• Journal of the Korean Society for Nondestructive Testing
• /
• v.33 no.4
• /
• pp.336-341
• /
• 2013

In this paper, the design concept of a low-temperature vacuum blackbody was described, and thermophysical model of the blackbody was numerically evaluated. Also the working performance of low-temperature vacuum blackbody was evaluated using infrared camera system. The blackbody system was constructed to operate under high-vacuum conditions ($2.67{\times}10^{-2}$ Pa) to reduce temperature uncertainty, which is caused by vapor condensation at low temperatures usually below 273 K. In addition, both heat sink and heat shield including cold shield were installed around radiator to prevent heat loss from the blackbody. Simplified mathematical model of blackbody radiator was analyzed using modified Stefan-Boltzmann's rule. The infrared radiant performance of the blackbody was evaluated using infrared camera. Based on the results of measurements, and simulation, temperature stability of the low-temperature vacuum blackbody demonstrated that the blackbody system can serve as a highly stable reference source for the calibration of an infrared optical system.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.31 no.2
• /
• pp.214-219
• /
• 1986

This study was conducted to provide basic information to breeders and agronomists working with sesame. Grain filling rate were investigated for eight plant types classified by branching habit, capsules per axil, carpels and loculi of a capsule. Two typical cultivars were chosen for plant type among 527 gene pools. Grain filling rate didn't increase with little difference between lower and middle part capsules, Jut significantly decreased in upper part. Grain filling rate of lower part, main stem and center capsules appeared higher than that of upper part, branch and side capsule for grain filling. Mono-capsule setting and unbranched plant type were higher for grain filling than tricapsule setting and branched type due to inactive ripenness on branched capsule. NMB type showed that best maturity and relatively good grain filling in BTB type despite it's largest sink capacity. NTQ and BTQ type appeared poor ripenness because of immaturity of higher part side capsules; however it was believed that there were still possibilities for improving ripenness in 3 capsule and 4 carpels 8 loculi type by the good maturity of 1 capsule and 4 carpels 8 loculi type.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.4
• /
• pp.587-592
• /
• 2023

Plant growth is regulated by a variety of factors, including organic matter availability. Organic nutrients are carbohydrate molecules from photosynthetic products produced by tissues associated with carbon and energy fixation called "sources". These compounds flow through plant vascular bundles into non-photosynthetic or growing tissues called "sinks". Among these possible compounds, the disaccharide fructosyl glucose, sucrose, is the most representative. During the transport of sucrose, the pathway from the source to the sinks can include hydrolysis of sucrose into glucose and fructose derivatives or direct transfer of sucrose. Among the enzymes involved in this, β-D-fructofuranosidase is the most important. Soluble neutral β-D-fructofuranosidase, one of several isoenzymes, is located in intracellular protoplasts and helps plant cells metabolize sucrose to produce energy. In order to track the activity of this enzyme during the course of plant growth, histological methods were used for the most effective immunolocalization. As a result, the activity was higher in the phloem and epidermis than in the mesophyll tissue in the leaf. In the growing stem, activity was high in the phloem, epidermis, and cortex. The activity of the root, which is a sink tissue, was high in all parts, but especially the highest in the root tip part. It is thought that this is because it helps unloading of sucrose in sink tissues that require sucrose degradation and plays a role in hydrolysising sucrose.

• Geophysics and Geophysical Exploration
• /
• v.19 no.3
• /
• pp.121-130
• /
• 2016

Several factors are discussed that should be considered in measuring thermal conductivity of rock cores with a PEDB (potable electronic divided bar) system, which is relatively accurate and easy to operate, and can measure the thermal conductivity of rock cores for various diameters. Then the system is applied to measure thermal conductivity of 70 rock cores from Ulleung Island. Air temperature affects most on the thermal conductivity measurements, so that it is very important to minimize the temperature change during the measurement. Other factors such as the temperature of heat source, averaging time window on the thermal conductivity measurements do not affect much compared to air temperature. Slightly higher thermal conductivity is measured when using the thermal contact paste between the sample and heat source or heat sink. Especially, rock cores with irregular surface showed bigger difference. Repeatability showed less than ${\pm}0.3%$ for standard samples and less than ${\pm}4%$ for rock samples, respectively, when the room temperature changes within $1^{\circ}C$ during the measurements. Thermal conductivity of the rock cores from Ulleung Island roughly increases as depth increases but does not show any dependency on the rock types.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.17 no.2
• /
• pp.116-121
• /
• 2014

