• 설비공학논문집
• /
• 제24권12호
• /
• pp.846-851
• /
• 2012

The radiant floor heating system is traditional heating system in korea. Radiant floor heating is small in vertical temperature difference, air stream and radiant heat distribution is uniform. And radiant floor heating system provide thermal comfort conditions to the a resident. This study was undertaken to evaluate the physiological-subjective responses of the resident's posture change such as sitting and standing. The experimental investigations were carried out in climate chamber, and subjects were 4 college-age students in good health. The physiological response was skin temperature and subjective response was undertaken survey of TSV and CSV. The results were summarized as follows; The comfortable temperature range of plantar surface was $35.1{\sim}38.9^{\circ}C$ and buttock surface was $37.8{\sim}39.3^{\circ}C$.

• 한국자동차공학회논문집
• /
• 제22권6호
• /
• pp.104-112
• /
• 2014

Generally, numerical approaches of evaluation for vehicle seat comfort have been studied without considering time-dependent characteristics and the only seating moment have been considered in seat design. However, the comfort not only at the seating moment but also in the long-term should be evaluated because the passengers are sitting repeatedly on the seat to drive the vehicle for hours. So, the aim of this paper is to carry out a quantitative evaluation of the time-dependent mechanical characteristics of seat foams and to suggest a process for predicting the viscoelastic deformation of seat foam in response to long-term driving. To characterize the seat materials, uniaxial compression and tension tests were carried out for the seat foam and stress relaxation tests were performed for evaluating the viscoelastic behavior of the seat foam. A unit solid element model was used to verify the reliability of the material model with respect to the compression behavior of the seat foam. It is not straightforward to evaluate the time-dependent compression of foams using the explicit solver because the viscoelastic material model is limited. To use the explicit solver, the material model must be modified using stress-degradation data. Normalized stress relaxation moduli were added to the stress-strain curves obtained under static conditions to achieve a time-dependent set of stress-strain relations that were compatible with the implicit solver. There was good agreement between the analysis results and experimental data.

• 대한인간공학회지
• /
• 제33권1호
• /
• pp.59-68
• /
• 2014

Objective: The aim of this study is to investigate the effect of BackJoy on how it effectively reduces the physical load generated in a posture in which the user sits, increases user's comfort and satisfaction, and maintains the correct posture. Background: Because of development of science and economic development, most office workers and students spend about 75% of their working time in chairs. However most of them have a poor posture. Method: This experiment conducted measurement using a pressure mat and surveyed to evaluate fatigue level, satisfaction and comfort of sit. The study is experimented 20 male and 14 female participants. The participants carried out four different types of tasks and each task took 20 minutes long. Results: In the case of experiment results before and after the use of BackJoy, average pressure, contact area and pressure per unit area appear to prove that using BackJoy is more effective. Conclusion: Through this study, the BackJoy's effects for the maintenance of good posture and loads that occur in the body are reduced. In the future study, there are some researches needed for various verifications using an EMG sensor that shows loads of vertebrae and we need to analyze each group of the participants by dividing them. Application: The evaluation method used in this study can be applied to evaluating ergonomic chairs.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.376-380
• /
• 2000

All chairs are uncomfortable in the long run, but some chairs become uncomfortable more rapidly than others, and in any particular chair, some people will be more uncomfortable than others. Comfort will depend upon the interaction of chair characteristics, user characteristics, and task characteristics. In this study, we intend to design the comfortable office chair by investigating the anthropometric and biomechanical aspects for Korean. Therefore, we determine the design dimensions using the analysis of anthropometric data. With these dimensions, we design the chair mechanism of which backrest reclines with increasing chair pan declination. This mechanism allows the back to get adequate support at the correct level for any backrest declination. Also, the lumbar support in the backrest descends with increasing backrest reclining. By using this chair, a considerably better sitting posture can be obtained, and uncomfortable feeling and back pain may be prevented.

• 한국산업융합학회 논문집
• /
• 제1권1호
• /
• pp.21-30
• /
• 1998

The purpose of this study is to clarify the floor temperature on the human body and to estimate thermal comfort zone in a heated room. In order to evaluate the effects of floor heating, a series of experiments were carried out using Korean subjects. The following experiments were conducted: 1) to obtain the effective radiation area and configuration factors of the person in the sitting posture on a floor to get the mean radiant temperature, 2) to measure contacted area of the person to the floor to calculate conduction heat rate, 3) to measure convective heat transfer coefficient of the body and 4) to know the thermal comfort zone of indoor environment heated by ON-DOL. Subjects were exposed to the following conditions: combinations of air temperature $20^{\circ}C$, $22.5^{\circ}C$, $25^{\circ}C$, and floor temperature $20^{\circ}C$, $22.5^{\circ}C$, $25^{\circ}C$, $27.5^{\circ}C$, $30^{\circ}C$, $32.5^{\circ}C$, $35^{\circ}C$, $37.5^{\circ}C$, $40^{\circ}C$ under still air and 50% relative humidity in the controllable artificial climate chamber. To evaluate the effect of heat conduction between the body and a floor modified mean skin temperature was defined. Weighting coefficient to calculate mean skin temperature were modified with the contacted area. The experiments revealed a positive correlation between the modified operative temperature and the modified mean skin temperature. The modified mean skin temperature can indicate the effect of heat conduction between body and a floor surface.

