• ETRI Journal
• /
• 제39권3호
• /
• pp.319-325
• /
• 2017

The decoding process of a quasi-cyclic low-density parity check code requires a unique type of rotator. These rotators, called multi-size cyclic-shifters (MSCSs), rotate input data with various sizes, where the size is the amount of data to be rotated. This paper proposes a low-complexity MSCS structure for the case when the sizes have a nontrivial common divisor. By combining the strong points of two previous structures, the proposed structure achieves the smallest area. The experimental results show that the area reduction was more than 14.7% when the proposed structure was applied to IEEE 802.16e as an example.

• 한국분무공학회지
• /
• 제15권4호
• /
• pp.170-176
• /
• 2010

This paper describes the grid-size dependency of the conventional Eulerian-Lagrangian method to spray characteristics such as spray penetration and SMD in modeling DME sprays. In addition, the reduction of the grid-size dependency of the present Gas-jet model was investigated. The calculations were performed using the KIVA code and the calculated results were compared to those of experimental result. The results showed that the conventional Eulerian-Laglangian model predicts shorter spray penetration for large cell because of inaccurate calculation of momentum exchange between liquid and gas phase. However, it was shown that the gas-jet model reduced grid-size dependency to spray penetration by calculating relative velocity between liquid and ambient gas based on gas jet velocity.

• 정보처리학회논문지D
• /
• 제11D권3호
• /
• pp.691-702
• /
• 2004

본 문은 고속으로 이송되는 컨베이어 벨트 환경에서 획득된 대용량 소포 영상에서 다양한 관심영역(ROI：Region of Interest)을 고속 추출할 수 있는 방법을 제안한다. 제안된 방법의 친 번째 단계에서는 영상을 32${\times}$32 픽셀 크기의 마스크로 나누고 그 중 내부 픽셀의 최대값과 최소값의 차이값이 최저 동적 입계값보다 큰 경우에 1차 후보로 검출한다. 두 번째 단계에서는 1차 후보 마스크를 다시 8${\times}$8크기의 서브마스크로 나누고 적셀 값의 편차(deviation)을 기준으로 최저 임계값보다 큰 마스크만 남김으로서 불필요한 영역을 제거한다. 이러한 전처리 과정을 거쳐 1차원 바코드, 2차원 바코드, 소포의 외형 경계, 레이블 및 문자와 같은 소포의 정보가 기록되어 있는 영역(ROI)을 제외한 나머지 영역을 제거한다. 후처리 과정에서는 위의 ROI 중 2차원 바코드 영역만을 추출하기 위해서 각각의 ROI에 대하여 기준축을 생성한 결과를 이용하여 각각의 영역을 검증하였다. 이와 같은 방법으로 실험한 결과 대용량 소포영상에서 약 200msec 이내에 다양한 ROI를 추출하였으며 100%의 정확도로 2차원 바코드 영역을 지정할 수 있음을 확인하였다.

• 정보처리학회논문지A
• /
• 제19A권1호
• /
• pp.45-50
• /
• 2012

최근 내장형 프로세서가 다양한 휴대 기기에서 사용이 급격히 증가됨에 따라, 빠른 수행 속도와 저전력을 지원하는 내장형 프로세서를 제작하기 위해 대상 응용 프로그램에 최적환 된 설계가 요구되고 있다. 이를 위해, 프로세서들은 다중 출력 명령어형태의, 특별한 명령어들을 추가하고 있다. 여기서 다중 출력 명령어란 다수의 결과값을 병렬적으로 출력하는 명령어를 말한다. 하지만, 이러한 다중 출력 명령어들은 기존 컴파일러에서 생성하지 못하는 문제점이 있다. 그래서, 이를 위한 컴파일 알고리즘이 개발되었지만, 이 알고리즘에서는 register pressure를 고려하지 않아서 최적의 성능을 발휘할 수가 없었다. 본 논문에서는 register pressure를 고려하는 알고리즘을 새롭게 제안하고, 그 결과 기존 알고리즘에 비해서 평균 3%의 코드 사이즈 감소와 2.7% 수행 시간 향상을 더 이룰 수 있었다.