In order to study the improvement of the multi stage regeneration cycles, muti-stage processes were applied to the cycles, respectively or together. The kinds of the cycles are multi stage reheater cycle (MS) and multi stage reheater regeneration cycle (MSR). Working fluid used was R134a and R245fa. Temperature of the heat source was $65^{\circ}C$, $75^{\circ}C$, and $85^{\circ}C$, and temperature of the heat sink was $5^{\circ}C$. Optimization simulation was conducted for improving the gross power and efficiency with multi stage reheater regeneration cycle for ocean thermal energy conversion(OTEC) with changing of a heat source, kind of the working fluid, and type of the cycle. Performance analysis of the various components was simulated by using the Aspen HYSYS for analysis of the thermodynamic cycle. R245fa shows better performance than R134a. This paper showed the most suitable working fluid with changing of a heat source and the kinds of working cycle. Compared to each other, MS showed better performance at gross power and MSR showed higher cycle efficiency.

• Korean Journal of Ecology and Environment
• /
• v.49 no.1
• /
• pp.51-61
• /
• 2016

This study was carried out to assess the carbon budget of two urban parks and one natural park and to prepare the plan for improving the ecological functions of the park including carbon sink. Net Ecosystem Production (NEP) of those study sites was calculated from the relationship between Net Primary Production (NPP) and soil respiration of each study site. To understand carbon budget of the whole area designated as the park, carbon budget of the urban park was analyzed by classifying the vegetated and the non-vegetated zones. NEP of the Nohae and the Sanggye parks calculated by reflecting areal size that the non-vegetated zones occupy were shown in -1.0 and $0.6\;ton\;C\;ha^{-1}yr^{-1}$, respectively. On the other hand, NEP of Mt. Bulam natural park as a reference site was in $2.3\;ton\;C\;ha^{-1}yr^{-1}$. Based on the result, the Nohae park was assessed as carbon source rather than carbon sink. On the other hand, the Sanggye park was classified as carbon sink but the role was poor compared with natural park. The result is, first of all, due to lower NPP of the vegetation introduced for the parks compared with natural vegetation. The other reason is due to wide arrangement of non-vegetated zone. To solve those problems and thereby to create the urban park with high ecological quality, selection of plant species suitable for the ecological characteristic of the park, their arrangement imitated natural vegetation, and ecological zoning were recommended.

• Korean Journal of Soil Science and Fertilizer
• /
• v.46 no.6
• /
• pp.652-658
• /
• 2013

A huge number of greenhouse soils in Korea have accumulated mineral elements which induce many nutritional and pathological problems. The present study was performed to the effects of the reduced fertilization on plant growth, and uptake and partitioning of minerals (N, P, K) and soluble carbohydrates using highly minerals-accumulated farmer's greenhouse soil. On the basis of the recommended application for tomato crop, the application rates of N, P and K were 110(50%)-5.2(5%)-41.5(35%)kg $ha^{-1}$, respectively, using Hoagland's nutrient solution. Tomato growth rates during the whole experiment were not significant between treatments, but it was found that a decrease in daily growth represented after 60 days of treatment (DAT). The reduced application led to a drastic decrease in the concentration of N, P and K in fruits, and, thus, this resulted in lower uptake after 40 DAT. The lower phloem export and utilization of soluble carbohydrates caused an accumulation of extra-carbohydrates in leaves, stems and fruits in the reduced application. The reduced fertilization induced the capture of N, P and K in leaves and of soluble carbohydrates in stems compared to the conventional application. In this study, we suggest that it is possible to delay the first fertigation time in minerals-accumulated soils without an adverse impact on crop growth, but it is necessary to regularly monitor mineral status in soil to ensure a balanced uptake, synthesis and partitioning of minerals and carbohydrates.