• 한국의류산업학회지
• /
• 제14권2호
• /
• pp.261-268
• /
• 2012

The purpose of this study is to investigate problems of design, fitness, suitability for movement, and wearing comfort of jumper for Korean military tank drivers through analysis of actual wearing condition by questionnaire and field evaluation and to provide basic data for developing its improved design. The survey was done for 477 military tank drivers and evaluation was performed using thermal manikin to measure insulation. The overall satisfaction for design of jumper for military tank driver was over 3.5(likert scale). The overall satisfaction for fitness of jumper for military tank driver was also over 3.5. The satisfactions for material was between 2.39 and 3.13 and the satisfaction for pilling property was the lowest, followed by static property and shape stability after laundering. The satisfactions for movement suitability were standing(3.81), sitting(3,38), raising hand(forward: 2.90, sideward: 3.01), respectively. In insulation evaluation of jumper for military tank drivers and outwears(jacket, jumper), the insulation of jumper for military tank drivers was lower than outwear(jumper) and same with outwear(jacket). The insulation in dynamic and still condition(without wind) of jumper for military tank driver was 0.37clo and 0.31clo, respectively. Its decreation rate in dynamic condition comparing to still condition was 59% which was lower than jacket(0.73clo) and jumper(1.15clo).

• 대한산업공학회지
• /
• 제23권4호
• /
• pp.779-791
• /
• 1997

The purpose of this study is to measure a perceived joint discomfort in the seated and standing position, and to provide ranking systems of perceived joint discomfort. Nineteen mole subjects with no history of musculo-skeletal disorders participated in the experiment. Their physical characteristics were: age $-25.4{\pm}2.7$years, stature $-171.9{\pm}6.0cm$, and body weight $-67.1{\pm}7.0kg$. The results showed that the perceived joint discomforts were different depending upon the joints involved in motion and their movement directions (degree of freedom of motions), which implied that the human body motions and their degrees of freedom should be classified into several distinct classes that need to be assigned different weights of postural stress. Therefore, three ranking systems based on the perceived joint discomforts were suggested, which were classified by the degree of freedom of motions and joints, by only degree of freedom motions, and by joints involved in motion, respectively. In the seated position, the hip movement was the most stressful, the bock was the second, and the shoulder was the third. Likewise, in the standing postures, the hip was the most, the bock was the second, and the ankle was the third. It was expected that these joint motion ranking systems could be used by practitioners of health and safety to improve the comfort of working postures in industry.

• The Journal of Korean Physical Therapy
• /
• 제12권2호
• /
• pp.229-238
• /
• 2000

A properly prescribed wheelchair may be able to normalize tone. decrease pathologic reflex activity, improve postural symmetry, enhance range of movement, maintain and/or improve skin conduit)n. increase comfort and sitting tolerance, decrease fatigue, and improve function of the autonomic nervous system. Whereas a poorly prescribed one can actually exacerbate the problems associated with a disability. Maintained for longer without relief, pressure concentrations may also lead to tissue breakdown. Pressure sores continue to be a major problem for many disabled individuals. Many groups of disabled individuals have a very high incidence of pressure sores, including those individuals with spinal cord injuries. hemiplegia, multiple sclerosis. cancer. and the disabled geriatric population. It is important to understand the factors which predispose an individuals to the development of a pressure sores. Those factors can divided into extrinsic factors, related to the individual's immediate environment and intrinsic factors. related to their medical or physical condition. Pressure sores are generally preventable through sensible pressure management based on an understanding of the causes of pressure sores, risk factors and methods of redistributing pressure.

• 한국의류학회지
• /
• 제35권2호
• /
• pp.136-145
• /
• 2011

This study identifies methods to design patterns for jeans that are suitable for women in their twenties. Five patterns suggested by previous researchers were used to draw the same size of jeans (waist 67 and hip 91). The author compared and analyzed the measurements and shapes of the patterns, ranging from waist to crotch. Samples were produced based on these patterns and then tests were conducted to observe the dynamic functions and exteriors of the samples. The dynamic functions observed in this study include walking, ascending stairs, descending stairs and sitting on chairs. The results of the current study are as follow. The best evaluated pattern in terms of exteriors is the one where the hips and thighs are tightest compared to other patterns and where the back part is wider than the front part. This pattern also received high evaluations in dynamic functions due to comfort when walking. Regarding ascending or descending stairs, the tests found that all its parts (except the front crotch) are more comfortable than those of any other patterns. All these results show that a comfortable fit and easy movement is possible when the crotch width of the back is broader than the hip width so that the hips are comfortably supported.

• 패션비즈니스
• /
• 제26권2호
• /
• pp.83-94
• /
• 2022

The purpose of this study was to analyze the reality of clothes-wearing among physically disabled women and propose trouser designs. As a research method, an in-depth interview method was adopted for 10 women in their 30s and 50s with lower limb disabilities who could wear trousers and use wheelchairs. The study results identified the following factors that should be considered in the design of trousers. First, a semi-casual design that could hide physical deficiencies, was not different from ready-made clothes and enabled various looks was desirable. Second, the proper material would have little transformation in the form, have remarkable durability and laundry fastness, two-directional stretch, and hide deficiencies with a sense of thickness and density. Third, an "L-frame" pattern in a sitting position, and a straight fit were desirable. Finally, pockets can impose pressure according to their form, size, position, and sewing method, highlighted the need for a sewing approach to minimize seams in the fabric. For adjustment, an elastic band would be a good choice in terms of type, length, position, and material as it could satisfy both the convenience of putting on and taking off and comfort in wearing at the same time. Decorative design details can also impose pressure according to a sense of thickness, which means that they should be avoided in parts that are close to the body or can impose pressure according to posture.