• Steel and Composite Structures
• /
• 제38권2호
• /
• pp.121-139
• /
• 2021

Ultra-high strength concrete (UHSC) encased steel columns are receiving growing interest in high-rise buildings owing to their economic and architectural advantages. However, UHSC encased steel columns are not covered by the modern fire safety design code. A total of 14 fire tests are conducted on UHSC (120 MPa) encased steel columns under constant axial loads and exposed to ISO-834 standard fire. The effect of load ratio, slenderness, stirrup spacing, cross-section size and concrete cover to core steel on the fire resistance and failure mode of the specimens are investigated. The applicability of the tabulated method in EC4 (EN 1994-1-2-2005) and regression formula in Chinese code (DBJ/T 15-81-2011) to fire resistance of UHSC encased steel columns are checked. Generally, the test results reveal that the vertical displacement-heating time curves can be divided into two phases, i.e. thermal expansion and shortening to failure. It is found that the fire resistance of column specimens increases with the increase of the cross-section size and concrete cover to core steel, but decreases with the increase of the load ratio and slenderness. The EC4 method overestimates the fire resistance up to 186% (220 min), while the Chinese code underestimates it down to 49%. The Chinese code has a better agreement than EC4 with the test results since the former considers the effect of the load ratio, slenderness, cross section size directly in its empirical formula. To estimate the fire resistance precisely can improve the economy of structural fire design of ultra-high strength concrete encased steel columns.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 하계종합학술대회 논문집(1)
• /
• pp.317-320
• /
• 2004

In this paper, it is analyzed a performance improvement of ACL Packet using turbo code scheme in bluetooth system. In order for segment to improve the transfer capability, the transmission of messages have been simulated using a fragmentation that begins with the total package and incremental fragmentation for each layer using the TCP to define the resultant packet size and the level of fragmentation for each proceeding layer. This turbo code scheme decreases transmission time of L2CAP baseband packets by sending packets. From the results, we were able to obtain packet transmission time, optimal TCP packet size, ACL(DM packet) in AWGN.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 D
• /
• pp.718-720
• /
• 2000

Turbo Code is one of the most useful and powerful channel coding technique. It is adopted in radio transmission of IMT-2000, both CDMA2000 and W-CDMA system. The performance of this code depends on many parameters such as encoder memory size, free distance of codewords, interleaver size, number of decoding iteration, and so on. This paper describes a Multi-Stage Interleaver which is used in Turbo Codes for W-CDMA channel coding. We compare the performance of a Multi-Stage Interleaver with that of Mother Interleaver. The simulation results show that Multi-Stage Interleaver performs better than Mother Interleaver in bit error rate from $10^{-3}$ to $10^{-6}$.

• 한국구조물진단유지관리공학회 논문집
• /
• 제3권4호
• /
• pp.173-178
• /
• 1999

KS-code(KS B 0896) for nondestructive ultrasonic testing classifies the quality level by ratio of flaw size to plate thickness only. But stress distributions using verification(3 point bending test) show that location of the flaws is more important than the flaw size. So. KS-code should take the effect of flaw location for classifying the quality level of welded steel structures.

• 한국구조물진단유지관리공학회 논문집
• /
• 제3권1호
• /
• pp.157-162
• /
• 1999

KS-code(KS B 0896) for nondestructive ultrasonic testing judge the quality level by ratio of flaw size to plate thickness only. But stress distributions using finite element analysis show that location of the flaws are more important than the flaw size. So, KS-code should take into account of flaw location for judging the quality level of welded steel structures.

• 정보보호학회논문지
• /
• 제12권1호
• /
• pp.43-54
• /
• 2002

McEliece introduced a public-key cryptosystem based on Algebraic codes, specially binary classical Goppa which have a good decoding algorithm and vast number of inequivalent codes with given parameters. And the advantage of this system low cost of their encryption and decryption procedures compared with other public-key systems specially RSA, ECC based on DLP(discrete logarithm problem). But in [1], they resent new attack based on probabilistic algorithm to find minimum weight codeword, so for a sufficient security level, much larger parameter size [2048, 1608,81]is required. Then the big size of public key make McEliece PKC more inefficient. So in this paper, we will propose New Type PKC using q-ary Hyperelliptic code so that with smaller parameter(1 over 3) but still work factor as hi인 as McEliece PKC and faster encryption, decryption can be maintained.