• Asian Journal of Atmospheric Environment
• /
• v.5 no.4
• /
• pp.263-277
• /
• 2011

Global atmospheric $CO_2$ distributions were simulated with a chemical transport model (GEOS-Chem) and compared with space-borne observations of $CO_2$ column density by GOSAT from April 2009 to January 2010. The GEOS-Chem model simulated 3-D global atmospheric $CO_2$ at $2^{\circ}{\times}2.5^{\circ}$ horizontal resolution using global $CO_2$ surface sources/sinks as well as 3-D emissions from aviation and the atmospheric oxidation of other carbon species. The seasonal cycle and spatial distribution of GEOS-Chem $CO_2$ columns were generally comparable with GOSAT columns over each continent with a systematic positive bias of ~1.0%. Data from the World Data Center for Greenhouse Gases (WDCGG) from twelve ground stations spanning $90^{\circ}S-82^{\circ}N$ were also compared with the modeled data for the period of 2004-2009 inclusive. The ground-based data show high correlations with the GEOS-Chem simulation ($0.66{\leq}R^2{\leq}0.99$) but the model data have a negative bias of ~1.0%, which is primarily due to the model initial conditions. Together these two comparisons can be used to infer that GOSAT $CO_2$ retrievals underestimate $CO_2$ column concentration by ~2.0%, as demonstrated in recent validation work using other methods. We further estimated individual source/sink contributions to the global atmospheric $CO_2$ budget and trends through 7 tagged $CO_2$ tracers (fossil fuels, ocean exchanges, biomass burning, biofuel burning, net terrestrial exchange, shipping, aviation, and CO oxidation) over 2004-2009. The global $CO_2$ trend over this period (2.1 ppmv/year) has been mainly driven by fossil fuel combustion and cement production (3.2 ppmv/year), reinforcing the fact that rigorous $CO_2$ reductions from human activities are necessary in order to stabilize atmospheric $CO_2$ levels.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.14 no.4
• /
• pp.257-263
• /
• 2011

The budgets of fresh water, salt and nutrients were estimated in order to clarify the characteristics of material cycle in the Gamak Bay in 2006 with Simple Box budget Model. Outflow volume of freshwater into system was approximately $-174.2{\sim}72.5{\times}10^3m^3/day$. Inflow masses of DIP and DIN were approximately 397.0~1158 mole/day and 1750~8328 mole/day, respectively. The Source or sink of DIP was under the control of the variation of fresh water budget in the system. the mass balance and NEM was largely determined by flushing time of material.

• Korean Institute of Interior Design Journal
• /
• v.21 no.1
• /
• pp.258-268
• /
• 2012

The bathroom is a space where humans fulfil certain daily needs, but for the disabled, it can be the most difficult space to use and may even be a cause of accidents and a source of danger. Previous studies on the bathroom have mostly proposed an ideal model of bathroom, but the majority of disabled people live in small homes of about $50m^2$ in size. As their bathrooms are usually very small, and existing houses have various structural limitations, more research should be conducted on the remodeling of residential bathrooms. This study analyzed a number of remodeling items in bathrooms, all of which were listed in previous studies. Based on 17 cases of residential bathroom remodeling in the homes of disabled people residing in Incheon in 2009, this study analyzed several remodeling items required according to the subject's characteristics, such as a lifestyle, gender, and family composition; and proposed the following remodeling requirements and improvement measures for ambulatory-disabled persons and sedentary-disabled people. First, as ambulatory-disabled people have lower-limb impairments, they required bathroom remodeling designed to improve their mobility in the bathroom. These subjects desired the installation of grab bars, as well as the elimination of floor level differences, the installation of non-slip flooring, a counter-top, a sink stand, and a shower holder whose height can be adjusted. Second, sedentary-disabled people move around in a sitting or crawling position, so many of them asked to eliminate floor level differences and vertically-installed bathroom furnishings. Basically, both people with ambulatory disabilities and people with non-ambulatory impairments requested the elimination of floor level differences and the installation of non-slip flooring and grab bars for the toilet and bathtub. They also asked for the heights of sinks, faucets, mirrors, shower holders, and cabinets to be adjusted to suit their needs.