• 한국정보통신학회논문지
• /
• 제19권4호
• /
• pp.895-902
• /
• 2015

본 논문은 대형 터치스크린을 위한 고속 터치감지 및 노이즈 제거를 위한 FDCS (Frequency division concurrent sensing) 기법을 제안한다. 기존의 터치스크린 감지방식은 대부분 구동신호를 순차적으로 인가하고 순차적으로 센싱신호를 분석하기 때문에 감지속도가 터치스크린 크기에 따라 급격히 감소하여 대형터치스크린에 적용하기 어려운 문제점이 있다. 제안된 기법은 모든 드라이브라인에 서로 다른 주파수의 신호를 동시에 인가하고 각 센스 라인의 신호를 주파수 영역에서 분석하는 기법으로 대형스크린에서도 고속의 감지속도를 제공한다. 또한 주파수영역에서 노이즈 필터링기법을 제안하여 터치감지신호는 누적하고 노이즈는 상쇄하며, 터치스크린의 주파수전달함수의 역의 특성을 가지는 pre-distortion equalizer를 적용하여 터치감도 SNR을 더욱 개선한다. 23" 대형 터치스크린 모델에 실제의 환경 노이즈를 적용하여 실험한 결과 본 제안기술이 기존 기법 대비 frame scan rate을 274%, SNR을 43dB 증가시킴을 보인다.

• Journal of Power Electronics
• /
• 제17권2호
• /
• pp.389-397
• /
• 2017

A control scheme for stand-alone inverters that utilizes an inductor current observer (ICO) is proposed. The proposed method measures disturbance load currents using a current sensor and it estimates the inductor current using the ICO. The filter parameter mismatch effect is analyzed to confirm the ICO's controllability. The ICO and controllers are designed in a continuous-time domain and transferred to a discrete-time domain with a digital delay. Experimental results demonstrate the effectiveness of the ICO using a 5-kVA single-phase stand-alone inverter prototype. The experimental results demonstrate that the observed current matches the actual current and that the proposed method can archive a less than 2.4% total harmonic distortion (THD) sinusoidal output waveform under nonlinear load conditions.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 F
• /
• pp.2259-2261
• /
• 1997

In this paper, control scheme of the three phase VSI(Voltage Source Inverter) for 200KVA UPS is described. The proposed controller is designed to robust against parameter variations, disturbances and load change using PI controller. The switching pattern is determined to Ramp Comparison Method. The inverter provides pure sinusoidal output voltage with very low THD (Total Harmonic Distortion). Finally, the performance of the proposed inverter is shown by experimental result.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.543-545
• /
• 1996

In this paper, a voltage and current control scheme of a three-phase voltage source inverter for UPS is described. The inverter provides pure sinusoidal output voltage with very low THD(Total Harmonic Distortion). The proposed controller is designed to robust against the load change, parameter variations, and disturbances using PI controller. The switching pattern is determined to Space Vector Modulation. Finally, the performance of the proposed inverter is shown and discussed by simulation.

• Journal of Power Electronics
• /
• 제16권4호
• /
• pp.1387-1395
• /
• 2016

A method for the identification of mechanical parameters based on integral calculation is presented. Both the moment of inertia and the friction constant are identified by the method developed here, which is based on well-known mechanical differential equations. The mechanical system under test is excited according to a pre-determined low-frequency sinusoidal motion, minimizing the distortion, and increasing the accuracy of the results. The parameters are identified using integral calculation, increasing the robustness of the results against measurement noise. Experimental data are supported by simulation, confirming the effectiveness of the proposed technique. The performance improvements shown here are of use in the design of speed and position controllers and observers. Owing to its simplicity, this method can be readily applied to commercial inverter products.

• Steel and Composite Structures
• /
• 제35권6호
• /
• pp.753-763
• /
• 2020

In this article, the influence of fuzzified uncertain composite elastic properties on non-linear deformation behaviour of the composite structure is investigated under external mechanical loadings (uniform and sinusoidal distributed loading) including the different end boundaries. In this regard, the composite model has been derived considering the fuzzified elastic properties (through a triangular fuzzy function, α cut) and the large geometrical distortion (Green-Lagrange strain) in the framework of the higher-order mid-plane kinematics. The results are obtained using the fuzzified nonlinear finite element model via in-house developed computer code (MATLAB). Initially, the model accuracy has been established and explored later to show the dominating elastic parameter affect the deflection due to the inclusion of fuzzified properties by solving a set of new numerical examples.

• Journal of Power Electronics
• /
• 제15권6호
• /
• pp.1517-1523
• /
• 2015

The wavelet PWM (WPWM) technique has been applied in two-level inverters successfully, but directly applying the WPWM technique to three-level inverters is impossible. This paper proposes a WPWM technique suitable for a single-phase three-level inverter. The work analyzes the control strategy with the WPWM and obtains the design of its parameters. Compared with the SPWM technique for a single-phase three-level inverter under the same conditions, the WPWM can obtain high magnitudes of the output fundamental frequency component, low total harmonic distortion, and simpler digital implementation. The feasibility experiment is given to verify of the proposed WPWM technique.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1999년도 전력전자학술대회 논문집
• /
• pp.278-281
• /
• 1999

In a utility interactive photovoltaic system, a PWM inverter is used for the connection between the photovoltaic arrays and the utility. The DC current becomes pulsated causes the distortion of the AC current waveform. This paper presents the reduced pulsation of DC input current by operating the inverter with buck-boost chopper in the discontinuous conduction mode. The DC current with contains harmonics component is analyzed by means of separating into two terms of a ripple component and a direct component. The constant DC current without pulsation is supplied from photovoltaic array to the inverter. The proposed inverter system provide a sinusoidal AC current for domestic loads and the utility line with unity power factor.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1999년도 전력전자학술대회 논문집
• /
• pp.323-326
• /
• 1999

For decrease the harmonic current components of the power source, a first method is insert the choke coil that used the choke input type rectifier, the booster chopper circuit and buck chopper circuit. And the several method are studying like as the PWM(Pulse Width Modulation) converter and the active filter type which is used the high frequency switching and the sinusoidal wave formed input current. In this type, there are many problem as a low efficiency, increased the noise, the high leakage current and cost up by the high frequency switching. For improve this problems, the partial resonan method is used on the booster inducter and lossles snubber condenser. This method decreased the distortion factor has lower harmonic components than the hard switching and there is no switching loss by the ZCS(Zero Current Switching) at switch turn-on and the ZVS(Zero Voltage Swithcing) at switch turn-off

• 디지털콘텐츠학회 논문지
• /
• 제6권1호
• /
• pp.35-39
• /
• 2005

2차원 영상에서 물체의 3차원 정보를 얻는 문제는 컴퓨터 시각 연구에서 매우 중요한 위치를 차지하고 있다. 하지만 대부분의 연구는 2차원 영상의 기하학적인 변화를 분석하는데 초점을 두었기 때문에 복잡한 계산과 많은 시간이 필요하고 고가의 장비를 요구한다. 본 논문에서는 먼저, 물체에 정현파 형태의 패턴을 능동적으로 투영한다. 그리고 물체의 형체에 따라 일어나는 왜곡으로부터 위상의 변화 추출, 이를 깊이 정보를 추정하는데 이용하는 방법을 제안한다.