic hydration process to obtain the temperature field of large-size CFST. Subsequently, based on the evolution of elastic modulus based on hydration degree and early-age creep rectification, the finite element model (FEM) model and analytical study were respectively adopted to investigate the variation of the thermal stress of CFST during hydration heat release, and reasonable agreement between the results of two methods is found. Finally, a comparative study of the thermal stress with and without considering early-age creep was conducted.

• 한국염색가공학회지
• /
• 제22권3호
• /
• pp.229-238
• /
• 2010

Poly($\varepsilon$-caprolactone) nano/microcapsules(nmcPCL) containing phytoncide oil were synthesized by emulsion diffusion method using ethyl acetate and poly(vinyl alcohol) (PVA) as an organic solvent and an emulsion stabilizer respectively. The influence of the degree of saponofication of the PVA and the weight ratio of core to wall materials was investigated to design nanocapsules in terms of particle size, morphology, and emulsion stability. The encapsulated nmcPCL were characterized by FT-IR spectrometry, particle size analyzer and scanning electron microscope. Mean size of nanocapsules prepared with PVA with a degree of saponofication of 87% was smaller than those of PVA with a degree of saponofication of 98.5% and the mean particle size of the capsules decreased with increasing core/shell ratio.